The Ministry of Environment operates a network of continuous ambient air monitoring stations to measure the concentration of air pollutants across Saskatchewan. This is considered 'raw data' that has not undergone quality control and quality assurance. 'Raw data' is not intended to provide medical or health care advice and should not be used in published documents. For best results download the entire dataset without filtering as a CSV. ‘Date and time’ as displayed is your local time. However, downloaded data is in UTC for ‘Date and time’. Any values of -9999, -999, or 9980 are invalid data.The Ministry of Environment operates a network of continuous ambient air monitoring stations. These stations are part of the National Air Pollution Surveillance (NAPS) network. Continuous ambient air monitoring stations measure the concentration of air pollutants across Saskatchewan. The data is used to:  • track and report on progress for achieving air quality objectives • measure representative pollutant concentrations and determine long-term trends and • provide air quality information to the public Air pollutants typically come from various industrial activity and natural sources, such as mining, oil and gas, agriculture, forest fires, electrical generation, and the transportation sector. Disclaimer: Hourly data contained on this website is automatically updated daily from Saskatchewan Ministry of Environment monitoring stations and is intended for informational purposes only. This is considered ‘raw data’ and may contain errors. 'Raw data' is not intended to provide medical or health care advice and should not be used in published documents. Data integrity and validity may be affected by instrument malfunctions, instrument calibrations or power failures.  For more information please visit the ministry's Air Quality Monitoring page or contact the Ministry of Environment Inquiry Centre: centre.inquiry@gov.sk.ca 1-800-567-4224  

The Ministry of Environment operates a network of continuous ambient air monitoring stations to measure the concentration of air pollutants across Saskatchewan. This is considered 'raw data' that has not undergone quality control and quality assurance. 'Raw data' is not intended to provide medical or health care advice and should not be used in published documents. For best results download the entire dataset without filtering as a CSV. ‘Date and time’ as displayed is your local time. However, downloaded data is in UTC for ‘Date and time’. Any values of -9999, -999, or 9980 are invalid data.The Ministry of Environment operates a network of continuous ambient air monitoring stations. These stations are part of the National Air Pollution Surveillance (NAPS) network. Continuous ambient air monitoring stations measure the concentration of air pollutants across Saskatchewan. The data is used to:  • track and report on progress for achieving air quality objectives • measure representative pollutant concentrations and determine long-term trends and • provide air quality information to the public Air pollutants typically come from various industrial activity and natural sources, such as mining, oil and gas, agriculture, forest fires, electrical generation, and the transportation sector. Disclaimer: Hourly data contained on this website is automatically updated daily from Saskatchewan Ministry of Environment monitoring stations and is intended for informational purposes only. This is considered ‘raw data’ and may contain errors. 'Raw data' is not intended to provide medical or health care advice and should not be used in published documents. Data integrity and validity may be affected by instrument malfunctions, instrument calibrations or power failures.  For more information please visit the ministry's Air Quality Monitoring page or contact the Ministry of Environment Inquiry Centre: centre.inquiry@gov.sk.ca 1-800-567-4224  

**PLEASE NOTE:** The Environmental Monitoring System will be replaced by the EnMoDS system on March 5th, 2026. The EMS results objects will not contain new data after Feb 26th, 2026. For recent data please refer to [EnMoDS spatial locations and location groups](https://catalogue.data.gov.bc.ca/dataset/f60fa4b5-e3d0-44ad-b5d8-778d29764e34). Environmental Monitoring Stations (EMS) spatial points coverage for the Province by LOCATION TYPES. The following spatial layers reference this as a data source: 1. Environmental Monitoring - All Stations 2. Environmental Monitoring Stations - Air Monitoring (Ambient Air Site) 3. Environmental Monitoring Stations - Air Monitoring (Air Permit) 4. Environmental Monitoring Stations - Water Sites (Water Monitoring) 5. Environmental Monitoring Stations - Water Sites (Water Permits) 6. Environmental Monitoring Stations - Water Sites (Well) 7. Environmental Monitoring Stations - Water Sites (Observation Well) 8. Environmental Monitoring Stations - Water Sites (Spring)

The Aquatic Invasive Species Surveillance Database is a compilation of fish community and habitat data from DFO’s Aquatic Invasive Species and Invasive Carp Program early detection surveillance efforts in Canadian waters of the Great Lakes basin. Data includes: sampling site location, date, fish species and counts, and associated habitat information. Annual project-specific details including purpose/objectives and study methodology are often reported in the DFO Canadian manuscript report of fisheries and aquatic sciences series.

The Canadian Nuclear Safety Commission (CNSC) is publishing a database with environmental monitoring results collected as part of the Eastern Athabasca Regional Monitoring Program. The samples are collected near communities located in northern Saskatchewan.

A wide range of different territorial, federal, and first nation governments have a role in monitoring water. The water monitoring sites data set compiles these varied sources into a single source with the intent to provide a 'one-stop shop' when searching for water monitoring data. Information contained includes the 'who, what, when, and where' of water monitoring by providing contact information, sample type, sample period, and location.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This dataset provides the results obtained by Health Canada’s Radiological Monitoring Network (CRMN) for tritium content in atmospheric water vapor sampled from monitoring stations in Ontario, Quebec and New Brunswick. More information about the CRMN network can be found on the Health Canada website (see link below). The results provided are for tritium activity concentration, expressed in units of becquerels per cubic meter (Bq/m3). Atmospheric water is sampled monthly for determination of tritium content. The majority of such monitoring activity occurs in close proximity to nuclear power plants. Until 1996, Health Canada monitored the areas near Darlington, Bruce and Pickering in Ontario, Gentilly in Quebec, and Point Lepreau in New Brunswick. In 1996, Health Canada’s monitoring of the Ontario stations was terminated to avoid redundancy, since a similar initiative was underway through the Ontario Ministry of Labour. Currently, the CRMN monitors six sites in the vicinity of Point Lepreau, four sites in the vicinity of Gentilly, and a single site in the Greater Toronto Area. The average tritium concentration for the CRMN stations is 0.22 Bq/m3 for the time period from 2004 to 2013. This is consistent with results reported for other monitoring stations in close proximity to Canadian nuclear power stations, and the levels are considered to be safe from a health perspective. Note that the tritium values are measured using liquid scintillator measurements. This requires removing the background contribution from the measurement. The uncertainty associated with each measurement, can lead to reported values of less than zero. The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

**PLEASE NOTE:** The Environmental Monitoring System will be replaced by the EnMoDS system on March 5th, 2026. The EMS results objects will not contain new data after Feb 26th, 2026. For recent data please refer to [EnMoDS spatial locations and location groups](https://catalogue.data.gov.bc.ca/dataset/f60fa4b5-e3d0-44ad-b5d8-778d29764e34). Environmental monitoring stations (EMS) points coverage for the Province by MONITORING LOCATION GROUPS.

Table of animal samples requested for rabies testing in Manitoba since the province took over the rabies program on April 1, 2014.This table contains information on animal samples requested for rabies testing in Manitoba since the province took over the rabies program on April 1, 2014.  As of that date, the Canadian Food Inspection Agency (CFIA) is no longer involved with managing rabies cases in Manitoba. The provincial Rabies Management Program is now coordinated by Manitoba Rabies Central, which is a collaborative effort involving the Manitoba departments of Health, and Environment, Climate and Parks. Samples for rabies testing are requested by Manitoba Health in cases of human exposure to a suspected rabid animal, and by Agriculture in the case of animal exposure to another suspect rabid animal. Collection of a sample from the suspect rabid animal is coordinated by Agriculture.  This information will be updated on a quarterly basis. This data is used in the Manitoba Rabies Surveillance Dashboard. Fields included (Alias (Field Name): Field Description.) Region (Region): Regional health authority where the affected person or animal was exposed Fiscal Year (Fiscal_Year): Government of Manitoba fiscal year (April 1-March 31) when the rabies testing was requested Date (Date): Date when the sample for rabies testing was requested Year (Year): Calendar year (January 1-December 31) when the sample for rabies testing was requested Species (Species): Animal species of the sample requested for rabies testing Result (Result): Laboratory result of the sample tested for rabies.

The purpose of this dataset is to give a an accurate representation of the game hunting boundaries in Manitoba.Please refer to the Manitoba Game Hunting Areas dataset . Game Hunting Areas (GHAs) are defined under the Hunting Areas and Zones Regulation (220/86) of The Wildlife Act (CCSM c. W130). Game Hunting Areas are used to support boundaries for species specific hunting seasons, harvest allocations, bag limits and associated regulations. Refer to the Hunting Areas and Zones Regulation for GHA boundary descriptions.Fields Included (Alias (Field Name): Field description) OBJECTID (OBJECTID): s equential unique whole numbers that are automatically generated GHA (GHA): the n umber assigned to each Game Hunting Area Shape_Length (Shape_Length): the l ength of the feature in internal units Shape_Area (Shape_Area): a rea of the feature in internal units squared