Watershed boundary delineated for Canada-BC hydrometric stations. Currently, watersheds were delineated using 1:50,000 scale boundaries in 1996, and many watersheds encompass entire drainages, instead of just the upstream watersheds. Note - Not yet available, but we are in the process of generating BC hydrometric station upstream watersheds using updated base data, using the following method: Within BC, watershed boundaries are based on the 1:20,000-scale Freshwater Atlas fundamental watersheds, and trimmed using the BC TRIM DEM used to approximate the height-of-land at the station locations. Outside of BC, but within Canada, watershed boundaries were approximated using Canada CDED DEM data for delineation (no "stream burning" was used) and some manual editing of boundaries was done to approximately match hydrology data after the fact. Within U.S.A., the USGS Watershed Boundary Dataset was used (at the best scale available for each drainage) to delineate the watershed boundary, with the watershed trimmed using the USGS National Elevation Dataset to approximate the height-of-land when necessary.

This theme includes the drainage areas of various watercourse monitoring stations (physicochemical and bacteriological, benthic organisms, diatoms, pesticides, etc.) carried out by the Ministry of the Environment, the Fight against Climate Change, Wildlife and Parks (MELCCFP) as well as lake catchments (MELCCFP) as well as lake catchments including the majority of lakes in the Voluntary Lake Monitoring Network (RSVL).The drainage area and the watershed represent the territory whose water flows to the sampling station or to the outlet of the lake. Boundaries are generated using a geographic information system (GIS) from topographic maps, numerical elevation models and flow models, and watershed boundaries produced by the Main Directorate of Water Expertise (DPEH).The drainage area and watershed are used to calculate the area drained upstream of the sampling station or lake, to characterize the drained territory (for example, to determine land use), and to meet specific mapping needs. The linked tables also provide compilations of land use according to three classifications to contextualize the various monitoring carried out at the stations. Note that the use of land outside Quebec, drainage areas and transboundary watersheds is not calculated and that the percentages in each category correspond to the Quebec area only.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This dataset includes all drainage culverts with a n opening diameter of less than 2 metres. Culverts with a diameter greater than 2 metres are defined as structural culverts and are not present in this dataset.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Drainage basins of Manitoba.Hydrologic drainage basins found within Manitoba. The Assiniboine River basin is divided to indicate the Shellmouth Reservoir subbasin, to better illustrate local impacts and conditions. Basin names are in English and French. 

Polygons delimiting the watershed group boundary, which is a collections of drainage areas. In-land groups will contain a single polygon, coastal groups may contain multiple polygons (one for each island)

Surface drainage features including rivers, streams, lakes, islands, and watershed boundaries including names for many rivers and streams. Individual components of this dataset can be found on DNRED’s Open Data Catalogue. Those individual components may be more up-to-date than those used in this packaged dataset.

The Drainage Areas dataset is largely based on the Water Survey of Canada (WSC) drainage area boundaries at the sub-sub-basin level. The data model supports the derivation, from the Fundamental Drainage Areas dataset (sub-sub-basin level), of the WSC and Atlas of Canada drainage area hierarchies and the data is available in all three schemes. Drainage area definitions for both WSC and Atlas of Canada boundaries were reviewed resulting in some modifications. Larger scale reference data sources were used for further manual boundary adjustments. This dataset has been integrated with other National Scale Frameworks hydrology datasets and is considered a component of the Hydrology Theme (see Supplemental Information for more details about the Atlas of Canada National Frameworks data at the 1:1,000,000 scale).The Atlas Frameworks are a set of integrated base map layers which form part of a larger National-Scale Frameworks data collection. These data have been compiled at a scale of 1:1 000 000 with the primary goal being to indicate correct relative positioning with other framework layers rather than absolute positional accuracy.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Major Drainage Areas (MDA), as portrayed in this map, are part of the Standard Drainage Area Classification (SDAC) which was developed by Natural Resources Canada, in partnership with Statistics Canada, and Environment and Climate Change Canada.A drainage area, as opposed to a drainage basin or watershed, is a unit of statistical aggregation used for reporting purposes based upon drainage patterns and the underlying basins, delimited by a drainage divide.A drainage basin, sometimes called a watershed, is an area where all surface water shares the same drainage outlet. Surface water consists of water flowing on the surface of the earth that develops into larger streams and eventually combines to form a river.The 11 MDAs presented in this map comprise the uppermost level in the drainage area classification system which then divides into 164 sub-drainage areas, and then is further divided into 974 sub-sub-drainage areas. Relief was derived from the merging of two raster data sets, both resampled to 804 metre resolution:- High Resolution Digital Elevation Model (HRDEM) – CanElevation Series- Canadian Digital Elevation Model, 1945-2011Further information on all these maps can be found on the Atlas of Canada web site atlas.gc.ca.

This collection represents the authoritative watershed boundaries for Ontario. The data is based on a framework similar to the [Atlas of Canada Fundamental Drainage Areas](https://open.canada.ca/data/en/dataset/a4b190fe-e090-4e6d-881e-b87956c07977) and the [United States Watershed Boundary Dataset](https://www.usgs.gov/core-science-systems/ngp/national-hydrography/watershed-boundary-dataset?qt-science_support_page_related_con=4#qt-science_support_page_related_con), however it adopts a more stringent scientific approach to watershed delineation. The Ontario Watershed Boundaries (OWB) collection includes five data classes: * OWB main: all levels from primary to quaternary and 5th and 6th levels in select areas * OWB primary: all primary watersheds or major drainage areas in the Canadian classification * OWB secondary: all secondary watersheds or sub drainage areas * OWB tertiary: all tertiary watersheds or sub sub drainage areas * OWB quaternary: all quaternary watersheds or 6-digit drainage areas. The OWB data replaces the following data classes: * [Provincial Watersheds, Historical](https://data.ontario.ca/dataset/provincial-watersheds-historical)

A polygon coverage showing the location of coalfields with coalbed methane (cbm) potential in BC