A claim is a parcel of land located or granted for hard rock mining. A claim also includes any ditches or water rights used for mining the claim, and all other things belonging to or used in the working of the claim for mining purposes. A claim is a rectangular plot of ground that does not exceed 1,500' X 1,500'. All angles of a claim must be right angles, except in cases where a boundary line of a previously located claim is adopted as common to both locations.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This dataset represents surface to bedrock isopach (thickness in metres) map of glacial drift for the Province of Saskatchewan at 1:1 000 000 scale.This dataset represents surface to bedrock isopach (thickness in metres) map of glacial drift at 1:1 000 000 scale. This data was created as a file geodatabase feature class and output for public distribution. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule. 

Base waterbody polygon arcs are feature type, source and capture date attributed arcs that make up the boundaries of base waterbody polygons in the Base Features Hydrography geospatial dataset. These arcs were collected from conversion processes of 1:20 000, 1:50 000 and AVI Provincial mapping datasets and 1:50 000 National Topographic Data Base (NTDB).

A placer claim is a parcel of land located or granted for placer mining. A claim also includes any ditches or water rights used for mining the claim and all other things belonging to or used in the working of the claim for mining purposes. A placer claim is a rectangular plot of ground. All angles of a claim must be right angles, except in the case where a boundary line of a previously located claim is adopted as common to both locations. The length of a regular placer claim from post one to post two is 500 feet along a baseline. Co-discovery claims must not exceed 1250 feet each and single discovery claims must not exceed 1500 feet.Distributed from the [GeoYukon](https://yukon.ca/geoyukon) digital map data collection by [Yukon government](https://yukon.ca/maps) . Discover more digital map data and interactive maps at Yukon government's [Open Maps](https://metadata-yukon.hub.arcgis.com) collection.For more information: [Geomatics.Help@yukon.ca](mailto:Geomatics.Help@yukon.ca)

This 1:20,000. scale inventory contains digital maps of cancelled community watershed boundaries. The watershed boundaries showed the location of watersheds that supply communities with domestic water. These are meant to be used in conjunction with stream network map coverages from TRIM mapping. Attribute data for community watersheds can be downloaded into a spreadsheet or database

This dataset is produced for the Government of Alberta and is available to the general public. Note that the distribution contact is different for the general public than for Government of Alberta ministries. Please consult the Distribution Information of this metadata for the appropriate contact to acquire this dataset. The National Topographic System of Canada (NTS) is a national mapping reference grid defined by Natural Resources Canada (NRCan) that is based on degrees of latitude and longitude. Starting at the Prime Meridian and at the Equator, the 1:50 000 grid is formed by intersecting every 1/8 degree of the meridians with every 1/4 degrees of parallels. It is also true that the standard 1:20 000 NTS block is broken down into 4 1:20 000 blocks that are labelled by quadrant. Each polygon in the grid is designated with a two digit number. a single letter. two additional numbers and a two letter quadrant value (Example 83H08NE). The 1:20 000 NTS grid was developed to support the Provincial Digital Base Mapping Project and is not part of the formal NRCan NTS program. The province of Alberta is covered by 2838 complete and 269 partially complete 1:20 000 NTS blocks.

Topographic maps produced by Natural Resources Canada conform to the National Topographic System (NTS) of Canada. Indexes are available in three standard scales: 1:1,000,000, 1:250,000 and 1:50,000. The area covered by a given mapsheet is determined by its latitude and longitude. 1:1,000,000 mapsheets are identified by a combination of three numbers (e.g. 098). 1:250,000 mapsheets are identified by a combination of numbers, and letters ranging from A through P (e.g. 098C). Sixteen smaller segments (1 to 16) form blocks used for 1:50,000 mapping (e.g. 098C03).

Yukon Oil and Gas Rights Disposition Process. Call for Bids (CFB) - an invitation to submit bids for posted locations. The Call for Bids dataset contains basic information on disposition process administered by Yukon Government. For more information on disposition process visit [https://yukon.ca/en/doing-business/licensing/apply-oil-and-gas-rights#disposition-overview](https://yukon.ca/en/doing-business/licensing/apply-oil-and-gas-rights)Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This dataset is produced for the Government of Alberta and is available to the general public. Note that the distribution contact is different for the general public than for Government of Alberta ministries. Please consult the Distribution Information of this metadata for the appropriate contact to acquire this dataset. The National Topographic System of Canada (NTS) is a national mapping reference grid defined by Natural Resources Canada (NRCan) that is based on degrees of latitude and longitude. Starting at the Prime Meridian and at the Equator, the 1:50 000 grid is formed by intersecting every 1/4 degree of the meridians with every 1/2 degrees of parallels. It can also true that the standard 1:250 000 NTS block is broken down into 16 1:50 000 blocks that a numbered south to north alternating east to west then west to east from one to 16. Each polygon in the grid is designated with a two digit number. a single letter and two additional numbers (Example 83H08). The province of Alberta is covered by 670 complete and 131 partially complete 1:50 000 NTS blocks.

The map displays bedrock formations at or near the surface of the land, on the sea floor above the continental crust that forms the Canadian landmass, and oceanic crust surrounding the landmass. The bedrock units are grouped and coloured according to geological age and composition. The colours of offshore units and oceanic crust are paler and more generalized than those on land, although the constituent units offshore are still easily discernible from their dashed boundaries. This colour design, coupled with the use of a white buffer zone at the coast allows the coastline of Canada to be readily distinguished and still show the grand geological architecture of the Canadian landmass.The map also shows major faults that have disrupted the Earth's crust, onshore and offshore, and a variety of special geological features such as kimberlite pipes, which locally contain diamonds, impact structures suspected to have been caused by meteorites, and extinct and active spreading centres in the surrounding oceans.