All named watershed polygons

This data is intended to identify Canadian fresh waters which require additional measures (e.g., ballast water exchange and treatment) prior to release, as described in https://tc.canada.ca/en/marine-transportation/marine-safety/list-canada-s-designated-alternate-ballast-water-exchange-area-fresh-waters-tp-13617e-2021. The data is not intended for navigation purposes.According to Canada’s Ballast Water Regulations, vessels which are managing ballast water to meet the ballast water performance standard cannot release ballast water into fresh waters unless that ballast water was first exchanged in accordance with the ballast water exchange standard. For the purpose of this requirement, Canadian fresh waters are the following:- the waters at the Port of Kitimat and waters in or upstream of the Kitimat Arm, east of a line between Hilton Point and Steel Point;- the waters at the Port of Stewart and waters in or upstream of the Portland Canal, north of a line between Portland Point and Ramsden Point;- the waters of all Fraser River ports that are: -- east of Tilbury Island in the main arm of the Fraser River including Annacis Island and New Westminster docking areas; and -- east of the eastern tip of Mitchell Island in the north arm of Fraser River;- the waters of the Saguenay River ports and waters upstream of L’Anse-Creuse;- the waters of all St. Lawrence River ports and waters west of the east point of Ile d’Orléans including the port of Quebec City;- all Canadian waters of the Great Lakes Basin; and- the waters of Happy Valley-Goose Bay and waters of Lake Melville west of Rabbit Island.Legal Constraints: Users should be aware that the polygons depicting areas requiring additional measures to manage ballast water are intended for illustration only and should not be used for navigational or legal purposes.

All bank edges (of rivers, lakes, and wetlands), delimiter edges, glacier edges, and administrative boundary edges. These are the linear features that makeup the polygonal waterbodies

Province-wide spatial view showing licensed water sources (streams and lakes), under the Water Act, (current and historical), not captured (displayed) on TRIM base mapping (or Freshwater Atlas base mapping).

Sea scallop (Placopecten magellanicus) and Iceland scallop (Chlamys islandica) concentration areas of this layer are described as being known and commercially exploited historically and/or currently. The mapping of these areas is based on several sources of information: research surveys (since 1977, annually but alternating sectors since 2009), exploratory fisheries (2000, 2001, 2003) and commercial fisheries (annually). These concentration areas are considered among the most abundant beds and are used for commercial fishing.This layer does not represent the general distribution of the species nor the extent to which fishing is allowed and does not take into account the large unexploited beds. The extent of shellfish beds can change over time in response to, among others, harvesting and recruitment rates. The polygons might underestimate the concentration areas because fishing and scientific surveys occurred where the target resource was known to be more abundant. However, the precision is good enough for resource protection and management needs in case of an environmental incident. This information is valid until data from a more recent research survey is published.Data sources and references:Bourdages, H. et Goudreau, P. 2010. Évaluation des stocks de pétoncles des eaux côtières du Québec en 2009 : données de la pêche commerciale. Secr. can. de consult. sci. du MPO. Doc. de rech. 2010/068. viii + 69 p. Giguère, M., Brulotte, S. et Goudreau, P. 2000. État des stocks de pétoncles des eaux côtières du Québec. Secr. can. de consult. sci. du MPO. Doc. de rech. 2000/086. xi + 46 p.Trottier, S., Bourdages, H., Goudreau, P et Brulotte, S. 2017. Évaluation des stocks de pétoncle des eaux côtières du Québec en 2015: données de la pêche commerciale, des relevés de recherche et des pêches exploratoires. Secr. can. de consult. sci. du MPO. Doc. de rech. 2017/037: xvi + 176 p.

Linear coastlines of BC, including mainland and marine islands. Lines are directionalized and connected. Attributes include a hierarchical key and route identifier

Water obstacles (rapids, falls, etc)

All manmade waterbodies, including reservoirs and canals, for the province

Assessment Watersheds are mesoscale aquatic units designed to replace the 3rd order 1:50K watersheds. Assessment Watersheds are based on groupings of fundamental watersheds using FWA watershed code and local code, with a target size of between 2,000ha and 10,000ha.

Named point features (both fresh and marine) such as points of land, etc. Point names included as an attribute