Monthly, seasonal and annual trends of daily minimum, mean and maximum surface air temperature change (degrees Celsius) based on homogenized station data (AHCCD) are available. Trends are calculated using the Theil-Sen method using the station’s full period of available data. The availability of temperature trends will vary by station; if more than 5 consecutive years are missing data or more than 10% of the data within the time series is missing, a trend was not calculated.

This dataset includes fifteen GeoTIFFs of Sea Surface Temperature (SST) organized into five distinct marine regions along Canada's Pacific coast, derived from Sentinel 3 satellite data for the period of April-September 2017. For each region, three GeoTIFFs are provided which represent the mean, maximum, and standard deviation values of SST (degrees Celcius). Jupyter notebooks with Python code used for data downloading and processing are also included for reference.The primary objective of this dataset is to provide detailed, regional spatial information on SST for key areas of Canada's Pacific coast, including the nearshore environment. The data can be used for various applications including species distribution modelling.This dataset is intended to fill the knowledge gap by providing high-resolution, spatially explicit regional SST data for Canada's Pacific coast. Existing datasets may not provide sufficient spatial resolution or may not include comprehensive statistical measures (mean, max, standard deviation) of SST for these specific areas.The dataset is structured by region. For each of the five regions, a set of three related GeoTIFFs is provided, representing the mean, max, and standard deviation of SST. Within each regional set, the three layers share the same spatial reference system, resolution, and extent, making them suitable for direct use in analytical stacks (e.g., for species distribution models).The Sentinel-3 satellites, part of the European Union's Copernicus Programme, are equipped with the Sea and Land Surface Temperature Radiometer (SLSTR) which measures SST among other parameters. The SST data products in this dataset are derived from Sentinel-3 satellite data.The intent of the data is to represent the marine environment and so a mask that excludes land was applied during data download and extraction. The SST data products have been resampled using a bilinear interpolation from their native resolution to a 20 m resolution to provide more detailed spatial information.

Mean Temperature Difference From Normal values are computed by subtracting the normal monthly average temperature from the average monthly temperature of the month. The average monthly temperature is computed by obtaining the mean value of average daily temperatures for a month. If the month was colder than normal the value computed will be negative and if it was warmer the value will be positive.

Crop Heat Units (CHU) are calculated on a daily basis, using the maximum and minimum temperatures in order to account for a crop’s negative response to higher temperatures.The formula used to calculate the CHU value for a day is: (1.8 × (Minimum Temperature − 4.4) + 3.33 × (Maximum Temperature − 10) − 0.084 × (Maximum Temperature − 10)²) ÷ 2.0CHU values are only accumulated during the Growing Season, April 1 through October 31.

Difference from Normal Temperature values are computed by subtracting the normal monthly average temperature from the average monthly temperature of the month. The average monthly temperature is computed by obtaining the mean value of average daily temperatures for a month. If the month was colder than normal the value computed will be negative and if it was warmer the value will be positive.Long-term average is 1991-2020.The National Agroclimate Series of Derived Indicators (NASDI) products provide a collection of comprehensive and regularly updated datasets on key agroclimatic variables, including accumulated precipitation, standardized precipitation index, and difference from normal temperature, among others. These datasets incorporate both real-time and historical climate information, offering enhanced insight into conditions and trends across Canada’s diverse agricultural regions.

Minimum Temperature represents the lowest recorded temperature value (°C) at each location for a given time period. Time periods include the previous 24 hours and the previous 7 days from the available date where a climate day starts at 0600UTC.

Statistically downscaled multi-model ensembles of projected change (also known as anomalies) in mean temperature (°C) are available at a 10km spatial resolution for 1951-2100. Statistically downscaled ensembles are based on output from twenty-four Coupled Model Intercomparison Project Phase 5 (CMIP5) global climate models (GCM). Downscaled daily mean temperature was calculated by averaging downscaled daily minimum and maximum temperature. Daily minimum and maximum temperature from GCM outputs were downscaled using the Bias Correction/Constructed Analogues with Quantile mapping version 2 (BCCAQv2). Historical gridded minimum and maximum temperature datasets of Canada (ANUSPLIN) were used as the respective downscaling targets. Projected change in mean temperature (°C) is with respect to the reference period of 1986-2005. Seasonal and annual averages of projected mean temperature change to 1986-2005 are provided. Specifically, the 5th, 25th, 50th, 75th and 95th percentiles of the downscaled ensembles of mean temperature change are available for the historical time period, 1901-2005, and for emission scenarios, RCP2.6, RCP4.5 and RCP8.5, for 2006-2100. Twenty-year average changes in statistically downscaled minimum mean temperature (°C) for four time periods (2021-2040; 2041-2060; 2061-2080; 2081-2100), with respect to the reference period of 1986-2005, for RCP2.6, RCP4.5 and RCP8.5 are also available in a range of formats. The median projected change across the ensemble of downscaled CMIP5 climate models is provided. Note: Projections among climate models can vary because of differences in their underlying representation of earth system processes. Thus, the use of a multi-model ensemble approach has been demonstrated in recent scientific literature to likely provide better projected climate change information.

Maximum Temperature represents the highest recorded temperature value (°C) at each location for a given time period. Time periods include the previous 24 hours and the previous 7 days from the available date where a climate day starts at 0600UTC.

Statistically downscaled multi-model ensembles of mean temperature are available at a 10km spatial resolution for 1951-2100. Statistically downscaled ensembles are based on output from twenty-four Coupled Model Intercomparison Project Phase 5 (CMIP5) global climate models (GCM). Downscaled daily mean temperature was calculated by averaging downscaled daily minimum and maximum temperature. Daily minimum and maximum temperature from GCM outputs were downscaled using the Bias Correction/Constructed Analogues with Quantile mapping version 2 (BCCAQv2). Historical gridded minimum and maximum temperature datasets of Canada (ANUSPLIN) were used as the respective downscaling targets. The 5th, 25th, 50th, 75th and 95th percentiles of the monthly, seasonal and annual ensembles of downscaled mean temperature (°C) are available for the historical time period, 1951-2005, and for emission scenarios, RCP2.6, RCP4.5 and RCP8.5, for 2006-2100. Note: Projections among climate models can vary because of differences in their underlying representation of earth system processes. Thus, the use of a multi-model ensemble approach has been demonstrated in recent scientific literature to likely provide better projected climate change information.

Statistically downscaled multi-model ensembles of projected change (also known as anomalies) in maximum temperature (°C) are available at a 10km spatial resolution for 1951-2100. Statistically downscaled ensembles are based on output from twenty-four Coupled Model Intercomparison Project Phase 5 (CMIP5) global climate models (GCM). Daily maximum temperature from GCM outputs were downscaled using the Bias Correction/Constructed Analogues with Quantile mapping version 2 (BCCAQv2). A historical gridded maximum temperature dataset of Canada (ANUSPLIN) was used as the downscaling target. Projected change in maximum temperature (°C) is with respect to the reference period of 1986-2005. Seasonal and annual averages of projected maximum temperature change to 1986-2005 are provided. Specifically, the 5th, 25th, 50th, 75th and 95th percentiles of the downscaled ensembles of maximum temperature change are available for the historical time period, 1901-2005, and for emission scenarios, RCP2.6, RCP4.5 and RCP8.5, for 2006-2100. Twenty-year average changes in statistically downscaled maximum temperature (°C) for four time periods (2021-2040; 2041-2060; 2061-2080; 2081-2100), with respect to the reference period of 1986-2005, for RCP2.6, RCP4.5 and RCP8.5 are also available in a range of formats. The median projected change across the ensemble of downscaled CMIP5 climate models is provided. Note: Projections among climate models can vary because of differences in their underlying representation of earth system processes. Thus, the use of a multi-model ensemble approach has been demonstrated in recent scientific literature to likely provide better projected climate change information.