A chlorophyll fluorescence time series was collected at various locations around the coast of Vancouver Island, British Columbia, Canada for monitoring phytoplankton concentrations. A Wetlabs ECO fluorometer was deployed every few months on a schedule depending on season and sensor availability. The instrument hung by a chain attached to the side of the buoy, or dock, depending on location, and measured chlorophyll using the fluorescence emission at 695nm. The instrument also measured turbidity by detecting the scattered light at 700nm. The units had internal batteries and data storage and were programmed to make a group of 5 measurements every 30 minutes. A copper wiper covered the sampling window between groups of measurements to reduce fouling. Times are in UTC unless otherwise stated.

This study aimed to identify chemical components that could distinguish chemical mixtures in oil sands process-affected water (OSPW) from natural groundwater sources. Oil sands process-affected samples were collected from two different oil sands development tailing ponds, and natural groundwater samples were collected from both far-field (greater than one kilometer (>1km) down- or upstream from an oil sands development site), and near-field (less than 200 meters (<200m) from an oil sands development site) locations.Water samples were assessed by geochemistry, total naphthenic acid analysis, and synchronous fluorescence spectroscopy (SFS) identifying those samples with acid-extractable organics (AEO). Using electrospray ionization high resolution mass spectrometry as well as multidimensional gas chromatography time-of-flight mass spectrometry profiling allowed for differentiation of natural from OSPW sources through the measurement of O2 : O4 ion class ratios. AEO profiles from OSPW and groundwater samples adjacent to tailings ponds were similar, suggesting a common source.All data are a part subject of a publication containing method details, full QA/QC, interpretation, and conclusions: Frank, R. A., Roy, J. W., Bickerton, G., Rowland, S. J., Headley, J. V., Scarlett, A. G., West, C. E., Peru, K. M., Parrott, J. L., Conly, F. M., & Hewitt, L. M. (2014). Profiling oil sands mixtures from industrial developments and natural groundwaters for source identification. Environmental science & technology, 48(5), 2660–2670. doi.org/10.1021/es500131kResponse to comment: Frank, R. A., Roy, J. W., Bickerton, G., Rowland, S. J., Headley, J. V., Scarlett, A. G., West, C. E., Peru, K. M., Parrott, J. L., Conly, F. M., & Hewitt, L. M. (2014). Response to Comment on "Profiling oil sands mixtures from industrial developments and natural groundwaters for source identification". Environmental science & technology, 48(18), 11015–11016. doi.org/10.1021/es504008z

Moored instrument time series data include current velocity, temperature, salinity, oxygen, fluorescence, transmissivity, turbidity, and particle capture of carbon, nitrogen, and silicon as well as sediment trap, ice drift and ice draft data.These data were collected by researchers from the Institute of Ocean Sciences, Sidney, BC, from locations ranging from the North Pacific, the Beaufort Sea, and across the Canadian Arctic Archipelago to Baffin Bay.

Moored instrument time series data include current velocity, temperature, salinity, oxygen, fluorescence, transmissivity, turbidity, sediment trap data and particle capture of carbon, nitrogen, and silicon.These data were collected by researchers from the Institute of Ocean Sciences, Sidney, BC, from locations in the North Pacific.The data links below are only a representative sample of the entire collection. If you require more data, please send your request to the data contact.

Moored instrument time series data include current velocity, temperature, salinity, oxygen, fluorescence, transmissivity, turbidity, and particle capture of carbon, nitrogen, and silicon. Also included are sediment trap, ice drift and ice draft data.These data were collected by researchers from the Institute of Ocean Sciences, Sidney, BC, from locations ranging from the Beaufort Sea, and across the Canadian Arctic Archipelago to Baffin Bay.The data links below are only a representative sample of the entire collection. If you require more data, please send your request to the data contact.

Terrestrial gamma dose rates, reported as ambient dose equivalent in the unit nSv/hr, are presented for the past ninety days to present. Data is measured in real-time, typically from the spectroscopic dosimeters of the Fixed Point Surveillance (FPS) Network. Dosimeter stations of this network are located in population centres and other strategic locations across Canada. Real-time data provides insight into typical levels and fluctuations of radioactivity in the Canadian environment and may provide early detection of sources of radioactivity other than environmental background.As a reference, the Nuclear facilities and uranium mines and mills can be found in the Open Maps catalogue and added to the Real-time Environmental Radioactivity Monitoring map using the "+" (Add layer) button of the viewer’s “Layers” panel. The ESRI REST or WMS links found in the Nuclear facilities and uranium mines and mills metadata record is what’s needed to proceed. These links can be found here: https://open.canada.ca/data/en/dataset/6478153c-829f-4649-bd52-41f63b41021f.The Nuclear facilities and uranium mines and mills dataset provided by the Canadian Nuclear Safety Commission corresponds to nuclear licensees that operate across Canada. This includes uranium mines and mills, uranium processing facilities, nuclear power plants, research reactors, particle accelerators, and nuclear substances processing facilities. All of these facilities are licensed by the CNSC and are subject to strict regulatory oversight to ensure the safety of the public and the environment.

This dataset shows the location of the distribution of uranium deposits for the Province of Saskatchewan.This dataset shows the uranium deposits for the Province of Saskatchewan and is designed for the Resource Map of Saskatchewan. Mapping in support of the dataset includes years of field observations which were then compiled and integrated into this dataset. The data was created as a file geodatabase feature class and output for public distribution. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule. 

This dataset provides results obtained by Health Canada’s Canadian Radiological Monitoring Network (CRMN) for 90Sr activity in milk samples originating from various locations across Canada. More information about the CRMN network can be found on the Health Canada website (see link below). From 1984 to 1993, data was collected from 20 locations. After 1993, routine milk analysis for radio-strontium activity was discontinued for all monitoring stations, except the Ottawa location. The results provided here are 90Sr activity concentrations in units of becquerels per litre (Bq/L). Milk is an important matrix for environmental radioactivity assessment since many radionuclides of health concern exhibit efficient soil to milk uptake pathways. As such, the surveillance of milk provides a very good indication as to the severity of environmental impact following a nuclear event. Strontium-90 (90Sr) is a radionuclide of particular concern because it has a long radiological and biological half-life coupled with a high affinity for incorporation into human bone and teeth. Nuclear weapons testing and nuclear accidents have released such long-lived radionuclides into the atmosphere, which in turn have entered the biological life cycle. Nevertheless, a steady decline in the activity concentration of 90Sr in milk can be seen since most of the nuclear weapon testing was halted in the 1960s. The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

The Canadian Nuclear Safety Commission (CNSC) is publishing a database with environmental monitoring results collected as part of the Eastern Athabasca Regional Monitoring Program. The samples are collected near communities located in northern Saskatchewan.

This dataset provides the background radiation dose results from Health Canada’s Canadian Radiological Monitoring Network (CRMN) monitoring sites. More information about the CRMN network can be found on the Health Canada website (see link below).This background radiation data contains both “monitoring” and “transit” dosimeters starting in 2016. The historical background radiation dose data can be found on the Open Data portal. A transit dosimeter is sent along with the monitoring dosimeter to determine if there is a significant dose recorded by the dosimeter while it is in transit to the sampling station. The transit dosimeter is shipped out with a station monitor, and shipped back with the station monitor from the previous quarter. The monitoring dosimeters are deployed over a longer time (around three months) than the transit dosimeters (around 3 weeks). This difference largely explains the lower recorded dose values for the transit dosimeter. The results provided for the monitoring and transit dosimeters are expressed as ambient dose equivalent to a cesium source, in units of millisieverts (mSv). The measured dose rate is reported in mSv/day. The external dose can be attributed almost exclusively to natural radiation (of terrestrial and cosmic origin) with fluctuations based on several factors including location, soil characteristics, and seasonal changes. The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.