The Roads database includes an inventory of road assets (roadways, blocks, intersections, sidewalks, curbs) with a spatial representation and various attached information.Sidewalk-type road assets represent sidewalks and curbs juxtaposed with carriageways located in the public domain and that are part of the local or arterial road network. Sidewalks and curbs are represented by polygons differentiated by category and type. Among the information associated with a sidewalk-type object is the date of construction, the date of survey, the type of sidewalk and curb, the materials of the sidewalk, the border and the developed strip, the presence of trees, the presence of a projection, the presence of a ledge, the presence of a bicycle lane, the use, etc.Island-type road assets represent malls located in the public domain and which are juxtaposed to the local or arterial road network. The islands are represented by polygons that are differentiated by their configuration.Among the information associated with an island-type object is the date of construction, the date of survey, the materials of the block and the border, the presence of trees, the type of island, etc.Data is also available in separate sets on the portal to support several uses:- [Road asset (complete database)] (/city-of-montreal/road-active)- [Roadway and intersection] (/city-of-montreal/voirie-causee-intersection)- [Off-road zone] (/city-of-montreal/voirie-zone) __Warnings__- The data released on road assets are those in the possession of the City's geomatics team and are not necessarily up to date throughout the territory.- The data released on road assets is provided for information purposes only and should not be used for the purposes of designing or carrying out works or for the location of assets.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This dataset contains observations of species occurrences from seafloor imagery collected by the remotely operated underwater vehicle (ROV) during the 2012 Expedition to Cobb Seamount. The ROV operated by Fisheries and Oceans Canada was a customized Deep Ocean Engineering Phantom HD2+2 which collected photographic images from 12 transects ranging from 35 m to 211 m in depth.

PURPOSE:This Archer fiord data is associated with a larger program ArcticCORE, which was created to fulfill knowledge gaps and develop long term protection in the extremely remote Tuvaijuittuq region. The main objectives of this expedition were to improve our comprehension of the key drivers for productive capacity, diversity and ecosystem structure in areas connected to Baffin Bay and Tuvaijuittuq, including Archer fiord.DESCRIPTION:ArcticCORE is a 5-year broader program aiming to characterize Tuvaijuittuq’s unique ecosystem and its influence and connectivity with the adjacent ecosystems to inform sustainable management and conservation initiatives in Tuvaijuittuq and the eastern Arctic. In an Arctic Ocean with rapidly declining sea ice, Tuvaijuittuq area retains the oldest and thickest sea ice, and can act as a refuge for ice-dependent species. This program aims to characterize the Arctic marine ecosystem and establish baseline measurements for future comparisons in the region. From 2023, water collection was carried out at four stations throughout Archer Fiord and analyzed for primary productivity, chlorophyll a, phytoplankton flow cytometry and phytoplankton taxonomy down to the lowest identifiable level. These data will contribute to a better understanding of the key drivers for productive capacity, diversity and ecosystem structure in Archer fiord. Characterization of these upstream areas are relevant for an ecosystem-based approach to fisheries management in Baffin Bay, a priority for DFO and an intrinsic part of mandated activities, as they influence the ecosystem and fisheries resources downstream.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

Research surveys targeting Icelandic scallops (Chlamys islandica) have been conducted by Fisheries and Oceans Canada (DFO) at one- or two-year intervals in the Mingan Archipelago (since 1990 in fishing area 16E and since 2004 in fishing area 16F). The main objective of this survey is to assess the status of Icelandic scallop stocks. The study area is situated around the Mingan Archipelago, where scallop beds are sampled at depths ranging from approximately 8 to 136 m, but typically around 40 to 60 m. Sampling is conducted along transects at fixed stations in the study area. Each station is sampled using a lined Digby scallop dredge (20 mm mesh size), towed for roughly 150 m across the seabed.This publication includes three files: the file biometriePetoncle_16, which contains detailed biometric data (species, size, weights and sex) from 2001 to 2025; the file taillePetoncle_16, which provides the size of the individuals sampled from 2010 to 2024; and the file traitPetoncle_16 which contains the abundances and densities per tow from 2004 to 2024. Data on abundances and densities per tow from 2001-2003 is available upon request.This dataset is updated every one to two years as data becomes available. A cleaning of aberrant data has been carried out. However, there is missing data in various columns of the dataset – use the data with caution. If you have any questions please contact DFO.DataManagementSAISB-GestionDonneesDAISS.MPO@dfo-mpo.gc.ca or the author. For certain time periods, associated species are identified and semi-quantitatively counted directly on the sorting table, and the results are presented in the following publication: - https://open.canada.ca/data/en/dataset/7d29bdb1-7e39-43ee-9fb1-bbf33cc9c9b9

Multi-model ensembles of snow depth based on projections from twenty-eight Coupled Model Intercomparison Project Phase 5 (CMIP5) global climate models are available for 1900-2100. Specifically, the 5th, 25th, 50th, 75th and 95th percentiles of the monthly, seasonal and annual ensembles of snow depth (m) are available for the historical time period, 1900-2005, and for emission scenarios, RCP2.6, RCP4.5 and RCP8.5, for 2006-2100. Note: Projections among climate models can vary because of differences in their underlying representation of earth system processes. Thus, the use of a multi-model ensemble approach has been demonstrated in recent scientific literature to likely provide better projected climate change information.

The data layer (.shp) presented is the result of an unsupervised classification method for classifying seafloor habitat on German Bank (off South West Nova Scotia, Canada). This method involves separating environmental variables derived from multibeam bathymetry (Slope, Curvature) and backscatter (principal components: Q1, Q2, and Q3) into spatial units (i.e. pixels) and classifying the acoustically separated units into 5 habitat classes (Reef, Glacial Till, Silt, Silt with Bedforms, and Sand with Bedforms) using in situ data (imagery). Benthoscape classes (synonymous to landscape classifications in terrestrial ecology) describe the geomorphology and biology of the seafloor and are derived from elements of the seafloor that were acoustically distinguishable.Unsupervised classifications (acoustic classifications) optimized at 15 classes using Idrisi CLUSTER method (pixel based)Number representing the benthoscape classes (CLASS) derived from in situ imagery and video (See Brown et al., 2012, Figure 3, Table 1).Benthoscape classes (See Brown et al., 2012, Figure 3).Reference:Brown, C. J., Sameoto, J. A., & Smith, S. J. (2012). Multiple methods, maps, and management applications: Purpose made seafloor maps in support of ocean management. Journal of Sea Research, 72, 1–13. https://doi.org/10.1016/j.seares.2012.04.009Cite this data as: Brown, C. J., Sameoto, J. A., & Smith, S. J. Data of: Benthoscape Map of German Bank. Published: February 2021. Population Ecology Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/b7f81d4a-2cb6-4393-b35b-e536ec63e834

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

Since 1985, research surveys targeting scallops—primarily the sea scallop (Placopecten magellanicus) and, to a lesser extent, the Icelandic scallop (Chlamys islandica)—have been conducted by Fisheries and Oceans Canada (DFO) at one- or two-year intervals around the Magdalen Islands (fishing area 20A). The main objective of this survey is to assess the status of sea scallop stocks. The study area is situated south of the Magdalen Islands, where scallop beds are typically sampled at depths ranging from approximately 25 to 35 m. Sampling stations are randomly selected from a predetermined fixed grid, with sampling conducted along transects at these randomly assigned locations within the study area. Each station is sampled using a lined Digby scallop dredge (20 mm mesh size), towed for roughly 500 m across the seabed.This publication includes three files: the file biometriePetoncle_20, which contains detailed biometric data (species, size, weights and sex) from 1998 to 2024; the file taillePetoncle_20, which provides the size of the individuals sampled from 2009 to 2024; and the file traitPetoncle_20 which contains the abundances and densities per tow from 2009 to 2024. Data on abundances and densities per tow from 1998-2008 is available upon request.This dataset is updated every one to two years as data becomes available. A cleaning of aberrant data has been carried out. However, there is missing data in various columns of the dataset – use the data with caution. If you have any questions please contact DFO.DataManagementSAISB-GestionDonneesDAISS.MPO@dfo-mpo.gc.ca or the author. For certain time periods, associated species are identified and semi-quantitatively counted directly on the sorting table, and the results are presented in the following publications: - https://open.canada.ca/data/en/dataset/6529a4b0-f863-4568-ac71-1fa26cf68679- https://open.canada.ca/data/en/dataset/71732ad5-5c70-4dbf-916d-a94e1380c53b 

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.