Footprints for all imagery in the Government of Yukon [Aerial Imagery Service](https://open.yukon.ca/data/yukon-aerial-imagery-most-recent).Distributedfrom [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps). Discover more digital mapdata and interactive maps from Yukon's digital map data collection.For moreinformation: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca).

Footprints for all imagery in the G overnment of Yukon High Resolution Satellite I magery S ervice.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The raster maps depict a suite of forest attributes in 2001* and 2011 at 250 m by 250 m spatial resolution. The maps were produced using the k nearest neighbours method applied to MODIS imagery and trained from National Forest Inventory photo plot data. For detailed information about map production methods please refer to Beaudoin et al. (2018) "Tracking forest attributes across Canada between 2001 and 2011 using the k nearest neighbours mapping approach applied to MODIS imagery." Canadian Journal of Forest Research 48, 85-93. https://cfs.nrcan.gc.ca/publications?id=38979 The map datasets may be downloaded from https://nfi.nfis.org/downloads/nfi_knn2011.zip or https://open.canada.ca/data/en/dataset/ec9e2659-1c29-4ddb-87a2-6aced147a990 * Note: the forest composition (leading tree genus) map depicts forest attributes in 2001.How can this data be used?The resolution and accuracy of these map products are best suited for strategic-level forest reporting and informing policy and decision making at regional to national scales. As these maps also offer a coherent set of quantitative values for a large suite of forest attributes, they can be used as baseline information for modelling and in calculations such as merchantable forest volume or percentage of tree species. It is also possible to overlay these maps with other maps produced on the same pixel grid to make assessments of disturbance impacts, such as fire and harvests.

The marks left in the seabed by the commercial anchoring process can be seen as linear features in high-resolution multibeam bathymetry data. These features have been digitized to polylines for individual marks and polygons for anchor scour zones for British Columbia's (BC) commercial anchorages. They are made available via the Federal Geospatial Platform (FGP) for use in a Geographical Information System (GIS). This feature dataset is complete for published BC commercial anchorages and the multibeam bathymetry data available in 2021. It does not represent features produced since the collection of each multibeam bathymetry survey nor any features infilled since. The data are intended to be used for scientific research to better understand the cumulative impacts to the seabed from commercial anchoring at a 1:5000 scale or greater.

The raster maps depict a suite of forest attributes in 2001* and 2011 at 250 m by 250 m spatial resolution. The maps were produced using the k nearest neighbours method applied to MODIS imagery and trained from National Forest Inventory photo plot data. For detailed information about map production methods please refer to Beaudoin et al. (2018) "Tracking forest attributes across Canada between 2001 and 2011 using the k nearest neighbours mapping approach applied to MODIS imagery." Canadian Journal of Forest Research 48, 85-93. https://cfs.nrcan.gc.ca/publications?id=38979 The map datasets may be downloaded from https://nfi.nfis.org/downloads/nfi_knn2011.zip or https://open.canada.ca/data/en/dataset/ec9e2659-1c29-4ddb-87a2-6aced147a990 * Note: the forest composition (leading tree genus) map depicts forest attributes in 2001.How can this data be used?The resolution and accuracy of these map products are best suited for strategic-level forest reporting and informing policy and decision making at regional to national scales. As these maps also offer a coherent set of quantitative values for a large suite of forest attributes, they can be used as baseline information for modelling and in calculations such as merchantable forest volume or percentage of tree species. It is also possible to overlay these maps with other maps produced on the same pixel grid to make assessments of disturbance impacts, such as fire and harvests.

Patterns of wet deposition of the nitrate (NO3), non-sea-salt sulfate (xSO4) and ammonium (NH4) ions across areas of Canada and the United States are based on measurements of precipitation depth and ion concentrations in precipitation samples. xSO4 refers to the wet deposition of sulfate with the sea-salt sulfate contribution removed at coastal sites. These measurements were collected and quality controlled by their respective networks: in Canada, the federal Canadian Air and Precipitation Monitoring Network (CAPMoN) and provincial or territorial networks in Alberta, New Brunswick, the Northwest Territories, Nova Scotia, Ontario and Quebec. In the United States, wet deposition measurements were made by two coordinated networks: the National Atmospheric Deposition Program (NADP) / National Trends Network (NTN) and the NADP/Atmospheric Integrated Research Monitoring Network (AIRMoN). Only data from sites that were designated as regionally representative were used in the mapping. Wet deposition amounts were interpolated by ordinary kriging using ArcMap Geostatistical Analyst. The map is limited to the contiguous U.S. and southeastern or southern Canada because outside that region, the interpolation error exceeds 30% due to the larger distances between stations. Links to annual and five-year average maps are available in the associated resources.

This dataset includes all drainage culverts with a n opening diameter of less than 2 metres. Culverts with a diameter greater than 2 metres are defined as structural culverts and are not present in this dataset.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

A feature is a representation of a real world object, such as a lake, stream, dam or rapid. There are three hydrographic feature classes:  points, lines and polys. All may impede or be hazardous to waterflow and/or navigation on a watercourse or waterbody. This data shows natural and manmade point features. Examples include: * waterfalls * rapids * rocks * Sea Lamprey barriers * shipwrecks This product requires the use of geographic information system (GIS) software. [Technical Bulletin: Data migrated to new Ontario Hydro Network (OHN) - Hydrographic Feature Data Classes (PDF)](https://geohub.lio.gov.on.ca/datasets/mnrf::ontario-hydro-network-ohn-hydrographic-point/)

A feature is a representation of a real world object, such as a lake, stream, dam or rapid. There are three hydrographic feature classes:  points, lines and polys.   All may impede or be hazardous to waterflow and/or navigation on a watercourse or waterbody. This data shows natural and manmade poly features.  Examples include: * break walls * dams * rapids * shipwrecks [Technical Bulletin: Data migrated to new Ontario Hydro Network (OHN) - Hydrographic Feature Data Classes (PDF)](http://geo2.scholarsportal.info/proxy.html?http:__maps.scholarsportal.info/files/PDFS/public/OGDE/OHN/TB-OHN-PostMigration_101112.pdf)

A feature is a representation of a real world object, such as a lake, stream, dam or rapid. There are three hydrographic feature classes:  points, lines and polys.   All may impede or be hazardous to waterflow and/or navigation on a watercourse or waterbody. This data shows natural and manmade line features. Examples include: * break walls * dams * waterfalls * lock-gates * rapids * rocks * Sea Lamprey barriers * shipwrecks This product requires the use of geographic information system (GIS) software. [Technical Bulletin: Data migrated to new Ontario Hydro Network (OHN) - Hydrographic Feature Data Classes (PDF)](http://geo2.scholarsportal.info/proxy.html?http:__maps.scholarsportal.info/files/PDFS/public/OGDE/OHN/TB-HydrographicFeatureClasses_Implementation_100908.pdf)