These are derived products of ocean bottom temperature at St. Anns Bank Marine Protected Area (MPA), utilizing outputs from two numerical models: 1) Pseudo-analysis from the Coastal Ice-Ocean Prediction System for the East Coast of Canada (CIOPS-E v2.0.0) at 1/36° horizontal grid developed and implemented operationally at Environment and Climate Change Canada, covering 2016-2023 through combining research and operational runs from this system (https://eccc-msc.github.io/open-data/msc-data/nwp_ciops/readme_ciops_en/); 2) The Global Ocean Physics Reanalysis (GLORYS12v1), a 1/12° data assimilative reanalysis product produced by the Mercator Ocean International and implemented by the CMEMS, spanning from 1993 to 2023 ( https://doi.org/10.48670/moi-00021). The daily bottom temperature data presented here are calculated as daily area averages. The ocean bottom temperature data from the model available here are validated against in-situ observations from the open data (https://open.canada.ca/data/en/dataset/910b8e22-2fd1-4ba1-8db6-d16763c7a625). These products may be used to gain knowledge of ocean bottom temperature changes in the MPA over the past 8 and 30 years.Cite this data as: Casey, M., Hu, X, Tao, J., and Shen, H. Ocean Bottom Temperature Variations from CIOPS-E and GLORYS12 Models at St. Anns Bank. Published: August 2024. Ecosystems and Oceans Science, Maritimes region, Fisheries and Oceans Canada, Dartmouth NS. https://open.canada.ca/data/en/dataset/019f9138-6e3c-4f0e-997e-879e1ec2c42d

Many geometrical schemes - or map projections - are used to represent the curved surface of the Earth on map sheets. Canada uses the **Universal Transverse Mercator** (UTM) system. It is called transverse because the strips run north-south rather than east-west along the equator. This data class shows a 5 km x 5 km grid coordinate system based on the UTM projection using the North American Datum 83 (NAD83). It includes a UTM Map Sheet Number.

Specific location of addresses, excluding apartment numbers.Attributes:Municipality - Municipality Code - Municipality CodeNo_Civic - Civic NumberType_Lane - Road Type_Lane - LinkName_Lane - LinkName_Lane - Link Road - Name of the wayOrientation - Name of the wayOrientation - Orientation of the lane (N, S, E, O) STREET - Full name of the streetAddress - Address**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

These lines represent routes within Motor Vehicle Prohibition Regulation Areas where motor vehicles are prohibited or restricted year round or seasonally. These lines were created as a visual representation of the Wildlife Act Motor Vehicle Prohibition Regulations. Under the Motor Vehicle Prohibition Regulation of the provincial Wildlife Act, motor vehicle use on crown land in B.C. may be prohibited or restricted. This data is a summary of the Motor Vehicle Prohibition Regulations, and is intended for general information purposes only. Where there is a discrepancy between these maps and the Regulations, the Motor Vehicle Prohibition Regulations are the final authority. Motor Vehicle Prohibitions (MVP) are put in place for a variety of reasons. MVPs can be used to: * protect habitat * reduce disturbance and displacement of wildlife * provide areas for hunters on foot, bike or horseback to hunt without motorized vehicles present * reduce hunter harvest while maintaining hunting opportunity   Motor vehicles include but are not limited to: * vehicles * ATVs/UTVs * snowmobiles * motorcycles * electric bikes   For full definitions and detailed regulations, visit the Motor Vehicle Prohibition Regulations website (available under Related Links). There are 2 types of motor vehicle restrictions under the Wildlife Act, and all types can be seasonal or year-round. 1. **Motor Vehicle Closed Area** (formerly referred to as Access Management Areas (AMAs): Prohibits the use or operation of a motor vehicle and e-bike. These prohibitions can be for all motor vehicles, or specific to ATVs/e-bikes or snowmobiles. 2. **Motor Vehicle Hunting Closed Area**: The operation of motor vehicles and e-bikes to hunt, transport wildlife, transport equipment and supplies which are intended for or in support of hunting, or transport hunters to and from the location of wildlife is prohibited. These prohibitions can apply to all motor vehicles, or be specific to ATVs/e-bikes or snowmobiles.

Plankton (zooplankton and large phytoplankton) are collected using the Continuous Plankton Recorder (CPR) in the Northwest (NW) Atlantic along tracks transited by container ships from Reykjavik (Iceland) to St. John’s, NL (the Z line), and between St. John’s and the New England Coast, along the Scotian Shelf (the E and MD lines). The CPR Survey is the longest running, most geographically extensive marine ecological survey in the world, providing comparable data on the geographical distribution, seasonal cycles and year-to-year changes in abundance of plankton over a large spatial area. The first northwest Atlantic samples were collected in the Irminger Sea in 1957, and sampling was extended farther west to the Scotian Shelf a few years later. Sampling has continued to the present with some interruptions during the late 1970s and 1980s. Sampling is nominally once per month along the E, MD, and Z lines. DFO Sample collection and analysis are led by the Continuous Plankton Recorder Survey program at the Marine Biological Association of the UK. DFO provides partial support for the northwest Atlantic survey carried out on the E, MD, and Z lines and incorporates CPR data in Atlantic Zone Monitoring Program ocean environmental status reporting.

BCGS 1:2,500 scale grid, North Amercian Datum 1983. The British Columbia Geographic System is a geographic system in which the coverage in minutes and seconds of longitude is double the coverage in minutes and seconds of latitude for sheets at all scales

These polygons represent areas across the Province where motor vehicles are prohibited or restricted year round or seasonally. These areas were created as a visual representation of the Wildlife Act Motor Vehicle Prohibition Regulations. Under the Motor Vehicle Prohibition Regulation of the provincial Wildlife Act, motor vehicle use on crown land in B.C. may be prohibited or restricted. This data is a summary of the Motor Vehicle Prohibition Regulations, and is intended for general information purposes only. Where there is a discrepancy between these maps and the Regulations, the Motor Vehicle Prohibition Regulations are the final authority. Motor Vehicle Prohibitions (MVP) are put in place for a variety of reasons. MVPs can be used to: * protect habitat * reduce disturbance and displacement of wildlife * provide areas for hunters on foot, bike or horseback to hunt without motorized vehicles present * reduce hunter harvest while maintaining hunting opportunity   Motor vehicles include but are not limited to: * vehicles * ATVs/UTVs * snowmobiles * motorcycles * electric bikes   For full definitions and detailed regulations, visit the Motor Vehicle Prohibition Regulations website (available under Related Links). There are 2 types of motor vehicle restrictions under the Wildlife Act, and all types can be seasonal or year-round. 1. **Motor Vehicle Closed Area** (formerly referred to as Access Management Areas (AMAs): Prohibits the use or operation of a motor vehicle and e-bike. These prohibitions can be for all motor vehicles, or specific to ATVs/e-bikes or snowmobiles. 2. **Motor Vehicle Hunting Closed Area**: The operation of motor vehicles and e-bikes to hunt, transport wildlife, transport equipment and supplies which are intended for or in support of hunting, or transport hunters to and from the location of wildlife is prohibited. These prohibitions can apply to all motor vehicles, or be specific to ATVs/e-bikes or snowmobiles.

BRIDGES_PT_25K contains center point locations of bridges along roads. It does not include bridges along Unmaintained Roads.Distributed from GeoYukon by the Government of Yukon. Discover more digital map data and interactive maps from Yukon's digital map data collection.[geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Delimitation of the electoral districts of the last municipal elections. Each district is represented by a municipal councillor elected by the district's voters.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The data in this information product illustrates the boundaries of Alberta's 87 Provincial Electoral Divisions. Electoral Boundaries are defined by the Alberta Election Act, Chapter E-1, 2018. Provincial Electoral Divisions (PEDs) are territorial units represented by an elected Member to serve in the Alberta Provincial Legislative Assembly. The Provincial Electoral Divisions used in this information product were enacted in December 2017 and came into effect for the 2019 provincial general election.