In this dataset, we share maps of annual dominant tree species (also known as leading tree species) from 1984-2022 covering the entirety of Canada's 650 Mha forested ecosystems using Landsat time-series imagery at a 30-m spatial resolution. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Classifications are based on regionally representative Random Forests model using local training samples from Canada's National Forest Inventory (Hermosilla et al., 2024). Descriptive metrics provide information on spectral, geographic, climatic, and topographic characteristics. Initial annual tree species classifications were subjected to a time series post-classification process using the forward-backward Hidden Markov Model to improve the temporal consistency of tree species transitions within the time series. Assessment of the annual species maps using independent validation data resulted in an overall accuracy of 86.1% ± 0.14% (95%-confidence interval). These data allow consistent comparison of trends and rates of change in tree species composition nationally and across regions using a common time frame, spatial resolution, and analytical approach.Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Bater, C.W., Hobart, G.W., 2024. Characterizing long-term tree species dynamics in Canada's forested ecosystems using annual time series remote sensing data. Forest Ecology and Management, 122313. https://doi.org/10.1016/j.foreco.2024.122313 (Hermosilla et al. 2024)

High-resolution map of leading tree species distribution for Canada’s forested ecosystems (2019). Leading tree species map produced from a 2019 Landsat image composite, geographic and climate data, elevation derivatives, and remote sensing derived phenology following the framework described in Hermosilla et al. (2022). Regional classification models were generated based on Canada’s National Forest Inventory using a 150x150 km tiling system. The leading tree species are defined by representing the most voted tree species from the Random Forests classification models (i.e. the class with the highest class membership probability).The data represents leading tree species of Canada's forested ecosystems in 2019. An image compositing window of August 1 ± 30 days was used to generate the best-available-pixel (BAP) image composites utilized as source data for the classification.The science and methods developed to generate the information outcomes shown here, that track and characterize the history of Canada’s forests, were led by Canadian Forest Service of Natural Resources Canada, developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS), partnered with the University of British Columbia, augmented by processing capacity from Digital Research Alliance of Canada.For an overview on the data, image processing, and methods applied, as well as information on independent accuracy assessment of the data, see Hermosilla et al. (2022) https://doi.org/10.1016/j.rse.2022.113276When using this data, please cite as: Hermosilla, T., Bastyr, A., Coops, N.C., White, J.C., Wulder, M.A., 2022. Mapping the presence and distribution of tree species in Canada’s forested ecosystems. Remote Sensing of Environment 282, 113276.

Canada's National Forest Inventory (NFI) sampling program is designed to support reporting on forests at the national scale. On the other hand, continuous maps of forest attributes are required to support strategic analyses of regional policy and management issues. We have therefore produced maps covering 4.03 × 106 km2 of inventoried forest area for the 2001 base year using standardised observations from the NFI photo plots (PP) as reference data. We used the k nearest neighbours (kNN) method with 26 geospatial data layers including MODIS spectral data and climatic and topographic variables to produce maps of 127 forest attributes at a 250 × 250 m resolution. The stand-level attributes include land cover, structure, and tree species relative abundance. In this article, we report only on total live aboveground tree biomass, with all other attributes covered in the supplementary data (http://nrcresearchpress.com/doi/suppl/10.1139/cjfr-2013-0401). In general, deviations in predicted pixel-level values from those in a PP validation set are greater in mountainous regions and in areas with either low biomass or sparse PP sampling. Predicted pixel-level values are overestimated at small observed values and underestimated at large ones. Accuracy measures are improved through the spatial aggregation of pixels to 1 km2 and beyond. Overall, these new products provide unique baseline information for strategic-level analyses of forests (https://nfi.nfis.org)Collection:- **[Canada's National Forest Inventory (NFI) 2006](https://open.canada.ca/data/en/dataset/e2fadaeb-3106-4111-9d1c-f9791d83fbf4)**

The raster maps depict a suite of forest attributes in 2001* and 2011 at 250 m by 250 m spatial resolution. The maps were produced using the k nearest neighbours method applied to MODIS imagery and trained from National Forest Inventory photo plot data. For detailed information about map production methods please refer to Beaudoin et al. (2018) "Tracking forest attributes across Canada between 2001 and 2011 using the k nearest neighbours mapping approach applied to MODIS imagery." Canadian Journal of Forest Research 48, 85-93. https://cfs.nrcan.gc.ca/publications?id=38979 The map datasets may be downloaded from https://nfi.nfis.org/downloads/nfi_knn2011.zip or https://open.canada.ca/data/en/dataset/ec9e2659-1c29-4ddb-87a2-6aced147a990 * Note: the forest composition (leading tree genus) map depicts forest attributes in 2001.How can this data be used?The resolution and accuracy of these map products are best suited for strategic-level forest reporting and informing policy and decision making at regional to national scales. As these maps also offer a coherent set of quantitative values for a large suite of forest attributes, they can be used as baseline information for modelling and in calculations such as merchantable forest volume or percentage of tree species. It is also possible to overlay these maps with other maps produced on the same pixel grid to make assessments of disturbance impacts, such as fire and harvests.

The spatial representation for a Tree Farm Licence Schedule A, which is private land or timber owned by the Tree Farm licence holder that is part of the Established Tree Farm Licence. These private lands can be inside or outside the main body of the Tree Farm Licence For further information on Tree Farm Licenses please visit this website: https://www2.gov.bc.ca/gov/content?id=A93E6DFD8C164AD19CD17880450289A3

The spatial representation for a Tree Farm Licence Deletion, which is forest land within the Tree Farm Licence that is being removed from the Tree Farm Licence Schedule 'A' or 'B' For further information on Tree Farm Licenses please visit this website: https://www2.gov.bc.ca/gov/content?id=A93E6DFD8C164AD19CD17880450289A3

The spatial representation for a Tree Farm Licence Addition, which is forest land designated by the Ministry to be added to an established Tree Farm Licence Schedule A or B For further information on Tree Farm Licenses please visit this website: https://www2.gov.bc.ca/gov/content?id=A93E6DFD8C164AD19CD17880450289A3

The raster maps depict a suite of forest attributes in 2001* and 2011 at 250 m by 250 m spatial resolution. The maps were produced using the k nearest neighbours method applied to MODIS imagery and trained from National Forest Inventory photo plot data. For detailed information about map production methods please refer to Beaudoin et al. (2018) "Tracking forest attributes across Canada between 2001 and 2011 using the k nearest neighbours mapping approach applied to MODIS imagery." Canadian Journal of Forest Research 48, 85-93. https://cfs.nrcan.gc.ca/publications?id=38979 The map datasets may be downloaded from https://nfi.nfis.org/downloads/nfi_knn2011.zip or https://open.canada.ca/data/en/dataset/ec9e2659-1c29-4ddb-87a2-6aced147a990 * Note: the forest composition (leading tree genus) map depicts forest attributes in 2001.How can this data be used?The resolution and accuracy of these map products are best suited for strategic-level forest reporting and informing policy and decision making at regional to national scales. As these maps also offer a coherent set of quantitative values for a large suite of forest attributes, they can be used as baseline information for modelling and in calculations such as merchantable forest volume or percentage of tree species. It is also possible to overlay these maps with other maps produced on the same pixel grid to make assessments of disturbance impacts, such as fire and harvests.

The raster maps depict a suite of forest attributes in 2001* and 2011 at 250 m by 250 m spatial resolution. The maps were produced using the k nearest neighbours method applied to MODIS imagery and trained from National Forest Inventory photo plot data. For detailed information about map production methods please refer to Beaudoin et al. (2018) "Tracking forest attributes across Canada between 2001 and 2011 using the k nearest neighbours mapping approach applied to MODIS imagery." Canadian Journal of Forest Research 48, 85-93. https://cfs.nrcan.gc.ca/publications?id=38979 The map datasets may be downloaded from https://nfi.nfis.org/downloads/nfi_knn2011.zip or https://open.canada.ca/data/en/dataset/ec9e2659-1c29-4ddb-87a2-6aced147a990 * Note: the forest composition (leading tree genus) map depicts forest attributes in 2001.How can this data be used?The resolution and accuracy of these map products are best suited for strategic-level forest reporting and informing policy and decision making at regional to national scales. As these maps also offer a coherent set of quantitative values for a large suite of forest attributes, they can be used as baseline information for modelling and in calculations such as merchantable forest volume or percentage of tree species. It is also possible to overlay these maps with other maps produced on the same pixel grid to make assessments of disturbance impacts, such as fire and harvests.

This view reflects what is in the Tree Farm License Agreement. Once an agreement is signed additions and deletions and changes occur that are not reflected in this layer. If you would like to see the current boundary please use the FADM - Tree Farm License Current View (TFL). Further information on Tree Farm Licenses please visit this website: https://www2.gov.bc.ca/gov/content?id=A93E6DFD8C164AD19CD17880450289A3 The spatial representation for a Tree Farm License, which is an agreement entered into under Part 3, Division 5 of the Forest Act which grants the rights to harvest timber. A tree farm licence has a term of 25 years and requires a management plan providing for the establishment, management, and harvesting of timber in a described area (Crown and private land) on a sustained or perpetual yield basis