Temporary Protection Orders (TPOs) are ministerial orders that can be implemented to curtail water users during times of water scarcity to protect streamflow availability fish populations and the aquatic ecosystem. TPOs were implemented under Section 9 of the Fish Protection Act prior to 2016, but are now implemented under Section 86, 87 and 88 of the Water Sustainability Act. This dataset is a compilation of data hosted on TPOs to date across British Columbia and is maintained by the Watershed Stewardship and Security Branch within the Ministry of Water, Lands and Resource Stewardship. The purpose of the dataset is to communicate to water users when and where TPOs are/were in effect at the watershed scale. For specific details on which water users are affected by a TPO, please refer to the official Ministerial Order document referenced in the dataset.

The Ontario Dam Inventory (ODI) is an inventory of medium and large dams throughout Ontario. It uses a point-based system (x, y location) to identify each dam location. The ODI does not contain: * small dams * small water control structures * beaver dams * water crossings * road embankments * locks * falls * rapids * culverts Each dam location has an identifier that can be used to link to other dam information databases.

An Element Occurrence (EO) is an area of land and/or water in which a species or ecological community is, or was, present. An Element is either a species (or subspecies taxa) or an ecological community, the Occurrence is the documented location. The EO concept is part of NatureServe methodology. This methodology is used throughout the NatureServe network. EOs are created based on the Element Occurrence Data Standard and are a derived product developed from submitted observations. An EO should have practical conservation value for the Element as evidenced by potential continued (or historical) presence and/or regular recurrence at a given location. For Species Elements, the EO often corresponds with the local population, but when appropriate may be a portion of a population (e.g., for long distance dispersers) or may be a group of nearby populations (e.g., metapopulation). For Ecological Community Elements, the EO may represent a stand or patch of a natural community, or a cluster of stands or patches of a natural community. This dataset contains Non-sensitive EOs. Non-Sensitive EOs are locations (i.e. occurrences) of species or communities that are rare (or of conservation concern for some other reason) and for which there are no restrictions regarding public access to location data (beyond agreeing to the Terms and Conditions detailed below). This data updates on a daily basis.

A Safety Feature is one of a number of various appliances/appurtenances that have been installed or constructed either alongside or as an integral part of the road infrastructure to reduce the severity or potential of accidents. It is a Point feature

A feature is a representation of a real world object, such as a lake, stream, dam or rapid. There are three hydrographic feature classes:  points, lines and polys.   All may impede or be hazardous to waterflow and/or navigation on a watercourse or waterbody. This data shows natural and manmade poly features.  Examples include: * break walls * dams * rapids * shipwrecks [Technical Bulletin: Data migrated to new Ontario Hydro Network (OHN) - Hydrographic Feature Data Classes (PDF)](http://geo2.scholarsportal.info/proxy.html?http:__maps.scholarsportal.info/files/PDFS/public/OGDE/OHN/TB-OHN-PostMigration_101112.pdf)

Point features showing the location of intakes and/or wellheads for drinking water systems. A drinking water system is any domestic system servicing anything other than a single-family dwelling, as defined in the Drinking Water Protection Act. These locations are updated as more information is received and is therefore continually being updated and may or may not match the corresponding Point of Diversion locations available through the Water Rights dataset and application. This is one of three Drinking Water Sources datasets (along with the DWS - Source Areas polygons dataset, and DWS - Protection Zones polygons dataset). Note: the polygons all have unique polygon IDs used to relate them to these points.

An Element Occurrence (EO) is an area of land and/or water in which a species or ecological community is, or was, present. An Element is either a species (or subspecies taxa) or an ecological community, the Occurrence is the documented location. The EO concept is part of NatureServe methodology. This methodology is used throughout the NatureServe network. EOs are created based on the Element Occurrence Data Standard and are a derived product developed from submitted observations. An EO should have practical conservation value for the Element as evidenced by potential continued (or historical) presence and/or regular recurrence at a given location. For Species Elements, the EO often corresponds with the local population, but when appropriate may be a portion of a population (e.g., for long distance dispersers) or may be a group of nearby populations (e.g., metapopulation). For Ecological Community Elements, the EO may represent a stand or patch of a natural community, or a cluster of stands or patches of a natural community. This dataset contains Sensitive EOs. Sensitive EOs are occurrences of species that are rare (or of conservation concern) and in these cases the precise location details cannot be distributed without due cause. In most cases these locations are not freely available because the species are legally listed (for example, under Schedule 1 of the Species at Risk Act) or are of particular concern to the Alberta government, thus Sensitive EO data in this layer is hazed (generalized) to the Alberta Township System Township (ATS) polygons (v4.1). This data updates on a daily basis.

Terrain Stability Mapping (TSM) Detailed Polygons (STE_TER_STABILITY_POLYS_SVW) contains TSM polygons with key and amalgamated (concatenated) attributes derived from the Resource Inventory Standards Committee (RISC) standard attributes. This layer is derived from the [STE_TEI_ATTRIBUTE_POLYS_SP](https://catalogue.data.gov.bc.ca/dataset/f2cd2cc3-5f58-481c-bf3c-64934acb6fad) layer by filtering on the PROJECT_TYPE attribute. Project types include: TEMSET, TEMTSM, TSM, TSMREC, TSMDET, TBW, and TBS. TSM uses air photo interpretation and select field checking to divides the landscape into units using the Terrain Classification System for British Columbia and stability criteria. Polygon attributes include (but are not limited to) surficial material, surface expression, geomorphological processes, drainage class, slope range and stability class. TSM methods include manual air photo interpretation and setting stability criteria supported by selective field checking. TSM Detailed Polygon layer should be used in conjunction with [TER Project Boundaries](https://catalogue.data.gov.bc.ca/dataset/ad2f6d1e-cb53-4308-9263-e8deb731b996) which contain boundaries (study areas) and attributes describing each project (project level metadata), plus links to the locations of other data associated with the project (e.g., reports, polygon datasets, plotfiles, legends). TSM inventory polygons with full RISC attributes can be accessed through the [Terrestrial Ecosystem Information (TEI) Data Distribution Packages](https://catalogue.data.gov.bc.ca/dataset/8fd15e4e-e7b1-4566-81d1-1ff8947bfd46). **Current version**: v12 (2026-06-22)

Hydro Features is composed of the network of Canadian surface waters. Hydro Features entities are: Watercourse, Water Linear Flow, Hydro Obstacle (falls, rapids\...), Waterbody (lake, watercourse\...), Permanent Snow and Ice, Water Well, and Spring. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Get data on Lake Ontario tagged Atlantic salmon recaptures. This dataset represents tagged adult Atlantic salmon that were released and then recaptured by anglers. These fish were used as brood stock (breeding) in the Ministry of Natural Resources and Forestry’s fish culture program. All fish were tagged with a streamer tag near the dorsal fin. Each tag has a unique number and a phone number so anglers can call and let the ministry know about their catch. The data includes: * tagging date * recapture date * tag number/colour * location released * location recaptured * days since released * distance travelled