The dataset contains data for placer watersheds locations. The dataset covers 18 watersheds within the Yukon Territory. The following watersheds form the principle boundaries of the dataset: Big Creek, Big Salmon River, Forty Mile River Indian River, Klondike River, Mayo River McQuesten River, Nisutlin River, Nordenskiold River Pelly River, Sixty Mile River, Southern Lakes (Yukon) Stewart River, White River\*, Yukon River North Yukon River South, Alsek River, Liard River \*Note - A small portion of the headwaters of the Tanana River (Yukon) watershed is associated within the boundaries of the White River watershed .Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Belly River Structure

The purpose of this dataset is to identify the location of river valley connections.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

The purpose of this feature layer is to provide the 2009 overland flooding boundary in the Red River Valley.This dataset shows the extent of peak overland flooding in the Red River Valley in 20 09 . Data is based on RADARSAT – 1 satellite imagery. During processing, the raw data set was resampled to 12.5 meter pixel resolution, then classified using PCI Geomatica software which is a specialized software designed to manipulate space born imagery. The final output depicting the flooding boundary is available as a TIFF or Shapefile. Launched in November 1995, RADARSAT-1 was a Canadian-led project which provided useful information to both commercial and scientific users in such fields as disaster management, agriculture, cartography, hydrology, forestry, oceanography, ice studies and coastal monitoring. Equipped with a powerful synthetic aperture radar (SAR) instrument, it acquired images of the Earth day or night, in all weather and through cloud cover, smoke and haze. As of March 2013, the satellite was declared non-operational and is no longer collecting data. Many applications were developed to take advantage of RADARSAT-1 capacity for detecting the presence of water. These included monitoring flooding and the build-up of river ice, and mapping the melting of snow-covered areas. When used for flood monitoring, RADARSAT-1 data helped assess the impact of flooding, predicted the extent and duration of floodwaters, analyzed the environmental impact of water diversion projects, and developed flood mitigation measures. Fields Included:FID : Internal feature numberNAME : Flooded area nameAREA_SQKM : Size of flooded area

The purpose of this feature layer is to provide the 1997 overland flooding boundary in the Red River Valley.This dataset shows the extent of peak overland flooding in the Red River Valley in 1997 . Data is based on RADARSAT – 1 satellite imagery. During processing, the raw data set was resampled to 12.5 meter pixel resolution, then classified using PCI Geomatica software which is a specialized software designed to manipulate space born imagery. The final output depicting the flooding boundary is available as a TIFF or Shapefile. Launched in November 1995, RADARSAT-1 was a Canadian-led project which provided useful information to both commercial and scientific users in such fields as disaster management, agriculture, cartography, hydrology, forestry, oceanography, ice studies and coastal monitoring. Equipped with a powerful synthetic aperture radar (SAR) instrument, it acquired images of the Earth day or night, in all weather and through cloud cover, smoke and haze. As of March 2013, the satellite was declared non-operational and is no longer collecting data. Many applications were developed to take advantage of RADARSAT-1 capacity for detecting the presence of water. These included monitoring flooding and the build-up of river ice, and mapping the melting of snow-covered areas. When used for flood monitoring, RADARSAT-1 data helped assess the impact of flooding, predicted the extent and duration of floodwaters, analyzed the environmental impact of water diversion projects, and developed flood mitigation measures. Fields Included:FID : Internal feature numberNAME : Flooded area nameAREA_SQKM : Size of flooded area

The dataset includes subsurface stratigraphic picks of the Milk River 'shoulder' in the Alberta Plains (Townships 1 to 73, Ranges 1W4 to 2W6) made from wireline geophysical well logs. The Milk River 'shoulder' is an informal term often used to refer to a distinctive 'shoulder' (deflection) on resistivity, sonic, density, and porosity logs. The Milk River 'shoulder' corresponds to the top of the Milk River Formation in southernmost Alberta, where it represents juxtaposition between paralic deposits of the underlying Deadhorse Coulee Member of the Milk River Formation and overlying marine shale of the Pakowki Formation. It is characterized by a leftward deflection (decreasing resistivity) upwards across the contact, forming the distinctive 'shoulder signature'. To the north, the Milk River 'shoulder' represents the boundary between the Alderson Member (lower Lea Park Formation) and the upper Lea Park Formation (Pakowki equivalent). In these areas, silty sands and mudstones of the Alderson Member are overlain by shales of the upper Lea Park Formation. Well data were screened to detect errors resulting from deviated wells, as well as incorrect ground and kelly bushing elevation data. We used statistical methods to identify local and regional statistical outliers, which we examined individually.

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

These data sets provide information pertaining to epifauna and substrate estimates collected at dockside perimeters of floating docks located in Burrard Inlet and Fraser River Delta, British Columbia, between August and November, 2020. Data sets were compiled and formatted by Meagan Mak.Epifauna diversity was examined along surface perimeters of floating docks in Burrard Inlet and Fraser River Delta in southwestern British Columbia. Diversity estimates were obtained from video surveys collected over three depth-intervals: 1) Splash zone (SZ): depth-interval directly 15-cm above air-water interface; 2) Subsurface zone (SSZ): depth-interval (0-21 cm) below air-water interface; and 3) Deep-water zone (DZ): depth-interval below the SSZ (21-41 cm). Dock substrate consisted of combinations of wood, concrete, tires, plastic-floats, and metal, while epifauna and epiflora included anemones, tunicates, sponge, tube-worms, sea stars, bivalves, crabs, nudibranchs, urchins, barnacles, limpets, chitons, isopods, macroalgae and seagrass. Mussels ranged between 46% and 95% coverage across docks (median: 93%), while frequency of occurrence ranged between 85% and 100% (median: 99%), providing a biological-based substrate for other epifauna. The splash-zone consisted of outcropped mussels, encroached macroalgae from the waterline, and invertebrates above the waterline (limpets, chiton). If present, Ulva spp. typically formed a consistent narrow band (2-3 cm) above the waterline across all docks. Benthic (pipefish, sculpin) and pelagic (perch) fish were associated with epifaunal coverage and pelagic (open-water medium) settings. The Coast Guard Sea Island dock may experience episodic low-salinity intrusions supporting marine organisms at this site (ochre star, sculpin, limpet).

This dataset contains digital data files on transects flown and reported in Harwood, L.A. and P. Norton (1996). Aerial survey data from the southeast Beaufort Sea, Mackenzie River estuary and west. Amundsen Gulf, July 1992. Canadian Data Report of Fisheries and Aquatic Sciences No. 964