The DND Air Weapons Range dataset is comprised of all the polygons that represent the Air Weapons Range established by the Department of National Defence, Government of Canada, within the Province of Alberta. Air Weapons Range is the area used as a practice and firing range with restricted access provisions and which is owned and operated by the Department of National Defence, Government of Canada.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Air pollutant emissions indicators track emissions from human activities of 6 key air pollutants: sulphur oxides (SOX), nitrogen oxides (NOX), volatile organic compounds (VOCs), ammonia (NH3), carbon monoxide (CO) and fine particulate matter (PM2.5). Black carbon, which is a component of PM2.5, produced by combustion, is also reported. Sectoral indicators on air pollutant emissions from the oil and gas industry, transportation, off-road vehicles and mobile equipment and electric utilities provide additional analysis on the largest sources of Canada's air pollutant emissions.For each air pollutant, the indicators are provided at the national and provincial/territorial levels. They also identify the major sources of emissions and provide links to detailed information on air pollutant emissions from facilities. The Air pollutant emissions indicators are intended to inform Canadians and decision makers about progress made towards reducing emissions from human-related sources of air pollutants and about the effectiveness of emission reduction measures in reducing emissions to improve ambient air quality in Canada. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Department of National Defence has designated Firing Practice and Exercise Areas off the coasts of Canada. Activities in these areas may include bombing practice from aircraft, air-to-air, air-to-sea or ground firing, and anti-aircraft firing, etc. In Atlantic Canada, the Nova Scotia Area includes sea area employments for sub-surface operations and firing exercises (FIREX). The Gulf of St. Lawrence Area, excluding the French territorial waters of Saint-Pierre et Miquelon, includes sea area employments for sub-surface operations and underwater demolition training. For full details, see the Notices to Mariners, Section F, National Defence Military Notices, available online: https://www.notmar.gc.ca/publications/annual-annuel/section-f/f35-en.pdf.Legal Constraints: Users should be aware that the polygons depicting firing practice and exercise areas are intended for illustration only and should not be used for navigational or legal purposes.

The Regional Deterministic Air Quality Analysis (RDAQA) is an objective analysis of surface pollutants which combines numerical forecasts from the Regional Air Quality Deterministic Prediction System (RAQDPS) and hourly observational data from monitoring surface networks over North America in order to produce a better description of the air quality at every hour. Chemical constituents include 03, SO2, and NO2 gases, as well as fine particulate matter PM2.5 (2.5 micrometers in diameter or less) and coarse particulate matter PM10 (10 micrometers in diameter or less). Geographical coverage is Canada and the United States. Data is available only for the surface level, at a horizontal resolution of 10 km. The products are presented as historical, annual or monthly, averages which highlight long-term trends in cumulative effects on the environment.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. These indicators track human-related emissions to air of 3 substances (mercury, lead and cadmium) and facility-based emissions to air of 1 substance (arsenic). The 4 substances are defined as toxic under the Canadian Environmental Protection Act, 1999. For each substance, data are provided at the national, regional (provincial and territorial) and facility level, and by source. Global emissions data are also provided for mercury. The indicators inform Canadians about emissions of mercury, lead and cadmium to air from human activity and emissions of arsenic from facility-based reporting in Canada. These indicators also help the government to identify priorities and develop or revise strategies to inform further risk management and to track progress on policies put in place to reduce or control these 4 substances and air pollution in general. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The Regional Air Quality Deterministic Prediction System FireWork (RAQDPS-FW) carries out physics and chemistry calculations, including emissions from active wildfires, to arrive at deterministic predictions of chemical species concentration of interest to air quality, such as fine particulate matter PM2.5 (2.5 micrometers in diameter or less). Geographical coverage is Canada and the United States. Data is available at a horizontal resolution of 10 km. While the system encompasses more than 80 vertical levels, data is available only for the surface level. The products are presented as historical, annual or monthly, averages which highlight long-term trends in cumulative effects on the environment.

The Air Quality Health Index (AQHI) is a scale designed to help quantify the quality of the air in a certain region on a scale from 1 to 10. When the amount of air pollution is very high, the number is reported as 10+. It also includes a category that describes the health risk associated with the index reading (e.g. Low, Moderate, High, or Very High Health Risk). The AQHI is calculated based on the relative risks of a combination of common air pollutants that are known to harm human health, including ground-level ozone, particulate matter, and nitrogen dioxide. The AQHI formulation captures only the short term or acute health risk (exposure of hour or days at a maximum). The formulation of the AQHI may change over time to reflect new understanding associated with air pollution health effects. The AQHI is calculated from data observed in real time, without being verified (quality control).

Mackenzie Valley Air Photo Digital Orthotiles

Results of the last hour available, in real time, of the [Air Quality Index (AQI)] (https://www.iqa.environnement.gouv.qc.ca/contenu/index.asp) for the stations of the [Quebec Air Quality Monitoring Network] (https://www.environnement.gouv.qc.ca/air/reseau-surveillance/Carte.asp). These results exclude those from stations located on [Montreal Island] (https://www.donneesquebec.ca/recherche/dataset/vmtl-rsqa-indice-qualite-air).The IQA is an information and awareness tool designed to inform the population about the quality of ambient air in Quebec.If you have any questions about this data, contact the Info-Air department:.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The Ministry of Environment operates a network of continuous ambient air monitoring stations to measure the concentration of air pollutants across Saskatchewan. This is considered validated data that has undergone quality control and quality assurance. For best results download the entire dataset without filtering as a CSV. ‘Date and time’ as displayed is your local time. However, downloaded data is in UTC for ‘Date and time’. Any values of -9999, -999, or 9980 are invalid data.Download zip file. The Ministry of Environment operates a network of continuous ambient air monitoring stations. These stations are part of the National Air Pollution Surveillance (NAPS) network. Continuous ambient air monitoring stations measure the concentration of air pollutants across Saskatchewan. The data is used to:  • track and report on progress for achieving air quality objectives • measure representative pollutant concentrations and determine long-term trends and • provide air quality information to the public Air pollutants typically come from various industrial activity and natural sources, such as mining, oil and gas, agriculture, forest fires, electrical generation, and the transportation sector. Disclaimer: Hourly data from the Saskatchewan Ministry of Environment monitoring stations is validated and updated every quarter. This is the most up-to-date and accurate information available. A final annual review occurs in spring where data are subject to change. For more information please visit the ministry's Air Quality Monitoring page or contact the Ministry of Environment Inquiry Centre: centre.inquiry@gov.sk.ca 1-800-567-4224