Home /Search
Search datasets
We have found 1,459 datasets for the keyword " topographic model". You can continue exploring the search results in the list below.
Datasets: 103,438
Contributors: 42
Results
1,459 Datasets, Page 1 of 146
High Resolution Digital Elevation Model Mosaic (HRDEM Mosaic) - CanElevation Series
The High Resolution Digital Elevation Model Mosaic provides a unique and continuous representation of the high resolution elevation data available across the country. The High Resolution Digital Elevation Model (HRDEM) product used is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The mosaic is available for both the Digital Terrain Model (DTM) and the Digital Surface Model (DSM) from web mapping services. It is part of the CanElevation Series created to support the National Elevation Data Strategy implemented by NRCan. This strategy aims to increase Canada's coverage of high-resolution elevation data and increase the accessibility of the products.Unlike the HRDEM product in the same series, which is distributed by acquisition project without integration between projects, the mosaic is created to provide a single, continuous representation of strategy data. The most recent datasets for a given territory are used to generate the mosaic. This mosaic is disseminated through the Data Cube Platform, implemented by NRCan using geospatial big data management technologies. These technologies enable the rapid and efficient visualization of high-resolution geospatial data and allow for the rapid generation of dynamically derived products. The mosaic is available from Web Map Services (WMS), Web Coverage Services (WCS) and SpatioTemporal Asset Catalog (STAC) collections. Accessible data includes the Digital Terrain Model (DTM), the Digital Surface Model (DSM) and derived products such as shaded relief and slope.The mosaic is referenced to the Canadian Height Reference System 2013 (CGVD2013) which is the reference standard for orthometric heights across Canada.Source data for HRDEM datasets used to create the mosaic is acquired through multiple projects with different partners.Collaboration is a key factor to the success of the National Elevation Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.
Canada west coast topo-bathymetric digital elevation model
The joint Natural Resources Canada/Department of Fisheries and Oceans Marine Spatial Planning Program requires the highest resolution marine based bathymetric elevation data and adjacent land based topographic elevation data that are available. This digital elevation model of Canada's west coast compiles the best data available from multiple government agencies to create a regional model gridded at 10 meter spacing. The transitions between the marine and terrestrial areas are seamless creating a continuous surface of elevations for scientific research and mapping.
Level curves
Level curves with an equidistance of 1 m derived from a lidar survey conducted in 2024.attributes:ID - Unique IDSubtype - Master (1) or secondary (2) level curve SCORE - Elevation value (m) The High Resolution Digital Elevation Model (m) product The High Resolution Digital Elevation Model (HRDM) product is available on the Open Government website.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**
Digital terrain models on a scale of 1/20,000
Digital terrain models offer a representation of the relief south of the 52nd parallel, in the form of an elevation matrix. This matrix makes it possible to visualize the territory in perspective and to perform three-dimensional spatial analyses, using appropriate software.A module specialized in three-dimensional data processing, such as 3D Analyst or Spatial Analyst, is required to visualize the digital altitude model in three dimensions.This digital altitude model (10-meter pixel matrix) is obtained by processing altimeter data (level curves and elevation points) from ** [topographic databases on a scale of 1/20,000] (https://www.donneesquebec.ca/recherche/fr/dataset/cartes-topographiques-a-l-echelle-de-1-20-000) **.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**
BC Macro-Reaches (50,000)
Stream Macro-Reaches delineated through interpretation of Topographic features from the 1:50,000 scale Canadian National Topographic Series of Maps.
Nova Scotia Topographic Database - Digital Terrain Model (DTM)
Part of the Nova Scotia Topographic Database (NSTDB), DTM is a vector data set of spot elevations collected from aerial photography. An elevation point is collected at ground level approximately every eighty meters in an irregular grid pattern. These spot elevations, or mass points, can be used to create profiles of the ground or Digital Elevation Models (DEM). Data download also available via GeoNova: https://nsgi.novascotia.ca/WSF_DDS/DDS.svc/DownloadFile?tkey=fhrTtdnDvfytwLz6&id=37 Map Service view also available via GeoNova: https://nsgiwa.novascotia.ca/arcgis/rest/services/BASE/BASE_NSTDB_10k_DTM_UT83/MapServer?f=jsapi
Canadian Digital Surface Model, 2000
This is a legacy product that is no longer supported. It may not meet current government standards.The Canadian Digital Surface Model (CDSM) is part of Natural Resources Canada's altimetry system designed to better meet the users' needs for elevation data and products. The 0.75-second (~20 m) CDSM consists of a derived product from the original 1-second (30 m) Shuttle Radar Topographic Mission (SRTM) digital surface model (DSM). In these data, the elevations are captured at the top of buildings, trees, structures, and other objects rather than at ground level.A CDSM mosaic can be obtained for a pre-defined or user-defined extent. The coverage and resolution of a mosaic varies according to the extent of the requested area.Derived products such as slope, shaded relief and colour shaded relief maps can also be generated on demand by using the Geospatial-Data Extraction tool. Data can then be saved in many formats.The pre-packaged GeoTiff datasets are based on the National Topographic System of Canada (NTS) at the 1:50 000 scale; the NTS index file is available in the Resources section in many formats.
Ontario Vector Topographic Data Cache
The Ontario Vector Topographic Data Cache is a collection of topographic data, that has been preprocessed for fast, seamless display at predefined scales. The topographic data includes constructed and natural features that make up Ontario’s landscape. The cache provides limited data from areas outside Ontario’s boundaries, such as the United States and adjacent provinces and territories. __Technical information__ Two versions of the Topographic Data Cache are available: 1. The traditional raster version is available for a variety of GIS applications and is updated annually. 2. The vector version is suitable for online web map applications as well as modern GIS software and is updated twice a year. Contributing data layers may have different maintenance and update cycles. Some cache layers have been processed in a way that makes it easier for them to be displayed in a mapping product. Other layers are unchanged from the authoritative data. The cartographic symbology used in the data cache is intentionally muted to allow users to showcase their data. The Ontario Vector Topographic Data Cache is created from many source datasets, which are described in the Ontario Vector Topographic Data Cache user guide. If you are interested in getting this authoritative data, you can download it from the [Ontario GeoHub](http://www.ontario.ca/geohub). For instructions on getting a copy of either version of the cache for use in mapping applications, visit the [Ontario GeoHub](http://www.ontario.ca/geohub).
Mule Deer Winter Range Topographic Buffers - Cariboo Region
Topographic buffers within mule deer winter range in the Cariboo Region.
Slope class (BDTQ)
__The link: *Access the data directory* is available in the section*Dataset Description Sheets; Additional Information*__.**Slope classes** express the slope of the terrain in a relatively homogeneous area with a minimum area of 0.5 ha. They are generated from a numerical model that groups terrain slopes into six classes:+ 0-3% zero + Low by 4-8% + 9-15% soft + Moderate by 16-30% + 31-40% strong + Steep by 41% or moreThese data cover almost all of Quebec south of the 52nd parallel. This map is presented in two groups: grouping at the provincial level and grouping at the scale of 1/250,000. Each grouping represents an assembly of sheets produced on a scale of 1/20,000.The datasets were originally produced in 2005 and then updated in 2006. In 2010, they were enhanced with slope information for the northernmost part. No updates have been made since then.__For more information, please refer to the document: [Products presenting the concept of slope] (https://diffusion.mffp.gouv.qc.ca/Diffusion/DonneeGratuite/Foret/DONNEES_FOR_ECO_SUD/Classes_pente/01-Documentation/Produits_presentant_la_notion_de_pente.pdf)____ ⚠️ Notes: __ The numerical terrain model is prepared from the level curves and altitude points that come from the topographic map at a scale of 1/20,000 and 1/50,000 from the Quebec Topographic Database (BDTQ). This geographic database was produced in 2010 and has never been updated.__ 🕰️ Former names:__ Numerical slope classes, Slope class**This third party metadata element was translated using an automated translation tool (Amazon Translate).**
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and topics that matter to you.
Please send us your feedback