This dataset shows the boundaries of the province's six fire management zones that existed prior to 2014 in which most forest fires received the same type of response. These management zones were based on: * common forest and forest fire management objectives * land use * density of values at risk * fire load * forest ecology The 2014 Wildland Fire Management Strategy moved from a zone-based approach to one where each wildland fire is assessed and receives an appropriate response according to the circumstances and condition of the fire.

Fire districts are administrative areas where wildland fire resources are allocated and deployed. They fall within one of six larger fire regions.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Fire regions are the largest management unit where wildland fire resources are allocated and deployed. They can be further subdivided into fire districts.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Hazardous forest types for wildland fire means forest types assessed as being associated with the risk of high to extreme wildland fire. This data is intended to help inform where further assessment is required and is to be used in conjunction with guidance from the Ministry of Natural Resources and Forestry .

A National Forest Fire Behaviour Prediction (FBP) Fuel Type (FT) layer, representing fuel types as described in the Canadian Forest Fire Danger Rating System (CFFDRS) Canada-wide. This data is developed through the Spatialized Canadian National Forest Inventory (SCANFI) dataset, specifically the updated SCANFI version 2.0. The Fuel Type layer is produced at variable resolution to best meet the needs of users: 30m (default) and 100m (ideal for fire growth modelling).The purpose of this dataset is to characterize Canadian forests into Fuel Types for use in various applications, including wildland fire management, research, fuel management, and more. This layer is primarily developed to support national scale applications and uses but can be utilized for localized landbases and adapted as required.This data represents the most up-to-date national product and is updated annually prior to the start of the fire season to incorporate burned area and additional data from the previous year. This data will be updated annually and published online by April 30th of each year.Note: In this product Slash fuel types (S-1, S-2, and S-3) are not represented. Conifer Plantation (C-6) is not represented. Raster Grid Value 13 represents vegetated fuels without an effective match to an existing FBP Fuel Type under this ruleset. Grid Value 11 (corresponding to D-1 Leafless Aspen) is assumed to represent true Deciduous fuels as described in the FBP system.

Fire perimeters for this year's forest fires in Ontario. Fire perimeters are illustrations only and may not be exact in relation to actual physical locations. The Ontario Ministry of Natural Resources does not capture perimeters for every fire. Fire perimeters are not captured in real time; each capture depends on available resources and weather conditions and may be several days old. During fire season, perimeter data is updated every 24 hours as improved information becomes available; therefore, reported fire size may fluctuate from day to day. The Ontario Ministry of Natural Resources shall not be liable in any way for the use of, or reliance upon this information. The [Forest Fire Info Map](https://www.lioapplications.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM&locale=en-CA) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

A Fire Disturbance Area represents the mapped exterior perimeter of a forest fire. Mapping is derived from a variety of sources, such as GPS points and digitized paper maps. Prior to 1998, only fires greater than 200 hectares were mapped. Since 1998, fires greater than 40 hectares have been mapped. If adequate mapping exists for fires less than 40 hectares in size, they will be included in this data class. The [Forest Fire Info Map](https://www.lioapplications.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

## Get data on areas where outdoor fires are not permitted. This dataset shows areas where outdoor fires are restricted in accordance with the [Forest Fires Prevention Act](https://www.ontario.ca/laws/statute/90f24). There are two reasons why a restricted fire zone is in effect: * outdoor conditions are extremely dry * the number of fires occurring has stretched firefighting resources to capacity A restricted fire zone is a temporary measure for extreme situations and is lifted as soon as conditions permit. The [Forest Fire Info Map](https://www.lioapplications.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

This dataset shows the locations of ignition points for forest fires less than 40 hectares in size. Fires that grow larger than 40 hectares are mapped in the [Fire Disturbance Area](https://data.ontario.ca/dataset/fire-disturbance-area-firedstb) dataset. The [Forest Fire Info Map](https://www.gisapplication.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM&locale=en-US) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

Wildfire perimeters for the current fire season, including both active and inactive fires, supplied from various sources. The data is refreshed from operational systems every 15 min. These perimeters are rolled over to Historical Fire Polygons on April 1 of each year Wildfire data may not reflect the most current fire situation, and therefore should only be used for reference purposes. Wildfire data is refreshed when practicable and individual fire update frequency will vary. The information is intended for general purposes only and should not be relied on as accurate because fires are dynamic and circumstances may change quickly.