This dataset is a locational record of the meteorological input files publically available on Saskatchewan GeoHub that can be used with the Environmental Protection Agency approved Regulatory Model (AERMOD). Each file represents the meteorology over an area of the province while minimizing the influences of local terrain on air flow. Additional attribute information for each location includes coordinates and a link to download the AERMOD data as a zip file.The Air Quality Section of the Ministry of Environment uses air quality modelling to simulate how air pollutants disperse in the ambient atmosphere in order to help manage the air quality in the province. The models are used to estimate the impact of air pollutants emitted from emission sources, and are typically employed to determine whether existing or new proposed industrial facilities are or will be in compliance with the ambient air quality standards outlined in Table 20 of the province's Environmental Code, June 1, 2015 under The Environmental Management and Protection Act, 2010.  The information needed to run dispersion models consists primarily of emissions and meteorological data. Five years (2012-2016) of preprocessed meteorological datasets in an AERMOD ready format is publicly available. This file is contained in the downloadable zipped file. The zipped file contains five files: the SFC and PFL files are the AERMOD ready files required to run AERMOD (i.e., data, sensible heat flux, frictional velocity, potential temperature gradient, vertical velocity, mixing height, monin-obukhov length, surface roughness, Bowen ratio, albedo, scalar wind speed, wind direction, ambient temperature, precipitation, precipitation rate, relative humidity, surface pressure, and total cloud amounts); the DAT file contains the land use information (i.e., Surface roughness, Bowen ratio and albedo) chosen for each month in the SFC file; the KMZ file contains the wind rose for that location which can be used on Google Earth; and the PNG file contains various graphs of monthly or diurnal meteorological distribution (i.e., temperature, wind speed, daytime mixing heights and sensible heat flux, and stability) which can be used to help determine if that location is representative of the area proposed for modelling.  Please note: Since this data is newly developed, it is possible there may be issues with the data as it gets used in more applications. Ongoing changes, edits and updates may be made by the Air Quality Section of the Ministry of Environment. Is is recommended for any future modelling to download the latest version of the input files and not archive any input files on your own server for future use, unless this notification no longer exists. If there are any issues discovered with data in the zipped file, please contact Dennis Fudge at dennis.fudge@gov.sk.ca or at 306-519-7105. Your support will be greatly appreciated.  There may be times you feel that the input files are not representative of the proposed modelling domain due to the surrounding features (i.e., forest/agricultural or rural/urban) being different than those used to generate the input files. If that is the case, the modeler can generate the input modelling files themselves. The relevant files to generate these input files are available upon request. Please contact Dennis Fudge at dennis.fudge@gov.sk.ca or at 306-519-7105. 

The Ocean Data Inventory database is an inventory of all of the oceanographic time series data held by the Ocean Science Division at the Bedford Institute of Oceanography. The data archive includes about 5800 current meter and acoustic doppler time series, 4500 coastal temperature time series from thermographs, as well as a small number (200) of tide gauges. Many of the current meters also have temperature and salinity sensors. The area for which there are data is roughly defined as the North Atlantic and Arctic from 30° - 82° N, although there are some minor amounts of data from other parts of the world. The time period is from 1960 to present. The database is updated on a regular basis.

Description:Seasonal climatologies (temperature, salinity, and sigma-t) of the Northeast Pacific Ocean were computed from historical observations including all available conductivity-temperature-depth (CTD), bottle, expendable bathy-thermograph (XBT), and Argo data in NOAA (http://www.argo.ucsd.edu/), Marine Environmental Data Service (MEDS), and Institute of Ocean Sciences archives over 1980 to 2010 period in spatial resolution ranging from approximately 100m to 70km.Methods:Calculations, including smooth and interpolation, were carried out in sixty-five subregions and up to fifty-two vertical levels from surface to 5000m. Seasonal averages were computed as the median of yearly seasonal values. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March.Uncertainties:Uncertainties are introduced when quality controlled observational data are spatially interpolated to varying distances from the observation point. Climatological averages are calculated from these interpolated values.

Monthly mean temperature from Bedford Institute of Oceanography North Atlantic Model (BNAM) results were averaged over 1990 to 2015 period to create monthly mean climatology for the Northwest Atlantic Ocean, which can be considered as a representation of the climatological state of the Northwest Atlantic Ocean. The BNAM model is eddy-resolving, NEMO-based ice-ocean coupled North Atlantic Ocean model developed at the Bedford Institute of Oceanography (BIO) to support DFO monitoring programs. The data available here is monthly climatology for eight selected depths (surface, 110 m, 156 m, 222 m, 318 m, 541 m, 1062 m, bottom) in 1/12 degree spatial resolution. The data for each month from 1990 until present for the entire model domain ( 8°–75°N latitude and 100°W–30°E longitude) and various depths is available upon request.The 1990-2017 model hindcast result is compared with observational data from surface drifter and satellite altimetry. The model demonstrates good skill in simulating surface currents, winter convection events in the Labrador Sea, and the Atlantic Meridional Overturning Circulation as observed at 26.5°N and 41°N. Model results have been used to interpret changes in the Labrador Current and observed warming events on the Scotian Shelf, and are reported through the annual AZMP Canadian Science Advisory Secretariat Process.When using data please cite following:Wang, Z., Lu, Y., Greenan, B., Brickman, D., and DeTracey, B., 2018. BNAM: An eddy resolving North Atlantic Ocean model to support ocean monitoring. Can. Tech. Rep. Hydrogr. Ocean. Sci. 327: vii + 18p

The purpose of this study was to characterize the kelp bed at Batture-aux-Alouettes, a preferred food source for the green sea urchin (Strongylocentrotus droebachiensis). The green urchin is fished commercially in Quebec and the fishing effort is concentrated on the Batture-aux-Alouettes near Tadoussac, at the mouth of the Saguenay Fjord. The study was conducted in two separate phases in 2018 and 2019. The main objective of this study was to determine the abundance and biomass of the kelp bed at Batture-aux-Alouettes. The first phase, using a stratified random sampling design, was conducted from August 21th to August 24th, 2018. Sampling of two 50 x 50 cm quadrats, separated by a distance of approximately 30 m, was conducted at eleven sites during twelve dives in the eastern section of the Batture-aux-Alouettes to collect kelp for biomass estimation and macroalgal species richness assessment. In the second phase, a total of 429 stations were first sampled between July 15 and 18, 2019 with a camera system dropped in two 50 x 50 cm quadrats. The presence or absence of kelp, percent macroalgal cover, and substrate type were assessed for each photo. As a result of this underwater photographic analysis, 129 of these stations were identified as having a presence of kelp and 88 of these stations had a presence of other algal species. To ensure equal representation of the different depth strata, the stations with kelp were divided into three depth categories: shallow (-1.7 m to 0 m), medium (0 m to 2 m) and deep (2 m to 5 m). Dives were conducted from August 13 to 15, 2019, at ten of these stations using a stratified random sampling design, taking care to ensure a balanced spatial distribution as well as an equal distribution of the different depth strata (four in the shallow, three in the medium, and two in the deep). Sampling of the 50 x 50 cm dive quadrat took place at three different distances spaced 5 m apart from a transect, i.e. at the 3 m (_3m), 8 m (_8m) and 13 m (_13m) mark. If there was little or no kelp in the quadrat, the quadrat sampling could be repeated for up to four quadrats per distance for a total area of 1 m². Two additional quadrats were conducted (_x) at two stations. Biomass assessment was also done via "cookie cutter" sampling (_CC). Divers took the same 50 x 50 cm quadrat and placed it on a selected (i.e., non-random) plot with 100% kelp cover.The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes generic information about the event, such as date and location. The "additional_information_event_and_occurrence" file includes sample size, protocol and sampling effort. The "taxon_occurrence" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment of the kelp bed at Batture-aux-Alouettes, contact Rénald Belley (renald.belley@dfo-mpo.gc.ca).For quality control, the organisms were identified in the field fallowing the guide: Chabot, Robert et Anne Rossignol. 2003. Algues et faune du littoral du Saint-Laurent maritime : Guide d'identification. Institut des Sciences de la mer de Rimouski, Rimouski; Pêches et Océans Canada (Institut Maurice-Lamontagne), Mont-Joli. 113 pages. The taxonomy was checked against the World Register of Marine Species (WoRMS) to match recognized standards and using the R obistools and worrms libraries. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. All sample locations were spatially validated. This project was funded by DFO Coastal Environmental Baseline Program under Canada’s Oceans Protection Plan. This initiative aims to acquire environmental baseline data contributing to the characterization of important coastal areas and to support evidence-based assessments and management decisions for preserving marine ecosystems.

Argo is a key component of the Global Ocean Observing System (GOOS) with an array of about 4,000 autonomous instruments reporting on ocean conditions. These floats collect data on ocean temperature and salinity, and in some cases, additional properties that characterize the ocean’s biological and chemical processes. Established in 1999, Argo represents an international collaboration involving contribution from more than 30 nations. Data from Argo floats are made publicly available within 24 hours of collection time, for free. The data provide valuable information on changes to the Earth's climate and hydrological cycle. They are used for a variety of purposes, such as assessing climate change, improving weather forecasts and developing ocean models.Argo Canada, led by Fisheries and Oceans Canada, has been a key contributor to the International Argo Program since its inception in 2001 . The program has been supported by contributions from Department of Environment and Climate Change Canada, Department of National Defense, Dalhousie University, University of Victoria and Ocean Networks Canada.

This data report provides information on temperature and salinity in the Godbout region of the St. Lawrence Estuary. Sampling was carried out from 2019 to 2021 over an area of <5 km2. The databases provide information on temperature and salinity at an hourly rate for 2 years. The aim of this project is to analyze telemetry data from sea urchins (Strongylocentrotus droebachiensis), snow crabs (Chionoecetes opilio), rock crabs (Cancer irroratus), spider crabs (Hyas spp.) and whelks (Buccinum undatum). This report focuses on the presentation of benthic environmental data collected throughout the study with high spatial and temporal resolution. All reported variables were collected at the seafloor, as the aim of the project was to study the movement of epibenthic species. Temperature data were collected from three devices: telemetry receivers with integrated temperature sensors (InnovaseaTM), HoboTM and Star-OddiTM probes. Temperature data processing involved cleaning up extreme values (below 2°C and above 20°C) and homogenizing the data to fit the bathymetry matrix (1m x 1m cells) of the study site. Temperature data are provided in a NetCDF file with a matrix of the entire study site, where there is a stratum for each hour between August 2019 and October 2021 and in each file, a temperature value for each pixel of the raster. Salinity data were collected from Star-OddiTM probes only. Salinity values were averaged hourly for the entire study area. Salinity data is provided as a CSV file with one salinity value per hour for the entire study area.

PURPOSE:To record hourly water temperatures throughout the Margaree watershed.DESCRIPTION:The Department of Fisheries and Oceans (DFO) has been deploying water temperature monitoring equipment since spring 1993 in the Margaree River watershed. Coverage has changed throughout the time series and there is little documentation regarding equipment used. In recent years data have been collected using VEMCOs. USE LIMITATION:To ensure scientific integrity and appropriate use of the data, we would encourage you to contact the data custodian.

This dataset provides projected sea surface temperature and salinity as well as projected ocean bottom temperature and salinity in the Northwest Atlantic under a high emission scenario Representative Concentration Pathway (RCP) 8.5. The results are generated by a North Atlantic Ocean-ice Downsling System (NAODS) that downscales the global Climate Change System Model Version 4 (CCSM4) output. NAODS couples 1/12-degree model for the northwest Atlantic with a 1/4-degree model for the North Atlantic (Han et al., 2025). Bi-decadal means are included for 1986-2005, 2006-2025, 2026-2045, 2046-2065, 2066-2085, and 2080-2099, respectively.

Moored instrument time series data include current velocity, temperature, salinity, oxygen, fluorescence, transmissivity, turbidity, sediment trap data and particle capture of carbon, nitrogen, and silicon.These data were collected by researchers from the Institute of Ocean Sciences, Sidney, BC, from locations in the North Pacific.The data links below are only a representative sample of the entire collection. If you require more data, please send your request to the data contact.