The Canadian Nuclear Safety Commission (CNSC) is publishing a database with environmental monitoring results collected as part of the Eastern Athabasca Regional Monitoring Program. The samples are collected near communities located in northern Saskatchewan.

This dataset was developed for inclusion in EXTECH IV Athabasca uranium multidisciplinary study project geoscience database.This dataset was developed for inclusion in the EXTECH IV Athabasca uranium multidisciplinary study project geoscience database. It includes the Athabasca Basin paleocurrent directions and was compiled from paper field data sheets. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule. 

This dataset represents lithogeochemistry of Saskatchewan samples.This dataset represents lithogeochemistry of Saskatchewan samples. This dataset represents the exhaustive mapping and sampling program of the Athabasca Group between 1975 and 1981 by the Saskatchewan Geological Survey (SGS), the results of which are contained in Ramaekers (1990). These samples are now stored at the Ministry of Energy and Resources, Subsurface Geological Laboratory in Regina, Saskatchewan. A selection of these samples was chosen to help characterize the background geochemical signature of the Athabasca Group and to identify anomalous regions. A total of 837 samples were chosen. All samples in this data set were processed at the Geoanalytical Laboratories at the Saskatchewan Research Council (SRC) in Saskatoon, Saskatchewan, an ISO/IEC 17025:2005 certified facility (i.e., meets the General Requirements for the Competence of Mineral Testing and Calibration Laboratories). Samples were crushed, split, agate ground, and then run with Sandstone Exploration Package ICPMS 1. The package produces three separate analysis types: inductively coupled plasma mass spectroscopy (ICP MS) partial digestion for trace elements; ICP MS total digestion for trace elements; and ICP–Optical Emission Spectrometry (ICP–OES) total digestion for major and minor elements. Details and detection limits are available on the SRC’s website. ICP total digestion: a 0.250 g pulp is gently heated in a mixture of ultrapure HF/HNO3/HClO4until dry and the residue dissolved in dilute ultrapure HNO3; ICP MS total digestion: a 0.250 g pulp is gently heated in a mixture of ultrapure HF/HNO3/HClO4until dry and the residue dissolved in dilute ultrapure HNO3; ICP MS partial digestion: a 2.00 g pulp is digested with 2.25 ml of 8:1 ultrapure HNO3:HCl for 1 hour at 95° C; Detection limits are from the SRC's 2011 Analytical Fee Schedule; null values indicate that elements are below the detection limit. NOTE: Attribute data headings ending with TD indicate Total Digestion, those ending with PD indicate Partial Digestion. Majors oxides are in percent; all other elements are in ppm. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule. 

This dataset represents the interpreted Magnetic Domains of the Province of Saskatchewan.This dataset represents the interpreted Magnetic Domains of the Province of Saskatchewan. Regions of like magnetic intensity and/or structural texture have been interpreted from new aeromagnetic data collected for the Athabasca Basin and surrounding environs. Interpretations were made using a variety of presentations of the primary data including total magnetic intensity (TMI), 1st vertical derivative of TMI, horizontal derivative of TMI, automatic gain control of TMI and tilt derivative. Where possible, the interpreted domains extend the aeromagnetic response from older rocks that flank the basin beneath rocks of the Athabasca Group. The data was created as a file geodatabase feature class and output for public distribution.  **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule.

Locations of uraniferous boulders fields and uraniferous swamps extracted from industry assessment reports are useful metallogenetic indicators for uranium exploration within and around the Athabasca Basin. They are used as pathfinders to uranium occurrences and prospects. These locations along the northern rim of the Athabasca Basin in Alberta have been compiled in GIS format and delivered as a polygon shapefile. In Alberta, the northern rim of the Athabasca Basin and the regolith underlying the Athabasca unconformity are locally exposed along the northern shore of Lake Athabasca. Extensive uranium exploration work in the 1970s, including scintillometer prospecting traverses, geological mapping, airborne and ground geophysics, and drilling, have documented several uraniferous outcrops with scintillometer readings of up to 10 000 counts per second, and uraniferous boulders and boulder trains with radioactivity up to two orders of magnitude higher than the background. Near the Alberta-Saskatchewan border, uraniferous boulders show geochemical characteristics consistent with a Saskatchewan source, whereas to the west boulders have a distinct geochemical signal suggesting a local source in Alberta.

Locations of uraniferous boulder-fields and uraniferous swamps extracted from industry assessment reports are useful metallogenetic indicators for uranium exploration within and around the Athabasca Basin. They are used as pathfinders to uranium occurrences and prospects. These locations along the northern rim of the Athabasca Basin in Alberta have been compiled in GIS format and delivered as a point shapefile. In Alberta, the northern rim of the Athabasca Basin and the regolith underlying the Athabasca unconformity are locally exposed along the northern shore of Lake Athabasca. Extensive uranium exploration work in the 1970s, including scintillometer prospecting traverses, geological mapping, airborne and ground geophysics, and drilling, have documented several uraniferous outcrops with scintillometer readings of up to 10 000 counts per second, and uraniferous boulders and boulder trains with radioactivity up to two orders of magnitude higher than the background. Near the Alberta-Saskatchewan border, uraniferous boulders show geochemical characteristics consistent with a Saskatchewan source, whereas to the west boulders have a distinct geochemical signal suggesting a local source in Alberta.

This GIS dataset is part of a digital compilation of the Precambrian geology of the Alberta portion of the Canadian Shield and Athabasca Basin. It is one of the datasets used to produce Alberta Geological Survey (AGS) Map 537. For the Alberta shield, the compilation integrates detailed mapping by both AGS and the Geological Survey of Canada (GSC) at scales ranging between 1:31,680 and 1:250,000. Geochronological data and interpretations also helped prepare this dataset. For the Athabasca Basin, the compilation incorporates the geology of the basin presented in the ExTech IV volume, published in 2007 by the GSC. This dataset tries to present the geological information in a neutral manner, unbiased by the three mutually exclusive, regional tectonic concepts existing at the time of compilation. Users are encouraged to view AGS Map 537, which contains overviews of the geology of the respective areas and a complete reference list. This line feature dataset came from existing, though largely unpublished, digital sources. Areas of the shield are mainly from digitized versions of AGS Maps 180 and 25: the shield north of Lake Athabasca and south of the Athabasca Basin, respectively.

####Leading Group for the Cariboo Region (pinegroup or firgroup). #### 1. IDF - Fir Group: includes all forest polygons in NDT 4 (IDF and BG biogeoclimatic zones) that meet any of the following criteria: *a) Douglas-fir ( Fd or Fdi) leading or ponderosa pine leading; *b) Lodgepole pine leading, and Douglas-fir ( Fd or Fdi) or ponderosa pine greater than 15% in any inventory layer; *c) Trembling aspen leading, and Douglas-fir ( Fd or Fdi) or Ponderosa pine greater than 15% in any inventory layer, and spruce, red-cedar, cottonwood and birch less than 6% in any inventory layer; *d) No species information in inventory data (usually NSR stands), and inventory type group for pre-harvest stand or the current stand = 1, 2, 3, 4, 5, 6, 7, 8, 29, or 32 These inventory type groups correspond to the following species compositions F, FC, FCy, FH, FS, FPl, Fpy, FL, FDEcid, PlF and Py. If inventory type group=0 and pre-harvest inventory type is not available, classify the polygon as Pine Group. 2. IDF-Pl Group: includes all forest polygons in NDT 4 (IDF and BG biogeoclimatic zones) that do not meet the above definition for IDF-Fir Group.

The Common Attribute Schema for Forest Resource Inventories (CASFRI) is a Canadian forest resource inventory data repository. Forest resource inventory datasets in CASFRI are harmonized to a common data model so that data collected by different agencies following different standards can be used together. Participating provincial, territorial and federal government departments and agencies share current and historical map-based forest resource inventory datasets through CASFRI so that their data are available to users who’s areas of interest span multiple jurisdictions. CASFRI was originally developed by academic researchers (Cumming et al., https://doi.org/10.1139/cjfr-2014-0102). This flavour of CASFRI (CASFRIv5) was developed anew in collaboration with academic researchers at the University of Laval to provide a government version of CASFRI that is findable, accessible, interoperable, and reusable. It uses the most up-to-date forest inventory data provided by participating provincial, territorial, and federal government departments and agencies. CASFRIv5 is hosted on the Canadian Council of Forest Ministers’ data portal, the National Forest Information System (http://nfis.org).

Orders in Council (OIC) are regulations or legislative orders in relation to and authorized by an existing Act. This table identifies Yukon lands withdrawn from disposal, usually by Territorial Order in Council. In Corporate Spatial Warehouse (CSW) data is split out into spatial views by Act under which orders are authorized. The tables are comprehensive and include both active and expired orders. Spatial views show only the active data.In this table and spatial views, Regulations by Order in Council (OIC) are spatially represented to provide clarity regarding Yukon lands withdrawn from disposal. Spatial data is viewed by the Act under which the order is authorized. Not all orders are for withdrawal, different levels of withdrawal are common and not detailed in GIS attributes. It is important to read OIC documents for specific details ( [https://legislation.yukon.ca/legislation/page_a.html](https://legislation.yukon.ca:443/legislation/page_a.html) ).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)