This dataset includes daily averages of solar irradiance on tilted surfaces for all of Canada based on the period of 1998 - 2022.Daily averages of solar irradiance are displayed on both a monthly and annual basis for ten different tilt and tracking methods relative to the ground (horizontal) and latitude of the location. The daily averages were derived from multi-year satellite-derived solar resource datasets at an hourly temporal resolution and gridded geospatial resolution of approximately 10 km by 10 km.The data can be used to further assess the potential of solar energy technologies in Canada, including solar photovoltaics (PV) for electricity and solar thermal for domestic hot water and space heating. Maps of solar resource potential in Canada – Data Format The data stored in these files includes the daily-average insolation on tilted surfaces in units of kW·hr/m² for a given period. Each band represents period, numbered in order: band 1 = Annual, band 2 = January, band 3 = February, ..., band 13 = December.The period of averaging is the year 1998-2022, inclusive.Four fixed tilted surfaces of 0° (horizontal), 30°, 60°, and 90° (vertical) relative to the horizontal plane:- fixed tilted surfaces of 0° (vertical) relative to the horizontal plane (H+ 00 S+00)- fixed tilted surfaces of 30° (vertical) relative to the horizontal plane (H+ 30 S+00)- fixed tilted surfaces of 60° (vertical) relative to the horizontal plane (H+ 60 S+00)- fixed tilted surfaces of 90° (vertical) relative to the horizontal plan (H+ 90 S+00)Three fixed tilted surfaces of 0°, +15°, and -15°, relative to the local latitude:- fixed tilted surfaces of 0° relative to the local latitude (L+00 S+00)- fixed tilted surfaces of +15°, relative to the local latitude (L+00 S+00)- fixed tilted surfaces of -15°, relative to the local latitude (L+00 S+00)- A two-axis tracking surface that follows the sun throughout the day (T+00 T+00)- A single-axis tracking surface with the axis aligned north-south, tracking the sun east to west (A+00_S+90)- A single-axis tracking surface with the axis aligned east-west, tracking the sun's elevation (A+00_S+00)

A tribal council is a grouping of First Nations with common interests who voluntarily joined together to provide services to member First Nations.The tribal council geographic location dataset contains the geographic location of all tribal councils in Canada as points as well as basic attributes data. Each tribal council point represents its address as it is registered in Indigenous and Northern Affairs Canada (INAC) Indian Government Support System (IGSS). A connection with the IGSS is in place to ensure that any update to the system is reflected in the attributes data associated with the geography of each tribal council. This dataset is Indigenous Services Canada (ISC) and Crown-Indigenous Relations and Northern Affairs Canada (CIRNAC) official source for Tribal Councils geographic location on maps.

The ASTER instrument that was launched onboard NASA’s Terra spacecraft in December 1999 has an along-track stereoscopic capability using two telescopes in its near infrared spectral band to acquire data from nadir and backward views. Over 1.2 million scenes (level-1A products) acquired between March 2000 and August 2008 were used to generate the ASTER Global DEM (ASTGTM) collection.  For more information on the ASTER Global DEM, please see the metadata link.

The ASTER instrument that was launched onboard NASA’s Terra spacecraft in December 1999 has an along-track stereoscopic capability using two telescopes in its near infrared spectral band to acquire data from nadir and backward views. Over 1.2 million scenes (level-1A products) acquired between March 2000 and August 2008 were used to generate the ASTER Global DEM (ASTGTM) collection.  For more information, please see the metadata link above.

The Indian Reserve dataset is comprised of all the polygons that represent Indian Reserves in Alberta and also includes their associated Bands/Nations and Tribal Council associations as described in the Canada First Nations Profile (https://fnp-ppn.aadnc-aandc.gc.ca/fnp/Main/Search/SearchRV.aspx?lang=eng). Indian Reserve lands are lands set aside for the exclusive use and benefits of the Bands/Nations to which it is assigned. The federal government has primary jurisdiction over these lands and the people living on them. A Band or First Nation is an administrative entity/governing body created by the Indian Act. A Band/Nation includes members of a First Nation or group for whom lands have been set apart, and for whom money is held by the Crown. Each First Nation has its own distinct culture, language, history, and governance structure. They are the primary decision-makers for their respective Indian Reserves and their members. The Government of Alberta recognizes certain nations as individuals that the Federal Government does not recognize. These Nation names will be formatted as 'Federally recognized community [Alberta Recognized Nation]'.A Tribal Council is a grouping of bands/Nations with common interests who voluntarily join together to provide advisory and/or program services to member bands. A First Nation may choose to affiliate with a Tribal Council to achieve shared goals in areas such as economic development, social services, education, or land management.

This collection is a legacy product that is no longer supported. It may not meet current government standards. Canada's Orthoimages 2005-2010 is the national medium-resolution imagery coverage of Canada. These digital raster data acquired by the Spot4 and Spot5 satellites comprise five spectral bands, namely: a panchromatic band having 10 m pixels and four multispectral bands having pixels of 20 m. These orthoimages were produced according to the 1983 North American Reference System (NAD83SCRS) according to the Universal Transverse Mercator (UTM) and Lambert Conformal Conic (LCC) mapping.The set of orthoimages was created with the most accurate control data available at the time of its creation: Landsat7 Imagery Control Points, National Road Network (NRN) ) and the Landsat7 Orthorectified Imagery.

This mosaic is calculated over the North American domain with a horizontal spatial resolution of 1 km. This mosaic therefore includes all the Canadian and American radars available in the network and which can reach a maximum of 180 contributing radars. To better represent precipitation over the different seasons, this mosaic renders in mm/h to represent rain and in cm/h to represent snow. For the two precipitation types (rain and snow), we use two different mathematical relationships to convert the reflectivity by rainfall rates (mm/h rain cm/h for snow). This is a hybrid mosaic from DPQPE (Dual-Pol Quantitative Precipitation Estimation) for S-Band radars. For the US Nexrad radars, ECCC uses the most similar product from the US Meteorological Service (NOAA). This product displays radar reflectivity converted into precipitation rates, using the same formulas as the Canadian radars.

The spatial representation for a Timber Supply Area or TSA Supply Block: A Timber Supply Area is a designated area established by the Ministry in order to practice sound, integrated, resource management principles to improve the allowable annual cuts. TSAs were originally defined by an established pattern of wood flow from management units to the primary timber-using industries. They are the primary unit for allowable annual cut (AAC) determination. A TSA Supply Block is a designated area within the TSA where the Ministry approves the allowable annual cuts

The Wildlife Management Unit Biologist Contact Boundaries dataset is comprised of all the polygons that represent the Wildlife Management Unit Biologist Contact Boundaries within the Province of Alberta. The dataset is to help determine which Biologist is responsible for each Wildlife Management Unit. Please refer to the metadata included with the data for full entity attribute information.

The Modern treaties (formerly known as the Post-1975 treaties) dataset contains geographic boundaries as well as basic attribute data representing signed agreements that were negotiated between Indigenous groups, the Government of Canada, and provincial and territorial governments after 1975. These boundaries represent the areas of Canada where Indigenous land rights and title have not been addressed by treaty or through other legal means. These boundaries represent the final result of a negotiated First Nation’s claimed area. These boundaries are usually not surveyed but help to delineate the geographic extent of the rights of Indigenous beneficiaries defined within the agreement. The Modern treaties dataset includes: 1) Overall Treaty Area (OTA) which is the broad area to which the agreement applies, often composed of the sum of the specific geographies defined within the treaty. 2) Treaty Settlement Lands that is wholly Indigenous-owned and forms part of the “land and cash” settlements that are integral to the treaty. This category belongs to the Department of Natural Resources Canada and can be found on the Open data website as ‘‘Aboriginal Lands’’ classified as ‘‘Land Claim’’. 3) Treaty-Specified Rights Areas which category pertains to areas (lands or waters) where specific rights, activities or responsibilities apply pursuant to the treaty. 4) Other Treaty-related Geography is the catch-all category for any remaining geographies that do not fit within the aforementioned categories but do form part of the OTA, such as lands or marine areas designated for conservation or for specific projects.For more information about Modern treaties, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100028574/1529354437231#chp4. The Modern treaties dataset is one of multiple datasets representing treaties and agreements between the Crown and Indigenous peoples. The Crown-Indigenous treaties and agreements geospatial datasets represent the geographic boundaries of the solemn agreements between the Crown and Indigenous peoples that set out promises, obligations and benefits for parties. The following datasets are also available: 1) The Historic treaties (formerly known as the Pre-1975 treaties) dataset, which represents most signed treaties that were negotiated between Indigenous peoples and the Crown between 1725 and 1929.2) The Indigenous agreements dataset, which represents established protocols in place for consultation processes, self-government agreements, and other signed agreements between Indigenous groups and the Crown which do not fall into the aforementioned categories.The Modern treaties dataset is Crown-Indigenous Relations and Northern Affairs Canada (CIRNAC) and Indigenous Services Canada (ISC)’s primary source for Modern treaties geographic boundaries on maps.This dataset can also be viewed in the Aboriginal and Treaty Rights Information System (ATRIS). This web-based system provides access to information to inform governments, industry and other interested parties in determining their consultation obligations and in carrying out their consultation research.For more information, visit https://www.rcaanc-cirnac.gc.ca/eng/1100100014686/1609421785838.