The Agri-Environmental Indicator - Agriculture Ammonia Emissions datasets provides estimated amounts of ammonia (NH3) emitted into the atmosphere through agricultural activities.Products in this data series present results for predefined areas as defined by the Soil Landscapes of Canada (SLC v.3.2) data series, uniquely identified by SOIL_LANDSCAPE_ID values.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Air pollutant emissions indicators track emissions from human activities of 6 key air pollutants: sulphur oxides (SOX), nitrogen oxides (NOX), volatile organic compounds (VOCs), ammonia (NH3), carbon monoxide (CO) and fine particulate matter (PM2.5). Black carbon, which is a component of PM2.5, produced by combustion, is also reported. Sectoral indicators on air pollutant emissions from the oil and gas industry, transportation, off-road vehicles and mobile equipment and electric utilities provide additional analysis on the largest sources of Canada's air pollutant emissions.For each air pollutant, the indicators are provided at the national and provincial/territorial levels. They also identify the major sources of emissions and provide links to detailed information on air pollutant emissions from facilities. The Air pollutant emissions indicators are intended to inform Canadians and decision makers about progress made towards reducing emissions from human-related sources of air pollutants and about the effectiveness of emission reduction measures in reducing emissions to improve ambient air quality in Canada. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

The theme on physicochemical monitoring of rivers and rivers presents data from all stations in networks monitoring water quality in rivers in Quebec and the St. Lawrence River.The purpose of networks for monitoring general water quality is to characterize, using current physicochemical and bacteriological parameters, the quality of water in spatial terms and to monitor the evolution of this quality over time. For the regular monitoring of the general quality of river and river water, the parameters measured are: total phosphorus, total nitrogen, nitrites and nitrates, ammonia nitrogen, chlorophyll a, pheopigments, faecal coliforms, faecal coliforms, turbidity, suspended matter, pH, conductivity, dissolved organic carbon and temperature. This data is used to calculate the Bacteriological and Physicochemical Water Quality Index (IQBP), a water quality classification index.The data set on physicochemical monitoring of rivers and rivers also includes the drainage areas of some of the stations. The attribute table provides a compilation of land use by category for the last year available at the time the data was generated. Follow-up is carried out annually.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Digitization of long-term water chemistry data collected between 1920's - 1990's from lakes across Saskatchewan by the Saskatchewan Fisheries Research Laboratory. Samples were collected using methods from the Standard Methods for the Examination of Water and Wastewater (APHA, AWWA and WPCF). This data serves as a baseline for water quality.This dataset is a digitization from paper records of water chemistry data across Saskatchewan collected by the Saskatchewan Fisheries Research Laboratory. Data ranges from the 1920's to the 1990's and were sampled using methodes from the Standard Methods for the Examination of Water and Wastewater (American Public Health Association, American Water Works Association and Water Pollution Control Facility) This long-term water chemistry data serves as a baseline for water quality. Different variables of water chemistry are organized into individual fields. The units of measurement appear at the end of each field name. Due to the historical nature of the data some uncertainty exist in values.  Additonal notes on data: ND: no detection Trace: trace amounts Nil: zero NA: no data 

The Ontario Hydro Network (OHN) is a provincial medium scale originating from data with regional scales of 1: 10,000 in Southern Ontario, 1: 20,000 in Northern Ontario and 1: 50,000 in the Far North. The shoreline is taken from the OHN - Waterbody data class. This data is used for cartographic purposes and web mapping services. This product requires the use of geographic information system (GIS) software. [Ontario Hydro Network (OHN) User Guide (Word)](https://www.sdc.gov.on.ca/sites/MNRF-PublicDocs/EN/CMID/OHN%20-%20UserGuide.docx)

The Wastewater Systems Effluent Regulations (WSER), developed under the Fisheries Act, came into force in 2012 to manage wastewater releases by systems that collect an average daily influent volume of 100 cubic metres or more. The WSER also does not apply to any wastewater system located in the Northwest Territories, Nunavut and north of the 54th parallel in the provinces of Quebec and Newfoundland and Labrador. The WSER set national baseline effluent quality standards that are achievable through secondary wastewater treatment. Under the WSER, owners or operators of wastewater systems discharging annual average daily effluent volumes greater than 2,500 m3 are required to determine and report on the acute lethality of the effluent.The map below presents the percentage of acute lethality test failures for the wastewater systems in Canada that conducted at least one acute lethality test according to the standards of the Wastewater Systems Effluent Regulations. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting wastewater systems, datasets are available in either Excel or CSV formats.Data from Quebec and YukonAs of 2018, no acute lethality results from Quebec municipalities are available since an equivalency agreement is now in effect. As of 2015, no acute lethality test results for wastewater systems in the Yukon are available as an equivalency agreement in is effect.More information on the wastewater sector including the regulations, agreements, contacts and resource documents is available at: https://www.canada.ca/wastewater

The Versatile Soil Moisture Budget (VSMB) is a soil water budget model that is continuous and deterministic in nature and was developed by AAFC. It is based on the premise that the water available for plant growth is gained by precipitation or irrigation, and lost through evapotranspiration and runoff as well as lateral and deep drainage. The daily net loss or gain is added or subtracted from the water already present in the rooting zone. Water is withdrawn simultaneously, but at different rates, from different soil depths, depending on the potential evapotranspiration, the stage of crop development, the water release characteristics of each soil layer and the available water.

This dataset includes water chemistry data collected from five of the six lakes as part of the Northwestern Ontario Size Series project in 1987 and 1990 including species of nitrogen and phosphorus, carbon, chlorophyll a, conductivity, soluble reactive silica, chloride, sulphate, conductivity, sodium, potassium, magnesium, calcium, pH, alkalinity and organic acids

Patterns of wet deposition of the nitrate (NO3), non-sea-salt sulfate (xSO4) and ammonium (NH4) ions across areas of Canada and the United States are based on measurements of precipitation depth and ion concentrations in precipitation samples. xSO4 refers to the wet deposition of sulfate with the sea-salt sulfate contribution removed at coastal sites. These measurements were collected and quality controlled by their respective networks: in Canada, the federal Canadian Air and Precipitation Monitoring Network (CAPMoN) and provincial or territorial networks in Alberta, New Brunswick, the Northwest Territories, Nova Scotia, Ontario and Quebec. In the United States, wet deposition measurements were made by two coordinated networks: the National Atmospheric Deposition Program (NADP) / National Trends Network (NTN) and the NADP/Atmospheric Integrated Research Monitoring Network (AIRMoN). Only data from sites that were designated as regionally representative were used in the mapping. Wet deposition amounts were interpolated by ordinary kriging using ArcMap Geostatistical Analyst. The map is limited to the contiguous U.S. and southeastern or southern Canada because outside that region, the interpolation error exceeds 30% due to the larger distances between stations. Links to annual and five-year average maps are available in the associated resources.

The Wastewater Systems Effluent Regulations (WSER), developed under the Fisheries Act, came into force in 2012 to manage wastewater releases by systems that collect an average daily influent volume of 100 cubic metres or more. The WSER also does not apply to any wastewater system located in the Northwest Territories, Nunavut and north of the 54th parallel in the provinces of Quebec and Newfoundland and Labrador. The WSER set national baseline effluent quality standards that are achievable through secondary wastewater treatment. The WSER require owners or operators of wastewater systems with combined sewers to submit an annual report on the total volume and the number of days wastewater is discharged per month via combined sewer overflow (CSO) points as a result of precipitation.The map below shows the volume of effluent (in cubic metres) discharged in a year from all CSO points situated within the collection area of a wastewater system. For the most part, the volumes provided to ECCC are estimates.Please note, a value of “999999999” in the dataset indicates that the volume data is unavailable and it does not mean that a volume of 999,999,999 m3 was released within the collection area of a wastewater system.The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting wastewater systems, datasets are available in either CSV or XLS formats.Data from QuebecAs of 2018, no combined sewer overflow volumes from Quebec municipalities are available since an equivalency agreement is now in effect.More information on the wastewater sector including the regulations, agreements, contacts and resource documents is available at: https://www.canada.ca/wastewater