The Homogenized Surface Pressure data consist of monthly, seasonal and annual means of hourly sea level and station pressure (hectopascals) for 626 locations in Canada. Homogenized climate data incorporate adjustments (derived from statistical procedures) to the original station data to account for discontinuities from non-climatic factors, such as instrument changes or station relocation. The time periods of the data vary by location, with the oldest data available from 1953 at some stations to the most recent update in 2014. Data availability over most of the Canadian Arctic is restricted to 1953 to present. The data will continue to be updated every few years (as time permits).

The Homogenized Surface Wind Speed data consist of monthly, seasonal and annual means of hourly wind speed (kilometres per hour) at standard 10 metre level for 156 locations in Canada. Homogenized climate data incorporate adjustments (derived from statistical procedures) to the original station data to account for discontinuities from non-climatic factors, such as instrument changes or station relocation. The time periods of the data vary by location, with the oldest data available from 1953 at some stations to the most recent update in 2014. Data availability over most of the Canadian Arctic is restricted to 1953 to present. The data will continue to be updated every few years (as time permits).

The Common Attribute Schema for Forest Resource Inventories (CASFRI) is a Canadian forest resource inventory data repository. Forest resource inventory datasets in CASFRI are harmonized to a common data model so that data collected by different agencies following different standards can be used together. Participating provincial, territorial and federal government departments and agencies share current and historical map-based forest resource inventory datasets through CASFRI so that their data are available to users who’s areas of interest span multiple jurisdictions. CASFRI was originally developed by academic researchers (Cumming et al., https://doi.org/10.1139/cjfr-2014-0102). This flavour of CASFRI (CASFRIv5) was developed anew in collaboration with academic researchers at the University of Laval to provide a government version of CASFRI that is findable, accessible, interoperable, and reusable. It uses the most up-to-date forest inventory data provided by participating provincial, territorial, and federal government departments and agencies. CASFRIv5 is hosted on the Canadian Council of Forest Ministers’ data portal, the National Forest Information System (http://nfis.org).

The Canadian Hydrospatial Network (CHN) is an analysis-ready geospatial network of features that help enable the modelling of surface water flow in Canada. The six main layers and feature types are: flowlines, waterbodies, catchments, catchment aggregates, work units, and hydro nodes. Where possible the CHN is derived from high resolution source data such as Light Detection and Ranging (LiDAR) derived Digital Elevation Models (DEMs) and aerial imagery, to name a few. If existing provincial or territorial hydrographic networks meet the standards, they are incorporated into the CHN, otherwise automatic extraction methods are used on the high-resolution source data. To provide full network connectivity, if neither of these methods is possible in a region, the NHN is converted into the CHN until higher-resolution source data is available.Additional value-added attributes are included in the CHN to aid modelling, such as stream order and reach slope. The CHN physical model and features are also closely aligned and harmonized with the USGS 3DHP hydrographic network, which aids trans-border modelling. Where possible geonames (i.e. toponyms) are also added.The CHN is produced and disseminated by hydrologically connected geographic areas called work units. Work units can contain just one watershed, several small adjacent watersheds outletting into a large body of water, or be one of many parts of a larger watershed. In all cases, the features of a work unit are hydrologically connected. This is a more natural approach to data delivery, in comparison to data that is split into tiles. A generalized work unit index file is provided in the downloads to help users decide which files to download.For more information on the CHN please visit the project webpage: https://natural-resources.canada.ca/canadian-hydrospatial-network

The mako shark (Isurus oxyrinchus), is a species found in Atlantic Canadian waters which is encountered in commercial and recreational fisheries. Pop-up Satellite Archival Tags (PSAT) from Wildlife Computers were applied to mako sharks from 2011 to 2013 to collect data on depth (pressure), temperature and ambient light level (for position estimation). Deployments were conducted in Canada on commercial vessels, typically in summer and fall from July to October. Two types of tag models were deployed: Mk10 (N=28), and MiniPAT (N=9) and 28 of 37 tags reported (one female shark was recaptured). The mako sharks tagged ranged in size from 80 cm to 229 cm Fork Length (curved); 13 were female, 17 were male, and 7 were unknown sex. Time at liberty ranged from 0 – 185 days and 6 tags remained on for the programmed duration. Raw data transmitted from the PSAT’s after release was processed through Wildlife Computers software (GPE3) to get summary files, assuming a maximum swimming speed of 2m/s, NOAA OI SST V2 High Resolution data set for SST reference and ETOPO1-Bedrock dataset for bathymetry reference. The maximum likelihood position estimates are available in .csv and .kmz format and depth and temperature profiles are also in .csv format. Other tag outputs as well as metadata from the deployments can be obtained upon request from: warren.joyce@dfo-mpo.gc.ca or heather.bowlby@dfo-mpo.gc.ca.

**ATTENTION! The files in this dataset are designed for streaming, not downloading. For the best experience, please follow the instructions available in the resources.**In replacement of the former Canadian Digital Elevation Model (CDEM) that is no longer supported, the Medium Resolution Digital Elevation Model (MRDEM) product is a multi-source product that integrates elevation data from the Copernicus DEM** acquired during the TanDEM-X Mission (AIRBUS, 2022), and the High Resolution Digital Elevation Model data derived from airborne lidar. This product provides a complete, 30 meters resolution, nationwide coverage for Canada. It includes a Digital Terrain Model (DTM), a Digital Surface Model (DSM) and other derived products. The spatial coverage extends into the USA, where needed, to provide coverage for cross-border watersheds in support of hydrological studies and applications. The MRDEM-30-DSM is partially based on the GLO-30 version of the Copernicus DEM** (hereafter named GLO-30). Since elevation values from the GLO-30 are referenced to the EGM2008 geoid model, they were transformed to the Canadian Height Reference System of 2013 (CGVD2013), using the CGG2013 geoid model. Where available, the MRDEM-30-DSM integrates surface data from the lidar-derived HRDEM mosaic, resampled from 1 m to 30 m. The process to generate the MRDEM-30-DTM is more complex. Where available, the HRDEM Mosaic derived from lidar was used since it already provides reliable terrain elevation values. The HRDEM Mosaic data used was resampled from 1m to 30m. Elsewhere, the processing workflow combines a forest removal model and a settlement removal model that is applied to the GLO-30 values in order to estimate the terrain elevation values. Both datasets are projected to Canada Atlas Lambert NAD83 (CSRS) (EPSG:3979).The MRDEM is referenced to the CGVD2013 which is the reference standard for orthometric heights across Canada.The product Medium Resolution Digital Elevation Model (MRDEM) is part of the CanElevation Series created in support to the National Elevation Data Strategy implemented by NRCan.** This product was in part produced using Copernicus WorldDEM-30 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014- 2018 provided under COPERNICUS by the European Union and ESA; all rights reserved.The organisations in charge of the Copernicus program by law or by delegation do not incur any liability for any use of the Copernicus WorldDEM-30.

The porbeagle shark (Lamna nasus), is a species found in Atlantic Canadian waters which is encountered in commercial and recreational fisheries. Pop-up Satellite Archival Tags (PSAT) from Wildlife Computers were applied to porbeagle sharks from 2005 to 2021 to collect data on depth (pressure), temperature and ambient light level (for position estimation). Deployments were conducted in Canada and the Faroe Islands on commercial, recreational and scientific charters, typically in summer and fall but some over winter when the porbeagle commercial fishery was active in Canada. A variety of tag models were deployed: PAT 4 (n=1), Mk10 (N=41), and MiniPAT (N=15) and 51 of 57 tags reported. One individual shark was recaptured and the physical tag was returned. The porbeagle sharks tagged ranged in size from 76 cm to 249 cm Fork Length (curved); 42 were female, 15 were male. Time at liberty ranged from 4 – 356 days and 14 tags remained on for the programmed duration. Raw data transmitted from the PSAT’s after release was processed through Wildlife Computers software (GPE3) to get summary files, assuming a maximum swimming speed of 2m/s, NOAA OI SST V2 High Resolution data set for SST reference and ETOPO1-Bedrock dataset for bathymetry reference. The maximum likelihood position estimates are available in .csv and .kmz format and depth and temperature profiles are also in .csv format. Other tag outputs as well as metadata from the deployments can be obtained upon request from: warren.joyce@dfo-mpo.gc.ca or heather.bowlby@dfo-mpo.gc.ca.

CMIST is a peer-reviewed screening-level risk assessment tool for marine invasive species (Drolet et al. 2016). It is a short questionnaire that follows the invasion process from arrival to impact and is designed so an informed assessor can evaluate one species in an assessment area in approximately one day using easily accessible information from internet databases, primary literature, and grey literature. Species can be those with an invasion history in an area or those that are candidates for future invasions.CMIST is score-based and incorporates both likelihood and impact of invasion as well as uncertainty. Questions are general to make CMIST broadly applicable to different taxa, different assessment areas, and different project goals. To date, CMIST has been tested with molluscs, tunicates, crustaceans, and polychaetes introduced or at risk of introduction to three Canadian marine ecoregions (DFO 2009). CMIST has also been successfully applied to non-indigenous freshwater fish in British Columbia with adapted guidelines (T. Therriault, pers. comm.). Upon completion, CMIST produces a risk score adjusted for the assessor’s uncertainty which, combined with information collected during the assessment, can be used to assist in management decisions. For example, in 2015, CMIST assessments were used to identify high risk invaders in three Canadian marine ecoregions (DFO 2016).

The Canadian Aquatic Biomonitoring Network (CABIN) is an aquatic biomonitoring program for assessing the health of fresh water ecosystems in Canada. Benthic macroinvertebrates are collected at a site location and their counts are used as an indicator of the health of that water body. CABIN is based on the network of networks approach that promotes inter-agency collaboration and data-sharing to achieve consistent and comparable reporting on fresh water quality and aquatic ecosystem conditions in Canada. The program is maintained by Environment and Climate Change Canada (ECCC) to support the collection, assessment, reporting and distribution of biological monitoring information. A set of nationally standardized CABIN protocols are used for field collection, laboratory work, and analysis of biological monitoring data. A training program is available to certify participants in the standard protocols. There are two types of sites in the CABIN database (reference and test). Reference sites represent habitats that are closest to “natural” before any human impact. The data from reference sites are used to create reference models that CABIN partners use to evaluate their test sites in an approach known as the Reference Condition Approach (RCA). Using the RCA models, CABIN partners match their test sites to groups of reference sites on similar habitats and compare the observed macroinvertebrate communities. The extent of the differences between the test site communities and the reference site communities allows CABIN partners to estimate the severity of the impacts at those locations. CABIN samples have been collected since 1987 and are organized in the database by study (partner project). The data is delineated by the 11 major drainage areas (MDA) found in Canada and each one has a corresponding study, habitat and benthic invertebrate data file. Links to auxiliary water quality data are provided when available. Visits may be conducted at the same location over time with repeat site visits being identified by identical study name / site code with different dates. All data collected by the federal government is available on Open Data and more partners are adding their data continually. The csv files are updated monthly. Contact the CABIN study authority to request permission to access non open data.

As part of the Musquash Marine Protected Area (MPA) Monitoring Plan, this project was implemented to establish a baseline for infaunal biodiversity for this area. Data collection began in 2010 and contributed monitoring information for productivity, biodiversity, and habitat indicators within the Musquash Harbour. A 1500 cubic centimetre ponar benthic grab was deployed at 30 random stations distributed over three strata (channel, intertidal and subtidal). Samples were to be collected up to three times per year to account for seasonality and annual variation. Once collected the benthic samples were analyzed for changes in grain size, carbon content (Loss on ignition), species abundance/diversity and biomass.Cite this data as: Cooper, J.A., and Blanchard, M. Musquash Benthic Infauna. Published in September 2023. Coastal Ecosystem Science Division, Fisheries and Oceans Canada, St. Andrews, NB.For additional information please see:Cooper, A., Abbott, M., Allard, K., Chang,, B., Courtenay, S., Doherty, P., Greenlaw, M., Ipsen, E., Koropatnick, T., Law, B., Losier, R., Martin, J., Methven, D., and Page, F. 2014. Musquash Estuary Marine Protected Area (MPA): Data Assessment. DFO Can. Sci. Advis. Sec. Res. Doc. 2014/001. v + 57 p.Cooper, J.A., Jones, O. and Blanchard, M. 2023. Review of Baseline Monitoring within the Musquash Estuary Marine Protected Area. DFO Can. Sci. Advis. Sec. Res. Doc. 2023/028. viii + 56 p.Oceans and Coastal Management Division (OCMD). 2015. Musquash Estuary Marine Protected Area Ecosystem Monitoring Plan (2014-2019). Can. Manuscr. Rep. Fish Aquat. Sci. 3077: v+17 pp.DFO. 2022. 2021 Review of Musquash Marine Protected Area Monitoring. DFO Can. Sci. Advis. Sec. Sci. Advis. Rep. 2022/016.