These datasets show commercial fisheries catch weight landings of directed fisheries and bycatch from the Scotian Shelf, the Bay of Fundy, and Georges Bank from NAFO Divisions 4VWX and the Canadian portions of 5Y and 5Z. Atlantic Canadian inter-regional maps of four species (Atlantic Halibut, Bluefin Tuna, Redfish and Scallop) are also included from NAFO Divisions 4RST, 3KLMNOP, and 2GHJ. Five-year composite maps (2014–2018) that aggregate catches for each map series are publicly available. The maps aggregate catch weight (kg) per 10 km2 hexagon grid cell for selected species, species groupings and gear types to identify important fishing areas. These maps may be used for decision making in coastal and oceans management, including marine spatial planning, environmental emergency response operations and protocols, Marine Stewardship Council certification processes, marine protected area networks, and ecological risk assessment.These datasets have been filtered to comply with the Government of Canada's privacy policy. Privacy assessments were conducted to identify NAFO unit areas containing data with less than five vessel IDs, licence IDs or fisher IDs. If this threshold was not met, catch weight locations were withheld from these unit areas to protect the identity or activity of individual vessels or companies.Maps were created for the following species, species groupings and gear types:1. Groundfish (all species)2. Groundfish Bottom Trawl3. Groundfish Gillnet4. Groundfish Bottom Longline5. Groundfish (quarterly composites Q1, Q2, Q3, Q4)6. Atlantic Cod7. Atlantic Cod, Haddock and Pollock8. Flatfish9. Atlantic Halibut10. Greenland Halibut (Turbot)11. Hagfish12. Cusk13. Dogfish14. Redfish15. Red Hake16. Silver Hake17. White Hake18. Monkfish19. Sculpin20. Skate21. Wolffish22. Squid23. Herring24. Mackerel25. Large Pelagics26. Bluefin Tuna27. Other Tuna28. Swordfish29. Porbeagle, Mako and Blue Shark30. Snow Crab31. Other Crab32. Scallop33. Scallop (quarterly composites Q1, Q2, Q3, Q4)34. Offshore Clam35. Shrimp36. Offshore Lobster37. Disputed Zone Area 38B Lobster38. Whelk

DFO’s Oceans and Coastal Management Division (OCMD) in the Maritimes Region has updated its fisheries landings maps for 2010–2014. These maps will be used for decision making in coastal and oceans management, including mitigating human use conflicts, informing environmental emergency response operations and protocols, informing Marine Stewardship Council certification processes, planning marine protected area networks, assessing ecological risks, and monitoring compliance and threats in coral and sponge closures and Marine Protected Areas. Fisheries maps were created to identify important fishing areas using aggregate landed weight (kg) per 2 x 2-minute grid cell for selected species/gear types.This dataset has been filtered to comply with the Government of Canada's privacy policy. Privacy assessments were conducted to identify NAFO unit areas containing data with less than five vessel IDs, license IDs and fisher IDs. If this threshold was not met, catch weight locations were withheld from these unit areas to protect the identity or activity of individual vessels or companies.Maps were created for the following species/gear types: 1. Atlantic Halibut2. Bluefin Tuna3. Bottom Longline Groundfish4. Bottom Trawl Groundfish5. Cod6. Cod, Haddock, Pollock7. Cusk8. Dogfish9. Flatfish10. Gillnet Groundfish11. Greenland Halibut12. Groundfish 13. Groundfish (quarterly composites Q1, Q2, Q3, Q4)14. Hagfish15. Herring16. Large Pelagics17. Mackerel18. Monkfish19. Offshore Clam20. Offshore Lobster21. Grey Zone Lobster22. Other Crab23. Other Tuna24. Pollock25. Porbeagle, Mako and Blue Shark26. Red Hake27. Redfish28. Scallop29. Scallop (quarterly composites Q1, Q2, Q3, Q4)30. Sculpin31. Sea Urchin32. Shrimp33. Silver Hake34. Skate35. Snow Crab36. Squid37. Swordfish38. White Hake39. Wolffish

This dataset contains two geotiff layers. The first layer (1) represents the coastwide distribution of Dungeness crab as predicted from a geostatistical model. The model predicts the mean coastwide probability of Dungeness crab detection using trap sampling gear. The second layer (2) represent the uncertainty in those predictions. Detailed descriptions of these data products can be found in Nephin et al. (2023) and the code used to produce them can be found at https://gitlab.com/dfo-msea/dungeness-sdm/.The objectives of this work was to model the habitat of Dungeness crab (_Metacarcinus magister_), a data-limited coastal marine species, to evaluate the efficacy of data integration when making predictions to geographic areas larger than the area covered by any one data source. In British Columbia, Dungeness crab are sampled regionally and sporadically with a variety of sampling gears and survey protocols, making them an ideal case study to investigate whether the integration of disparate surveys can improve habitat predictions. To that aim, we assemble data from dive, trawl, and baited-trap surveys to generate six candidate generalized linear mixed-effect models with spatial random fields. This dataset contains the mean (1) and difference (2) between the Survey-effect and Gear-effect model predictions.

Map of burned area in Canada's forested ecosystems for the 2023 fire session at 30-m spatial resolution mapped from time-series data from Sentinel-2A and -2B, and Landsat-8 and -9 using the Tracking Intra- and Inter-year Change (TIIC) algorithm (Pelletier et al. 2024). It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Fires are grouped into two classes based on detection period: summer fires and fall fires. Summer burned pixels were detected between May 30 and September 17, and fall burned pixels were detected between September 17 and October 25. For summer fires, burned pixels were identified by TIIC as changed and typed as fire. For the fall period, TIIC only detected changes within a 4-km buffer of the NRCan fire perimeters (https://cwfis.cfs.nrcan.gc.ca/datamart). This approach was used to limit commission errors that can occur due to known limitations of mapping with optical data in the fall due to phenology, snow cover, or low sun angles. For the 2023 fire season, the TIIC algorithm detected 12.74 Mha of burned area in Canada's forested ecozones, representing 1.8% of the total forest-dominated ecozone area. Of the 12.74 Mha, 11.57 Mha (90.9%) was burned by summer fires and 1.16 Mha (9.1%) by fall fires (Pelletier et al, 2024).When using this data, please cite as: Pelletier, F., Cardille, J.A., Wulder, M.A., White, J.C., Hermosilla, T., 2024. Revisiting the 2023 wildfire season in Canada. Science of Remote Sensing. 10, 100145. (Pelletier et al. 2024).

This interactive map commemorates Canada’s participation in armed conflicts at home and abroad by highlighting a sample of the many geographical features and places named for those that served our country. These commemorative geographical names help us remember war casualties, soldiers, sailors, airmen and airwomen, military leaders, and civilians recognized or decorated for outstanding acts of bravery and sacrifice in battle. These names also commemorate notable battles in which Canada participated, and Canadian military units, regiments, squadrons, and ships in which Canadians served. Federal, provincial and territorial members of the Geographical Names Board of Canada provided these commemorative names for the development of the map. Many more commemorative place names exist in Canada, and will be added in future releases of this evergreen interactive map. If you would like to contribute names to this project, please contact the Geographical Names Board of Canada Secretariat at Natural Resources Canada.

STE_TEM_ATTRIBUTE_POLYS_SVW contains Terrestrial Ecosystem Mapping (TEM) polygons with key and amalgamated (concatenated) attributes derived from the RISC (Resource Inventory Standards Committee) standard attributes. TEM divides the landscape into units according to a variety of ecological features including climate, physiography, surficial material, bedrock geology, soils and vegetation. TEM methods include manual air photo interpretation supported by selective field checking. This layer is derived from the STE_TEI_ATTRIBUTE_POLYS_SP layer by filtering on the PROJECT_TYPE attribute. Project types include: TEM, NEM, TEMNSS, NEMNSS, TEMPRE, NEMPRE, TEMSEI, TEMSET, TEMTSM, TEMWHR, TEMSDM, TEMPRW, NEMPRW, and TEMSEW. Current version: v11 (published on 2024-10-03) Previous versions: v10 (published on 2023-11-14), v9 (published on 2023-03-01), v8 (published on 2016-09-01)

In 1991, the National Task Force on Health Information cited a number of issues and problems with the health information system. To respond to these issues, the Canadian Institute for Health Information (CIHI), Statistics Canada and Health Canada joined forces to create a Health Information Roadmap. From this mandate, the Canadian Community Health Survey (CCHS) was conceived.The CCHS is a cross-sectional survey that collects information related to health status, health care utilization and health determinants for the Canadian population. The survey is offered in both official languages. It relies upon a large sample of respondents and is designed to provide reliable estimates at the health region level every 2 years.The primary use of the CCHS data is for health surveillance and population health research. The data presented here is by age group and sex, for Canada, provinces, territories and health regions (2017 boundaries).

Caribou habitat management areas identify zones ("tiers") with similar importance to caribou, potential risks and primary strategies for caribou conservation.These Final Caribou Habitat Management Areas (CHMAs) are based on known woodland caribou use and habitat potential mapping; in addition, levels of both human-caused and wildfire disturbances were also taken into consideration. Tier 1 areas were selected because they include high-moderate caribou habitat potential with high levels of observed caribou use and low levels of human-caused disturbance. Tier 2 areas were selected because they include areas of high-moderate woodland caribou habitat potential with observed use and higher levels of wildfire and human-caused disturbance. Tier 3 areas provide general habitat and maintain habitat connectivity between Tier 1 and Tier 2 areas. These areas are not permanent: they will be updated as habitat conditions, land use and caribou populations change over time. Different strategies have been developed for each Tier based on their stated management objectives and relative importance to and known use by caribou, current habitat condition and potential risks. A two page overview of the SK2 Central Woodland Caribou Range Plan and the CHMAs can be viewed here: https://publications.saskatchewan.ca/#/products/122353Find out more about woodland caribou and what the province is doing to manage their habitat and protect their populations: https://www.saskatchewan.ca/business/environmental-protection-and-sustainability/wildlife-and-conservation/wildlife-species-at-risk/woodland-caribou-program

Canada’s NFI survey was designed to provide an unbiased probability sample of Canada’s forests for long-term strategic monitoring purposes. The target population is Canada’s entire non-Arctic land area. A National Terrestrial Monitoring Framework (NTMF) was created by establishing a systematic 4 km by 4 km sampling grid over all of Canada from a random offshore point. Prior to T0, NFI partners determined that the NFI program would be able to affordably achieve its mission by establishing a 2 km by 2 km (400 ha) “photo plot” at every fifth sampling point on the NTMF (i.e. every 20 km), thereby providing a one percent sample of the target population. This sampling intensity was considered sufficient for national reporting and possible to sustain over the long term with anticipated funding.Photo plots were established across Canada during 2000-2006 (T0). There are 26,139 photo plot survey locations on the 20 km by 20 km grid, of which 18,570 lie inside the target population area. For each photo plot, information is collected on land cover, land use, ownership and protection status.NFI photo plot survey data are stratified by “NFI Unit” for standard estimation and reporting purposes. NFI Units were created by the geographic intersection of Canada’s 10 provinces, 3 territories and 12 non-Arctic terrestrial ecozones. Estimates produced for NFI Units are rolled up to produce standard reports for ecozones, jurisdictions (provinces and territories) and Canada. Some NFI Units are too small to produce robust estimates for with the current sampling intensity, so NFI Unit estimates are not publicly reported. Prince Edward Island (PEI) Atlantic Maritime, for example, is PEI’s only NFI Unit and it is small (1% sampling intensity achieved with only 19 photo plots), so the NFI avoids publishing provincial reports. Information consumers are encouraged to use official statistics produced by provincial and territorial governments for the forests in their jurisdictions. Most provinces are large, however, and the current NFI sampling intensity is sufficient for producing robust NFI reports for those jurisdictions. Special estimation reports can be produced using different ecological or administrative strata, such as the Boreal Zone, or the Managed Forest.NFI photo plots are surveyed on a ten-year cycle. During first re-measurement (T1; 2008-2017), survey intensity was reduced to one photo plot every 40 km across northern Canada (Figure 3) because of budget limitations. The T2 survey (2018-2027) is currently underway.

Canada’s NFI survey was designed to provide an unbiased probability sample of Canada’s forests for long-term strategic monitoring purposes. The target population is Canada’s entire non-Arctic land area. A National Terrestrial Monitoring Framework (NTMF) was created by establishing a systematic 4 km by 4 km sampling grid over all of Canada from a random offshore point. Prior to T0, NFI partners determined that the NFI program would be able to affordably achieve its mission by establishing a 2 km by 2 km (400 ha) “photo plot” at every fifth sampling point on the NTMF (i.e. every 20 km), thereby providing a one percent sample of the target population. This sampling intensity was considered sufficient for national reporting and possible to sustain over the long term with anticipated funding.Photo plots were established across Canada during 2000-2006 (T0). There are 26,139 photo plot survey locations on the 20 km by 20 km grid, of which 18,570 lie inside the target population area. For each photo plot, information is collected on land cover, land use, ownership and protection status.NFI photo plot survey data are stratified by “NFI Unit” for standard estimation and reporting purposes. NFI Units were created by the geographic intersection of Canada’s 10 provinces, 3 territories and 12 non-Arctic terrestrial ecozones. Estimates produced for NFI Units are rolled up to produce standard reports for ecozones, jurisdictions (provinces and territories) and Canada. Some NFI Units are too small to produce robust estimates for with the current sampling intensity, so NFI Unit estimates are not publicly reported. Prince Edward Island (PEI) Atlantic Maritime, for example, is PEI’s only NFI Unit and it is small (1% sampling intensity achieved with only 19 photo plots), so the NFI avoids publishing provincial reports. Information consumers are encouraged to use official statistics produced by provincial and territorial governments for the forests in their jurisdictions. Most provinces are large, however, and the current NFI sampling intensity is sufficient for producing robust NFI reports for those jurisdictions. Special estimation reports can be produced using different ecological or administrative strata, such as the Boreal Zone, or the Managed Forest.NFI photo plots are surveyed on a ten-year cycle. During first re-measurement (T1; 2008-2017), survey intensity was reduced to one photo plot every 40 km across northern Canada (Figure 3) because of budget limitations. The T2 survey (2018-2027) is currently underway.