Province-wide spatial view showing the most downstream point of a stream, as determined by Water Allocation staff, to have a current or potential water quantity/quality concern. Note: This layer has replaced the older Water Allocation Restrictions view spatial layer. This data is updated nightly.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Water quantity in Canadian rivers indicator provides a national summary of the annual water quantity status in rivers across Canada from 2009 to 2023 and by monitoring station in 2023. The indicator also offers trends that provide an assessment of whether there have been significant observed changes over time in water quantity, of very-high and very-low flows, at monitoring stations across Canada for a 50-year period from 1974 to 2023. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

A station is a site on a river or lake where water quantity (water level and flow) are collected and recorded.

In the hydrogeological unit, quantity of water that replenishes groundwater beneath the water table, expressed in mm/yr. Recharge is usually calculated using hydrology balance, integrating information from precipitation, hydrology data, drainage, soil properties, evapotranspiration, etc. The result is a raster dataset in which each cell has a given value for the recharge of the aquifer. It can be calculate using HELP software, developed by the US EPA. The methods used to create the dataset are described in the metadata associated with the dataset. The dataset represent a raster in which each cell has a mean value describing the global annual recharge of the hydrogeological unit.

Boundaries (polygons) of areas designated as community watershed by government - that are all or part of the drainage area that is upslope of the lowest point from which water is diverted for human consumption by a licensed waterworks, if satisfied that, to protect the water that is diverted for human consumption, the area requires special management that is not otherwise provided for under this regulation or other enactment: to conserve the quality, quantity and timing of water flow; or to prevent cumulative hydrological effects that would have a material adverse effect on the water . Supercedes the '(DEPRECATED) BC Community Watersheds' dataset BC_COMMUNITY_WATERSHEDS

This product provides the ratio of surface freshwater intake to water yield for August 2013, with the exception of drainage regions 7, 8, 16, 17 and 18, which use the ratio of August intake to the long-term minimum monthly water yield. Surface freshwater intake aggregates data from the Survey of Drinking Water Plants, 2013 and the Industrial Water Use Survey, 2013 with estimates of agricultural water use for 2013 based on the Agricultural Water Use Survey and the Alberta Irrigation Information report. Data for water use by the oil and gas industry and households not supplied by a public water provider are also excluded.

This product provides the median of monthly maximum turbidity values (in nephelometric turbidity units) for drinking water facilities by drainage region. Turbidity refers to the relative cloudiness of water, caused by suspended particles in water. The Survey of Drinking Water Plants collected this monthly maximum turbidity data for surface water sources from facilities reporting turbidity data for at least 10 months in 2013. These facilities served 24 million people and produced 4,091 million cubic metres of potable water from surface water sources in 2013. Source water turbidity was monitored continuously at 42% of these drinking water plants in 2013, daily at 34% of plants and less frequently at the remaining plants.

Water sampling data includes several thematic layers. 1) Water samples authorized by the MELCCFP: This thematic layer shows the location of water sampling sites authorized in Quebec under section 22 of the Environment Quality Act (chapter Q-2) and their associated volume (liter per day). The database includes active authorizations to take water since the Water Withdrawal and Protection Regulation (RPEP) came into force on August 14, 2014.2) Water uses by municipality: The data from the game “Water Uses by Municipality” is an estimate of the volumes of water collected annually on the territory of Quebec municipalities, based on water samples or declared water uses available in various government databases.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Under the Regulation Respecting the Mandatory Reporting of Certain Contaminant Emissions into the Atmosphere (RDOECA), the Ministry of the Environment, the Fight against Climate Change, Wildlife and Parks collects data on greenhouse gases (GHGs) emitted by Quebec businesses in particular. Thus, any person or municipality operating an establishment that emits GHGs into the atmosphere in a quantity equal to or greater than 10,000 metric tons in CO2 equivalent (t eq. CO2) is required to report its emissions no later than June 1 of each year.The data is presented in separate files:* Total biogenic and CO2 emissions per establishment;* Emissions per establishment and per greenhouse gas and per establishment.Total emissions files include the total quantity of GHGs, the total quantity of GHGs excluding CO2 from biomass, the quantity of CO2 from the combustion of biomass, and the quantity of CO2 from other uses of biomass (for example fermentation).The emission files by establishment and by greenhouse gas include the quantity emitted of each of the GHGs in metric tons and t eq. CO2. Note that CO2 emissions include those from biomass.The data presented in this dataset includes emissions from mandatory and voluntary reporting.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Existing flood protection works (dikes and bank protection) crest alignment in British Columbia. Updated from available Provincial dike crest survey project data from 2019/2020. If 2019/2020 dike survey project data is unavailable, linework based on previous data from 2004 and prior. May include periodic updates depending on data provided by Diking Authorities and other sources. See Data Source under selected linework for details. For more information on dike management and safety, please see: https://www2.gov.bc.ca/gov/content/environment/air-land-water/water/drought-flooding-dikes-dams/integrated-flood-hazard-management/dike-management For contact names regarding regional diking issues, please see: https://www2.gov.bc.ca/assets/gov/environment/air-land-water/water/integrated-flood-hazard-mgmt/dike_safety_program_contact_list.pdf