Home /Search
Search datasets
We have found 78 datasets for the keyword "acid sensitivity". You can continue exploring the search results in the list below.
Datasets: 104,029
Contributors: 42
Results
78 Datasets, Page 1 of 8
Acid Sensitive Lakes, Oil Sands Region
Acid-Sensitive LakesNine hundred and thirty-three lakes located in Saskatchewan, Alberta and the Northwest Territories were sampled to establish current acidification status. Of the 933 lakes, 244 (or 26%) are considered acid sensitive, almost always because of naturally low calcium and magnesium (or "base cation") concentrations. The most acid-sensitive lakes (i.e., those with extremely low base cation concentrations) are located on the Canadian Shield in both Alberta and Saskatchewan and east of the oils sands development area.Fifty-one of the 244 acid-sensitive lakes were sampled twice annually (spring and fall) to identify chemical changes through trend analyses. Results revealed that 55% of these lakes had concentrations of some metals in excess of Canadian Council of Ministers of the Environment guidelines. Of the 291 samples taken in the 51 lakes, iron concentrations were greater than guidelines in 36% (105 samples), aluminum in 33% (97 samples), lead in 0.3% (1 sample) and copper in 0.3% (1 sample). The metals in these lakes occur naturally and are expected to be found in a wide range of concentrations given the geology and physiography of the Canadian Shield. It remains to establish the relationship between acid sensitivity, geology and high metal concentrations.
Visual Landscape Inventory
The VLI identifies and delineates areas of visual sensitivity near communities and along travel corridors throughout the province. It includes information about the visual condition, characteristics and sensitivity to alteration. It also houses scenic area and established Visual Quality Objective ( VQO ) attributes.
Maps of biogeochemistry and soil properties for use as indicators of site sensitivity to logging residue harvesting
This publication contains thirteen (13) maps of different biogeochemical and soil properties of forest ecosystems of Canada’s managed forest. A scientific article gives additional details on the methodology: Paré, D., Manka, F., Barrette, J., Augustin, F., Beguin, J. 2021. Indicators of site sensitivity to the removal of forest harvest residues at the sub-continental scale: mapping, comparisons, and challenges. Ecol. Indicators. https://dx.doi.org/10.1016/j.ecolind.2021.107516
Fish culture operation areas of impact
Data set includes the smaller areas of sensitivity (a standard radius around water intake points) and the larger areas of concern (determined by land, soil and water characteristics of the surrounding area).
Recreational Features Inventory
The RFI identifies areas of land and water encircling a recreation feature or combination of features that support, or have the potential to support, one or more recreation activities. These areas are rated for their significance or importance to recreation and for their sensitivity to alteration
Importance of the forest industry to the regional economy
Many communities in Canada depend to some extent on forestry and the forest sector. The importance of the forest industry to the regional economy can be assessed using the CanEcumene GIS Database. “Ecumene” is a term used by geographers, meaning “inhabited lands.” A forest ecumene refers to areas where human settlement coincides with forested areas, including locations where people depend on the forest for their livelihood. Populated places in the ecumene database are referenced using natural boundaries, as opposed to administrative or census boundaries, and provide a more suitable means for integrating socio-economic data with ecological and environmental data in a region.An analysis of ecumene labour force data and location of mill facilities resulted in a generalized rendering showing regional dependency of the forest industry. The location of mill facilities layer includes information on mill type (i.e., pulp and saw) and ownership. The sensitivity to forest industry layer shows which forest communities and regions are more sensitive to economic impacts in the forest industry.Two layers are provided: the sensitivity of forest communities and regions to forest industry, and the location of mill facilities.
Biological Sensitivity Mapping for Oil Spill Planning and Response, Quebec Region
The Planning for an Environmental Response (PIER) initiative falls under the umbrella of the Government of Canada's Oceans Protection Plan (OPP), whose goal is preserving marine ecosystems vulnerable to increased transportation and the development of the marine industry (https://pm.gc.ca/en/news/backgrounders/2016/11/07/canadas-oceans-protection-plan-preserving-and-restoring-canadas). The PIER was established in response to recommendations made in a 2013 report "A review of Canada's ship-source spill preparedness and response regime " by the Tanker Safety Expert Panel (https://tc.canada.ca/en/marine-transportation/marine-safety/tanker-safety-expert-panel). One of the recommendations calls on Fisheries and Oceans (DFO) to work with Environment and Climate Change Canada (ECCC) to collect and compile information on sensitive species and environments for each Canadian Coast Guard (CCG) response area and make it publicly available.The PIERs’ main mandate is to acquire and update biological sensitivity data under its jurisdiction for preparation and response purposes in the event of an oil spill. With DFO-Science, PIER supports ECCC's National Environmental Emergencies Centre (NEEC) and the CCG in their preparations and responses through the sharing of data on biological sensitivities, the development of response tools and expert advice.In this vein, DFO published an analysis in 2018 that aimed to identify the most vulnerable components of the St. Lawrence in order to prioritize them during data collection if gaps were identified (Desjardins et al. 2018). This exercise highlighted the vulnerability of several biological components and important data gaps, particularly in coastal areas. As a result of this finding, the Quebec region PIEI team embarked on a collaborative project with the Université du Québec à Rimouski (UQAR) to map eelgrass beds, tidal marshes and macroalgal beds. In consultation with other DFO-Science data producers, this team has also created datasets adapted for response purposes, notably regarding bivalves and marine mammals. These layers may be used for oil spill preparedness and response by DFO-Quebec Region's Environmental Incident Coordinator, NEEC and CCG. Several of them, deemed relevant in the first 72 hours following a spill, have been transmitted to the NEEC.
Multidisciplinary Arctic Program (MAP)-Last Ice, 2018 Spring Campaign: Sea ice fatty acids and stable isotopes
In 2018, Fisheries and Oceans Canada initiated the Multidisciplinary Arctic Program (MAP) – Last Ice, the first ecosystem study of the poorly characterized region of Tuvaijuittuq, where multiyear ice still resides in the Arctic Ocean. The program MAP-Last Ice takes a coordinated approach to integrate the physical, biochemical, and ecological components of the sea ice-ocean connected ecosystem and its response to climate and ocean forcings. This program provides baseline ecological knowledge for Tuvaijuittuq and, in particular, for its unique multiyear ice ecosystem. The database provides baseline data on fatty acid composition and stable isotopes signatures of sea ice communities in multi- and first-year ice in Tuvaijuittuq. The data were collected during the 2018 spring field campaign of the MAP-Last Ice Program, offshore of Canadian Forces Station (CFS) Alert, in the Lincoln Sea.
The Acidic Precipitation in Ontario Study (A.P.I.O.S.)
The Acidic Precipitation in Ontario Study (A.P.I.O.S.) was established in 1979 by the Ontario Ministry of the Environment to protect the environment from the detrimental effects of acidic deposition and determine the effects of acidic deposition on terrestrial ecosystems. The effect of acid inputs on the environment depends on the quantity and acidity of atmospheric inputs, and the buffering capacity of the terrestrial and aquatic ecosystems. The effect of acidic precipitation on soil is potentially significant because the soil is the reservoir of plant nutrients and the source of much of the water for aquatic systems. Changes in the soil's chemistry may therefore be reflected in both the terrestrial and aquatic environments. Information on the effects of acidic precipitation on soils is available from effects near point sources of pollution, from experimentation with simulated rain solutions, from natural changes observed in soil over time, and from models and soil forming theories. Anticipated effects of soil acidification include: reduced pH, leaching of basic cations (such as magnesium and calcium) and other exchangeable plant nutrients, reduction in base saturation and cation-exchange capacity, mobilization of soil-bound metals such as aluminum, and changes in biological activity such as decreased nitrification and soil respiration. The principal objective of the baseline program is to establish a uniform data base for soils across the province. This data base * provides current data to identify future trends, * enables the development of laboratory experiments which define soil sensitivity criteria to acidic precipitation, and * provides information required for sensitivity mapping of soils throughout Ontario.
Emissions of harmful substances to air – Arsenic emissions to air by facility
The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track human-related emissions to air of 3 substances (mercury, lead and cadmium) and facility-based emissions to air of 1 substance (arsenic). The 4 substances are defined as toxic under the Canadian Environmental Protection Act, 1999. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, and by source. Global emissions data are also provided for mercury. The indicators inform Canadians about emissions of mercury, lead and cadmium to air from human activity and emissions of arsenic from facility-based reporting in Canada. These indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 4 substances and air pollution in general. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and
topics that matter to you.
Please send us your feedback