This thematic layer shows the location of water sampling sites authorized in Quebec under section 22 of the Environment Quality Act (chapter Q-2) and their associated volume (liter per day). Water sampling sites are the sites where water enters a facility designed to take water, both underground and surface. The database includes active authorizations to take water since the Water Withdrawal and Protection Regulation (RPEP) came into force on August 14, 2014.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Daily sea surface temperature and salinity observations have been carried out at several locations on the coast of British Columbia since the early part of the 20th century. Observations started at the Pacific Biological Station (Departure Bay) in 1914; 11 stations were added in the mid-1930s and several more in the 1960s. The number of stations reporting at any given time has varied as sampling has been discontinued at some stations and started or resumed at others.Presently termed the British Columbia Shore Station Oceanographic Program (BCSOP), there are 12 active participating stations. Most of the stations are at lighthouses staffed by Fisheries and Oceans Canada, but three (Race Rocks, Amphitrite Point, and Active Pass) are sampled by contracted observers.Observations are made daily using seawater collected in a bucket lowered into the surface water at or near the daytime high tide. This sampling method was designed long ago by Dr. John P. Tully and has not been changed in the interests of a homogeneous data set. This means, for example, that if an observer starts sampling one day at 6 a.m., and continues to sample at the daytime high tide on the second day the sample will be taken at about 06:50 the next day, 07:40 the day after etc. When the daytime high-tide gets close to 6 p.m. the observer will then begin again to sample early in the morning, and the cycle continues. Since there is a day/night variation in the sea surface temperatures the daily time series will show a signal that varies with the14-day tidal cycle. This artifact does not affect the monthly sea surface temperature data.

The Labour Force Distribution (LFD) maps are derived from the CanEcumene 2.0 Geodatabase using custom tabulations of census-based labour force data. These LFD maps were calculated for each of the five major natural resource sectors in Canada: Forestry, Fisheries, Agriculture, Minerals, and Petroleum and Coal. The measure used is the labour force of each sector as a proportion of the goods-producing sectors in the economy. Labour force proportions were first calculated at the individual community level, and then interpolated on a regional level using GIS (see Eddy et. al. 2020 for more detail). In effect, these maps show the strong importance of Canada’s natural resource sectors in various regions of the country. The darker the tone in each map indicates a region’s higher degree of dependency on a given sector for their economic livelihood.

Long-term freshwater quality data from federal and federal-provincial sampling sites throughout Canada's aquatic ecosystems are included in this dataset. Measurements regularly include physical-chemical parameters such as temperature, pH, alkalinity, major ions, nutrients and metals. Collection includes data from active sites, as well as historical sites that have a period of record suitable for trend analysis. Sampling frequencies vary according to monitoring objectives. The number of sites in the network varies slightly from year-to-year, as sites are adjusted according to a risk-based adaptive management framework. The Great Lakes are sampled on a rotation basis and not all sites are sampled every year. Data are collected to meet federal commitments related to transboundary watersheds (rivers and lakes crossing international, inter-provincial and territorial borders) or under authorities such as the Department of the Environment Act, the Canada Water Act, the Canadian Environmental Protection Act, 1999, the Federal Sustainable Development Strategy, or to meet Canada's commitments under the 1969 Master Agreement on Apportionment.

From August 5th to September 3rd, 2012, Fisheries and Oceans Canada conducted a baseline survey of marine fishes and their habitats on the Canadian Beaufort Shelf and slope. Sampling was conducted from the F/V Frosti at 28 stations along four transects. Standardized sampling was conducted at pre-determined depth stations (20-40, 75, 200, 350, 500, 750, and 1000 m) using a variety of sampling equipment including benthic fishing trawls, plankton nets, sediment cores, and CTD and water sample profiles. A specialized CTD probe (UCTD) was deployed at an additional 30 locations while the ship was underway. Presented here is the information on the sampling locations, and the sampling gear deployed at each station.

From August 2nd to September 9th, 2013, Fisheries and Oceans Canada conducted a baseline survey of marine fishes and their habitats on the Canadian Beaufort Shelf and slope. Sampling was conducted from the F/V Frosti at 64 stations along ten transects. Standardized sampling was conducted on the transects at pre-determined depth stations (20-40, 75, 200, 350, 500, 750, and 1000 m) using a variety of sampling equipment including benthic fishing trawls, plankton nets, sediment cores, and CTD and water sample profiles. A specialized CTD probe (UCTD) was deployed at an additional 72 locations while the ship was underway.Presented here is the information on the sampling locations, and the sampling gear deployed at each station.

Magnitude 5.5 earthquake scenario located directly southeast of Ladysmith Town Centre. This fault is not known to be active, but this scenario represents a small but damaging event near Ladysmith and Burleith Arm.

This is a magnitude 5.0 earthquake scenario under Lake Ontario, very close to Toronto. This fault is not known to be active but demonstrates a plausible earthquake scenario for Toronto region.

This dataset represents the locations of licenced and permitted pits and quarries regulated by the Ministry of Natural Resources and Forestry under the Aggregate Resources Act, R.S.O. 1990. Aggregate site data has been divided into active and inactive sites. Active sites may be further subdivided into partial surrenders. In partial surrenders, defined areas of a site are inactive while the rest of the site remains active. The data includes: * site location and size * licensee name * approval type (licence or permit) * operation type (pit or quarry) * maximum annual tonnage limit * the MNRF district responsible for the site Use our interactive [pits and quarries map](https://www.ontario.ca/page/find-pits-and-quarries) to find active sites. This data does not include [aggregate sites regulated by the Ministry of Transportation](https://data.ontario.ca/dataset/ministry-of-transportation-aggregate-sites).

Manual snow survey (active & inactive) locations as part of the BC Snow Survey program.