Canadian tides and water level station information, benchmarks, observed water level data, and tidal predictions.The Canadian tide and water level data archive presently holds water level observations reported from over a thousand stations, with the earliest dating back to 1848. The number of observations spans on average 6 years per station, with 60 stations measuring water levels for over 50 years.Over 800 stations are subjected to appreciable effect of tides, and for most of these stations, the Canadian Hydrographic Service (CHS) calculates and publishes predictions of the water levels associated with the vertical movement of the tide.Observations from the CHS Permanent Water Level Network are added on a daily to monthly basis. Data are also exchanged annually with the Water Survey of Canada.Each point in the map represents a station with links to observations, tidal predictions, and benchmark information, where available.

Each pixel value corresponds to the difference (anomaly) between the mean “Best-Quality” Max-NDVI of the week specified (e.g. Week 18, 2000-2014) and the “Best-Quality” Max-NDVI of the same week in a specific year (e.g. Week 18, 2015). Max-NDVI anomalies < 0 indicate where weekly Max-NDVI is lower than normal. Anomalies > 0 indicate where weekly Max-NDVI is higher than normal. Anomalies close to 0 indicate where weekly Max-NDVI is similar to normal.

Forest Elevation(Ht) Stddev 2015Standard deviation of height of lidar first returns (m). Represents the variability in canopy heights. Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

This data publication contains a set of 30m resolution raster files representing 2020 Canadian wall-to-wall maps of broad land cover type, forest canopy height, degree of crown closure and aboveground tree biomass, along with species composition of several major tree species. The Spatialized CAnadian National Forest Inventory data product (SCANFI) was developed using the newly updated National Forest Inventory photo-plot dataset, which consists of a regular sample grid of photo-interpreted high-resolution imagery covering all of Canada’s non-arctic landmass. SCANFI was produced using temporally harmonized summer and winter Landsat spectral imagery along with hundreds of tile-level regional models based on a novel k-nearest neighbours and random forest imputation method. A full description of all methods and validation analyses can be found in Guindon et al. (2024). As the Arctic ecozones are outside NFI’s covered areas, the vegetation attributes in these regions were predicted using a single random forest model. The vegetation attributes in these arctic areas could not be rigorously validated. The raster file « SCANFI_aux_arcticExtrapolationArea.tif » identifies these zones.SCANFI is not meant to replace nor ignore provincial inventories which could include better and more regularly updated inputs, training data and local knowledge. Instead, SCANFI was developed to provide a current, spatially-explicit estimate of forest attributes, using a consistent data source and methodology across all provincial boundaries and territories. SCANFI is the first coherent 30m Canadian wall-to-wall map of tree structure and species composition and opens novel opportunities for a plethora of studies in a number of areas, such as forest economics, fire science and ecology.# Limitations1- The spectral disturbances of some areas disturbed by pests are not comprehensively represented in the training set, thus making it impossible to predict all defoliation cases. One such area, severely impacted by the recent eastern spruce budworm outbreak, is located on the North Shore of the St-Lawrence River. These forests are misrepresented in our training data, there is therefore an imprecision in our estimates.2- Attributes of open stand classes, namely shrub, herbs, rock and bryoid, are more difficult to estimate through the photointerpretation of aerial images. Therefore, these estimates could be less reliable than the forest attribute estimates.3- As reported in the manuscript, the uncertainty of tree species cover predictions is relatively high. This is particularly true for less abundant tree species, such as ponderosa pine and tamarack. The tree species layers are therefore suitable for regional and coarser scale studies. Also, the broadleaf proportion are slightly underestimated in this product version.4- Our validation indicates that the areas in Yukon exhibit a notably lower R2 value. Consequently, estimates within these regions are less dependable. 5- Urban areas and roads are classified as rock, according to the 2020 Agriculture and Agri-Food Canada land-use classification map. Even though those areas contain mostly buildings and infrastructure, they may also contain trees. Forested urban parks are usually classified as forested areas. Vegetation attributes are also predicted for forested areas in agricultural regions.Updates of this dataset will eventually be available on this metadata page.# Details on the product development and validation can be found in the following publication:Guindon, L., Manka, F., Correia, D.L.P., Villemaire, P., Smiley, B., Bernier, P., Gauthier, S., Beaudoin, A., Boucher, J., and Boulanger, Y. 2024. A new approach for Spatializing the Canadian National Forest Inventory (SCANFI) using Landsat dense time series. Can. J. For. Res. https://doi.org/10.1139/cjfr-2023-0118# Please cite this dataset as: Guindon L., Villemaire P., Correia D.L.P., Manka F., Lacarte S., Smiley B. 2023. SCANFI: Spatialized CAnadian National Forest Inventory data product. Natural Resources Canada, Canadian Forest Service, Laurentian Forestry Centre, Quebec, Canada. https://doi.org/10.23687/18e6a919-53fd-41ce-b4e2-44a9707c52dc # The following raster layers are available:• NFI land cover class values: Land cover classes include Water, Rock, Bryoid, Herbs, Shrub, Treed broadleaf, Treed mixed and Treed conifer• Aboveground tree biomass (tonnes/ha): biomass was derived from total merchantable volume estimates produced by provincial agencies• Height (meters): vegetation height• Crown closure (%): percentage of pixel covered by the tree canopy• Tree species cover (%): estimated as the proportion of the canopy covered by each tree species: o Balsam fir tree cover in percentage (Abies balsamea) o Black spruce tree cover in percentage (Picea mariana) o Douglas fir tree cover in percentage (Pseudotsuga menziesii) o Jack pine tree cover in percentage (Pinus banksiana) o Lodgepole pine tree cover in percentage (Pinus contorta) o Ponderosa pine tree cover in percentage (Pinus ponderosa) o Tamarack tree cover in percentage (Larix laricina) o White and red pine tree cover in percentage (Pinus strobus and Pinus resinosa) o Broadleaf tree cover in percentage (PrcB) o Other coniferous tree cover in percentage (PrcC)

The Sentinel mirror is maintained by the Government of Canada through the Copernicus collaborative ground segment program as well as EUMETSAT. Data is made available as quickly as possible based on Canada coverage availability at the source. **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

The Sentinel mirror is maintained by the Government of Canada through the Copernicus collaborative ground segment program as well as EUMETSAT. Data is made available as quickly as possible based on Canada coverage availability at the source. **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

The Sentinel mirror is maintained by the Government of Canada through the Copernicus collaborative ground segment program as well as EUMETSAT. Data is made available as quickly as possible based on Canada coverage availability at the source. **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

The Sentinel mirror is maintained by the Government of Canada through the Copernicus collaborative ground segment program as well as EUMETSAT. Data is made available as quickly as possible based on Canada coverage availability at the source. **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

The Sentinel mirror is maintained by the Government of Canada through the Copernicus collaborative ground segment program as well as EUMETSAT. Data is made available as quickly as possible based on Canada coverage availability at the source. **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

The Sentinel mirror is maintained by the Government of Canada through the Copernicus collaborative ground segment program as well as EUMETSAT. Data is made available as quickly as possible based on Canada coverage availability at the source. **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**