Point features showing the locations of groundwater wells which have lithology recorded. Each record in the dataset represents a lithology interval. Because each water well often has multiple lithology layers recorded, there will often be multiple points overlapped at each well location. For the locations of all water wells in BC (without lithology), please see: https://catalogue.data.gov.bc.ca/dataset/e4731a85-ffca-4112-8caf-cb0a96905778 > NOTE: When choosing to download this GIS dataset below, there can be errors when trying to download the entire province. The large file size is a problem for the default file format (shapefile). > If you need to download the entire province, please choose a different file format (e.g. ESRI File Geodatabase). > If you need to download in shapefile format, please use an area of interest (AOI).

Point features showing the locations of groundwater wells with pumping test information and/or aquifer parameter data. Some wells may have more than one pumping test record. Further context regarding the pumping tests and analysis are provided with the well records in GWELLS (https://apps.nrs.gov.bc.ca/gwells/).

Point features showing the location of intakes and/or wellheads for drinking water systems. A drinking water system is any domestic system servicing anything other than a single-family dwelling, as defined in the Drinking Water Protection Act. These locations are updated as more information is received and is therefore continually being updated and may or may not match the corresponding Point of Diversion locations available through the Water Rights dataset and application. This is one of three Drinking Water Sources datasets (along with the DWS - Source Areas polygons dataset, and DWS - Protection Zones polygons dataset). Note: the polygons all have unique polygon IDs used to relate them to these points.

Hydraulic properties characterize a hydrogeological unit. The hydraulic properties considered for this dataset are the transmissivity, the hydraulic conductivity, the storage coefficient, the specific storage coefficient and the porosity. Hydraulic properties are estimated by performing aquifer tests (pumping tests, slug tests). The hydraulic tests and their duration are managed in this dataset. The methods used to create the dataset are described in the metadata associated with the dataset. The dataset exhibits a general description of hydraulic properties of the hydrogeological unit, including hydraulic test, total test duration, method and date. It includes numbers and/or ranges describing the aquifer tests results. Note that an alternate raster representation could be used in complement to the discrete point-based representation.

This theme includes the drainage areas of various watercourse monitoring stations (physicochemical and bacteriological, benthic organisms, diatoms, pesticides, etc.) carried out by the Ministry of the Environment, the Fight against Climate Change, Wildlife and Parks (MELCCFP) as well as lake catchments (MELCCFP) as well as lake catchments including the majority of lakes in the Voluntary Lake Monitoring Network (RSVL).The drainage area and the watershed represent the territory whose water flows to the sampling station or to the outlet of the lake. Boundaries are generated using a geographic information system (GIS) from topographic maps, numerical elevation models and flow models, and watershed boundaries produced by the Main Directorate of Water Expertise (DPEH).The drainage area and watershed are used to calculate the area drained upstream of the sampling station or lake, to characterize the drained territory (for example, to determine land use), and to meet specific mapping needs. The linked tables also provide compilations of land use according to three classifications to contextualize the various monitoring carried out at the stations. Note that the use of land outside Quebec, drainage areas and transboundary watersheds is not calculated and that the percentages in each category correspond to the Quebec area only.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This dataset displays aquifers with water allocation notations on them. This dataset is updated daily.

This data keeps the Ministry of Agriculture, Food and Agribusiness' records of modified or newly constructed drainage systems current. Constructed drains include ditches, buried tile systems, or natural watercourses that have been modified to improve drainage.

PURPOSE:To record hourly water temperatures throughout the Margaree watershed.DESCRIPTION:The Department of Fisheries and Oceans (DFO) has been deploying water temperature monitoring equipment since spring 1993 in the Margaree River watershed. Coverage has changed throughout the time series and there is little documentation regarding equipment used. In recent years data have been collected using VEMCOs. USE LIMITATION:To ensure scientific integrity and appropriate use of the data, we would encourage you to contact the data custodian.

Groundwater flow is the movement of water in an aquifer or hydrogeological unit. The dataset shows groundwater flow rate and direction in the hydrogeological unit. Groundwater flow is establish from piezometric surface map. The method used to create the dataset is described in the metadata associated with the dataset. The dataset represents a description of the flow, including rate in m/d, direction, date and source. Typically, the data provided will not be in the form of a shapefile with linked properties but in the form of an image that sketches the groundwater flow. The image could also represent a cross section of the hydrogeologic units showing the regional trends of the groundwater flow.

The Waterbodies dataset is comprised of area features: lakes, intermittent waterbodies, islands, and rivers wide enough to be represented as an area feature (e.g. St. Lawrence River, Mackenzie River). In a few exceptional cases, islands had to be represented by "holes" in the polygons in the Waterbodies dataset. Some area features have been subdivided and several types of virtual linear features serve to separate them. Features in this dataset are linked (by an attribute) to their corresponding flow line in the Drainage Network Skeleton. Therefore the Waterbodies dataset may be used in conjunction with the Drainage Network Skeleton for analytical applications. The Islands dataset is comprised of area and linear features: islands within inland waters and the waterbodies and single line rivers within these islands. Oceanic islands are not included as they are part of the coastline component of the Drainage Network Skeleton dataset. The Islands dataset exists to complete the cartographic representation of Canadian hydrology. The Islands dataset is not logically connected with the Drainage Network Skeleton, and can not be used for analytical applications. It should be noted that flow lines of the Drainage Network Skeleton do not take into account of the existence of islands and therefore do not necessarily flow around them. In a few exceptional cases, islands had to be represented by "holes" in the polygons in the Waterbodies dataset. Some islands themselves contain waterbodies and rivers, not significant for network analysis. However, in order to support a complete cartographic representation such waterbodies and rivers have been added to the Islands dataset. The National Scale Frameworks Hydrology data consists of area, linear and point geospatial and attribute data for Canada's hydrology at a national scale. It provides a representation of Canada's surface water features, and data completeness reflects the content of the source, the original Vector Map level 0 (VMAP0) revision 4 hydrographic layers, except where revision editing has been performed. Key value-added characteristics include river flow direction, connectivity and the tagging of geographical name keys to selected rivers, lakes and islands included in the Concise Gazetteer of Canada.The Atlas Frameworks are a set of integrated base map layers which form part of a larger National Scale Frameworks data collection. These data have been compiled at a scale of 1:1 000 000 with the primary goal being to indicate correct relative positioning with other framework layers rather than absolute positional accuracy.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)