In 2021, the Canada Coast Guard (CCG) and Fisheries and Oceans Canada updated its administrative boundaries following the creation a new Arctic region. There are now 4 administrative regions in CCG (Western, Arctic, Central and Atlantic). DFO and Coast Guard Arctic Regions developed these regions in partnership with the people they serve; this important decision will lead to stronger programs and services to better meet the unique needs of our Arctic communities. DFO and CCG operations and research cover Canada's land and waters to the international boundaries (EEZ) and are in no way limited to the boundaries drawn in the map.

In 2021, the Canada Coast Guard (CCG) and Fisheries and Oceans Canada (DFO) updated its administrative boundaries following the creation a new Arctic region.There are now 7 administrative regions in DFO (Pacific, Arctic, Ontario and Prairie, Quebec, Gulf, Maritimes, Newfoundland and Labrador). DFO and Coast Guard Arctic Regions developed these regions in partnership with the people they serve; this important decision will lead to stronger programs and services to better meet the unique needs of our Arctic communities.DFO and CCG operations and research cover Canada's land and waters to the international boundaries (EEZ) and are in no way limited to the boundaries drawn in the map.

"Vegetation Zones of Canada: a Biogeoclimatic Perspective" maps Canadian geography in relation to gradients of regional climate, as expressed by potential vegetation on zonal sites. Compared to previous similar national-scale products, "Vegetation Zones of Canada" benefits from the work of provincial and territorial ecological classification programs over the last 30+ years, incorporating this regional knowledge of ecologically significant climatic gradients into a harmonized national map. This new map, reflecting vegetation and soils adapted to climates prior to approximately 1960, can serve as a broad-scale (approximately 1:5 M to 1:10 M) geospatial reference for monitoring and modeling effects of climate changes on Canadian ecosystems. "Vegetation Zones of Canada: a Biogeoclimatic Perspective" employs a two-level hierarchical legend. Level 1 vegetation zones reflect the global-scale latitudinal gradient of annual net radiation, as well as the effects of high elevation and west to east climatic and biogeographic variation across Canada. Within the level 1 vegetation zones, level 2 zones distinguish finer scale variation in zonal vegetation, especially in response to elevational and arctic climatic gradients, climate-related floristics and physiognomic diversity in the Great Plains, and maritime climatic influences on the east and west coasts. Thirty-three level 2 vegetation zones are recognized: High Arctic Sparse Tundra Mid-Arctic Dwarf Shrub Tundra Low Arctic Shrub Tundra Subarctic Alpine Tundra Western Boreal Alpine Tundra Cordilleran Alpine Tundra Pacific Alpine Tundra Eastern Alpine Tundra Subarctic Woodland-Tundra Northern Boreal Woodland Northwestern Boreal Forest West-Central Boreal Forest Eastern Boreal Forest Atlantic Maritime Heathland Pacific Maritime Rainforest Pacific Dry Forest Pacific Montane Forest Cordilleran Subboreal Forest Cordilleran Montane Forest Cordilleran Rainforest Cordilleran Dry Forest Eastern Temperate Mixed Forest Eastern Temperate Deciduous Forest Acadian Temperate Forest Rocky Mountains Foothills Parkland Great Plains Parkland Intermontane Shrub-Steppe Rocky Mountains Foothills Fescue Grassland Great Plains Fescue Grassland Great Plains Mixedgrass Grassland Central Tallgrass Grassland Cypress Hills GlaciersPlease cite this dataset as: Baldwin, K.; Allen, L.; Basquill, S.; Chapman, K.; Downing, D.; Flynn, N.; MacKenzie, W.; Major, M.; Meades, W.; Meidinger, D.; Morneau, C.; Saucier, J-P.; Thorpe, J.; Uhlig, P. 2019. Vegetation Zones of Canada: a Biogeoclimatic Perspective. [Map] Scale 1:5,000,000. Natural Resources Canada, Canadian Forest Service. Great Lake Forestry Center, Sault Ste. Marie, ON, Canada.

River ice roughness products from the current calendar year in selected Canadian regions that have been designated for observation, monitored by Natural Resources Canada using satellite imagery for emergency response. Coverage is not comprehensive nationwide. In order to mitigate ice jam induced floods risks, Natural Resources Canada emergency geomatics service (EGS) may be activated by Canada’s emergency management authorities. As new satellite imagery becomes available, NRCan will produce river ice roughness maps and update the dataset in near real time (4 hours). This item contains record of the river ice roughness products generated in the current year. For the complete archive, please refer to the [River Ice in Canada - Archive](https://open.canada.ca/data/en/dataset/5e6b40bf-299f-4e05-87c8-d10b9c8210f9) entry.The river ice product is generated and validated on a best effort basis. Various factors may affect the quality of the river ice roughness maps. Those factors include but are not limited to: environmental condition at the time of acquisition, image resolution or the limitations of the methodology used. To view a specific product, filter the data by date (UTC Date) and area of interest (AOI). Links to download specific EGS product are available in the Resources section.Disclaimer:Emergency response authorities are the primary users of these satellite-derived river ice roughness map products. These products are generated to provide analysis and emergency response situational awareness and to facilitate decision-making during major flood events. The river ice roughness products are generated rapidly and limited time is available for editing and validation. The river ice roughness products reflect the river ice surface roughness conditions at the date/time of acquisition. While efforts are made to produce high quality products, near-real time products may contain errors due to the limited time available for validation and the limited availability of ground truthing data.Limitation of Liability:Accordingly, the information contained on this website is provided on an “as is” basis and Natural Resources Canada makes no representations or warranties respecting the information, either expressed or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a particular purpose. Natural Resources Canada does not assume any liability in respect of any damage or loss based on the use of this website. In no event shall Natural Resources Canada be liable in any way for any direct, indirect, special, incidental, consequential, or other damages based on any use of this website or any other website to which this site is linked, including, without limitation, any lost profits or revenue or business interruption.Parent Collection:- **[River Ice State in Canada - Cartographic Product Collection](https://open.canada.ca/data/en/dataset/d1fcb44f-5f86-4957-bdb4-e6fd1aa69283)**

The hydrographic features of the CanVec series include watercourses, water linear flow segments, hydrographic obstacles (falls, rapids, etc.), waterbodies (lakes, watercourses, etc.), permanent snow and ice features, water wells and springs.The Hydrographic features theme provides quality vector geospatial data (current, accurate, and consistent) of Canadian hydrographic phenomena. It aims to offer a geometric description and a set of basic attributes on hydrographic features that comply with international geomatics standards, seamlessly across Canada.The CanVec multiscale series is available as prepackaged downloadable files and by user-defined extent via a Geospatial data extraction tool.Related Products (Open Maps Links):[Topographic Data of Canada - CanVec Series](https://open.canada.ca/data/en/dataset/8ba2aa2a-7bb9-4448-b4d7-f164409fe056)

Feature layer of the Manitoba provincial boundary.A feature layer of Manitoba's provincial boundaries:Manitoba/Ontario boundary, Manitoba/Saskatchewan boundary, Manitoba/Nunavut boundary, International boundary. Excluding the International Boundary, the graphical data was computed from original boundary survey measurements published in respective official boundary commission reports using least squares adjustment software "Manor". The adjustments were constrained to known NAD83 [nmip94 adj.] federal/provincial boundary marker positions. For the International Boundary, the graphics were created by converting the official published NAD27 marker positions for the boundary into NAD83 using datum conversion software NTv2 and interconnecting the plotted marker positions with straight lines using CARIS map software. The purpose is to provide end users with a digital map of Manitoba's boundaries.  This data layer is suitable for most medium and small scale digital map applications as well as GIS georeferencing in general. This Manitoba provincial boundary was originally published on January 12, 2004. It was uploaded to Manitoba Maps as a feature layer on December 15, 2016. Use Constraints: The Hudson Bay shoreline for this product was taken from 1:500,000 scale digital mapping and is intended for generalized small scale mapping of this portion of the provincial boundary. Estimated accuracy if plus or minus 125m. Fields Included: FID: Sequential unique whole numbers that are automatically generated, AREA: GIS area in square-metres calculated in the NAD83 Universal Transverse Mercator Zone 14 coordinate system, PERIMETER: GIS perimeter in metres calculated in the NAD83 Universal Transverse Mercator Zone 14 coordinate system, NAME: province name

The dataset was developed to provide geographic guide to better understand the boundaries of the Industrial Heartland - Designated Industrial Zone (IH-DIZ). The IH-DIZ industrial zoned land extends into 5 different municipalities, including: Approx. 533 km2 within the City of Fort Saskatchewan and the Counties of Lamont, Strathcona and Sturgeon. Approx. 49 km2 in the City of Edmonton, which is the industrial area known as the Edmonton Energy and Technology Park.

'Province' and 'territory' refer to the major political units of Canada. From a statistical point of view, province and territory are basic areas for which data are tabulated. Canada is divided into 10 provinces and 3 territories. Statistics Canada uses standard codes and abbreviations to represent provinces and territories. The two-digit code that uniquely identifies each province/territory is based on the Standard Geographical Classification (SGC). The code is assigned from east to west. The first digit represents the geographical region of Canada in which the province/territory is located and the second digit denotes one of the 10 provinces and 3 territories.

Boundaries for reporting cases of COVID-19 in Saskatchewan. Areas, zones and subzones show the different geographies available; these boundaries are based on statistics Canada source geometry when possible.On August 4th 2020, the province announced it would change the method of reporting COVID-19 cases, moving from six regions based on former Regional Health Authorities to thirteen zones based on Saskatchewan Health Authority geographies. The COVID-19 Zones are made by aggregating the COVID-19 Subzones, which are based on the SHA Health Networks or aggregations thereof. The COVID-19 Areas are an aggregation of the COVID-19 Zones.  Areas, zones and subzones show the different geographies available; these boundaries are based on statistics Canada source geometry when possible.

Location and identification of the 40 integrated water management zones by watershed in southern Quebec.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**