Home /Search
Search datasets
We have found 146 datasets for the keyword "benthic". You can continue exploring the search results in the list below.
Datasets: 104,195
Contributors: 42
Results
146 Datasets, Page 1 of 15
Benthic invertebrates in seagrass and bare soft sediments in Atlantic Nova Scotia
This dataset contains the abundance (per m²) and the biomass (mg dry per m²) of macrofauna (≥ 500µm) in eelgrass and adjacent bare soft sediments, collected at sites in the Atlantic of Nova Scotia from 2009 to 2013.Cite this data as: Wong M.C. Data of Benthic invertebrates in seagrass and bare soft sediments in Atlantic Nova Scotia Published May 2020. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/05d5f46a-7f19-11ea-8a4e-1860247f53e3Publications: Wong, M. C., & Dowd, M. (2021). Functional trait complementarity and dominance both determine benthic secondary production in temperate seagrass beds. Ecosphere. 12(11), e03794. https://doi.org/10.1002/ecs2.3794Wong, M. C. (2018). Secondary Production of Macrobenthic Communities in Seagrass (Zostera marina, Eelgrass) Beds and Bare Soft Sediments Across Differing Environmental Conditions in Atlantic Canada. Estuaries and Coasts, 41, 536–548. https://doi.org/10.1007/s12237-017-0286-2
Benthic Marine Ecounits - Coastal Resource Information Management System (CRIMS)
Benthic Marine Ecounits in coastal and offshore British Columbia. Benthic ecounits are intended to describe the sea bed and nearshore. Seven variables were selected to derive benthic ecounits: 1. Depth; 2. Slope; 3. Relief; 4. Temperature; 5. Exposure; 6. Current and 7. Substrate. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.
Benthos monitoring
The objective of benthos monitoring is to know the state of benthic macroinvertebrate communities in rivers according, in particular, to the composition of the substrate and the type of flow. Information on benthic macroinvertebrate samples collected at benthos monitoring stations is classified according to the benthos health index: iSBG for coarse-substrate streams and iSBM for soft-substrate streams. The Benthos Health Index (ISB) is a multimetric index based on benthic macroinvertebrates that assesses the biotic integrity of shallow streams. The benthos monitoring dataset includes a layer of sampling stations sampled between 2003 and 2023 and a layer of drainage areas for each of the types of substrate, either coarse or loose. The drainage area attribute table also provides a compilation of land use by category for the last year available at the time of data production, i.e. the year 2020.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**
Biodiversity Monitoring Stations for Benthic Macrofauna and Meiofauna in the Disko Fan and Hatton Basin Conservation Areas
In 2012 and 2013, Fisheries and Oceans Canada surveyed the benthos in two areas closed to bottom contact fishing, the Narwhal Overwintering and Coldwater Coral Zone (now the Disko Fan Conservation Area, DFCA), and the Hatton Basin Voluntary Coral Protection Zone (now the Hatton Basin Conservation Area, HBCA). Samples were collected following protocols recommended by the Arctic Council’s Circumpolar Biodiversity Monitoring Plan for the purposes of providing baseline data for future monitoring of benthic invertebrates in this sensitive region, and for facilitating pan-Arctic comparisons of benthic communities. Five biodiversity monitoring stations were established, four in the DFCA and one in the HBCA, each of which was fully sampled according to those protocols with Van Veen grabs or box corers, drop cameras and temperature recorders attached to the gear. This report summarises the grab/core-sampled benthic fauna collected during the 2012 survey of the Conservation Areas and complements another report documenting the epibenthos from the camera transects in the DFCA. Here we report on macrofauna in the 1-cm size fraction, and on foraminiferan meiofauna.The data provided is presented in the following report (see related link) :Jacobs, K., Bouchard Marmen, M., Rincón, B., MacDonald, B., Lirette, C., Gibb, O., Treble, M., and Kenchington, E. 2022. Biodiversity Monitoring Stations for Benthic Macrofauna and Meiofauna in the Disko Fan and Hatton Basin Conservation Areas. Can. Tech. Rep. Fish. Aquat. Sci. 3487: vi + 86 p.Cite this data as: Bouchard Marmen, Marieve; Rincon, Beatriz ; MacDonald, Barry; Lirette, Camille; Gibb, Olivia; Treble, Margaret ; Jacobs, Kevin; Kenchington, Ellen (2022). Biodiversity Monitoring Stations for Benthic Macrofauna and Meiofauna in the Disko Fan and Hatton Basin Conservation Areas. Published January 2023. Ocean Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/b7bcff18-698b-4d40-a7bd-13d39925cbeb
Benthic Habitat Mapping Database
The purpose of the survey is to document and record habitat types and associated algae and marine invertebrate species in a variety of habitat types. Transect locations are randomly selected throughout the study area, which rotates between the north and south coasts of British Columbia on a biannual basis. Transects are laid perpendicular to the shoreline. A team of two divers swim the transect with data sheets to collect habitat, algae and marine invertebrate data as detailed below in the methods section. Data is keypunched in an MS Access database that can be queried for species observations and environmental information.This dataset includes three tables pulled from the original database containing observations by species, observations by quadrat, and additional header information for each observation. All three tables can be linked by the field HKey. Three lookup tables are included as well, one for algae, one for invertebrates, and one for substrates.
Demersal fish and benthic invertebrate assemblages in the Northwest Atlantic
Marine classification schemes based on abiotic surrogates often inform regional marine conservation planning in lieu of detailed biological data. However, theses chemes may poorly represent ecologically relevant biological patterns required for effective design and management strategies. We used a community-level modeling approach to characterize and delineate representative mesoscale (tens to thousands of kilometers) assemblages of demersal fish and benthic invertebrates in the North-west Atlantic. Hierarchical clustering of species occurrence data from four regional annual multispecies trawl surveys revealed three to six groupings (predominant assemblage types) in each survey region, broadly associated with geomorphic and oceanographic features. Indicator analyses identified 3–34 emblematic taxa of each assemblage type. Random forest classifications accurately predicted assemblage dis-tributions from environmental covariates (AUC > 0.95) and identified thermal limits (annual minimum and maximum bottom temperatures) as important pre-dictors of distribution in each region. Using forecasted oceanographic conditions for the year 2075 and a regional classification model, we projected assemblage dis-tributions in the southernmost bioregion (Scotian Shelf-Bay of Fundy) under ahigh emissions climate scenario (RCP 8.5). Range expansions to the north eastare projected for assemblages associated with warmer and shallower waters of the Western Scotian Shelf over the 21st century as thermal habitat on the rela-tively cooler Eastern Scotian Shelf becomes more favorable. Community-level modeling provides a biotic-informed approach for identifying broadscale ecolog-ical structure required for the design and management of ecologically coherent, representative, well-connected networks of Marine Protected Areas. When com-bined with oceanographic forecasts, this modeling approach provides a spatial tool for assessing sensitivity and resilience to climate change, which can improve conservation planning, monitoring, and adaptive management.Cite this data as: O'Brien, J.M., Stanley, R.R.E., Jeffery, N.W., Heaslip, S.W., DiBacco, C., and Wang, Z. Demersal fish and benthic invertebrate assemblages in the Northwest Atlantic.Published: December 2024. Coastal Ecosystems Science Division, Maritimes region, Fisheries and Oceans Canada, Dartmouth NS.https://open.canada.ca/data/en/dataset/14d55ea5-b17d-478c-b9ee-6a7c04439d2b
Species Distribution Modelling of Corals and Sponges in the Maritimes Region for Use in the Identification of Significant Benthic Areas
Effective fisheries and habitat management processes require knowledge of the distribution of areas of high ecological or biological significance. On the Scotian Shelf and Slope, a number of benthic ecologically or biologically significant areas consisting of habitat-forming species such as sponges and deep-water corals have been identified. However, knowledge of their spatial distribution is largely based on targeted surveys that are limited in their spatial extent. We used a species distribution modelling approach called random forest (RF) to predict the probability of occurrence and biomass of sponges, sea pens, and large and small gorgonian corals across the entire spatial extent of Fisheries and Oceans Canada’s (DFO) Maritimes Region. We also modelled the rare sponge Vazella pourtalesi, which forms the largest known aggregation of its kind on the Scotian Shelf. We utilized a number of data sources including DFO multispecies trawl catch data and in situ benthic imagery observations. Most models had excellent predictive capacity with cross-validated Area Under the Receiver Operating Characteristic Curve (AUC) values ranging from 0.760 to 0.977. Areas of suitable habitat were identified for each taxon and were contrasted against their known distribution and when applicable, the location of closure areas designated for their protection. Generalized additive models (GAMs) were developed to predict the biomass distribution of each taxonomic group and serve as a comparison to the RF models. The RF and GAM models provided comparable results, although GAMs provided superior predictions of biomass along the continental slope for some taxonomic groups. In the absence of data observations, the results of this study could be used to identify the potential distribution of sensitive benthic taxa for use in fisheries and habitat management applications. These results could also be used to refine significant concentrations of these taxa as identified through the kernel density analyses.Cite this data as: Beazley, Lindsay; Kenchington, Ellen; Murillo-Perez, Javier; Lirette, Camille; Guijarro-Sabaniel, Javier; McMillan, Andrew; Knudby, Anders (2019). Species Distribution Modelling of Corals and Sponges in the Maritimes Region for Use in the Identification of Significant Benthic Areas. Published July 2023. Ocean Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/356e92f3-5bf3-4810-98b1-3e10cd7742aa
Biodiversity of the Benthic Epifauna Trawl Survey from CBS-MEA program (2021-2024)
This dataset documents the epifauna occurrences collected from 2021 to 2024 during the Canadian Beaufort Sea Marine Ecosystem Assessment (CBS-MEA) conducted by the Department of Fisheries and Oceans (DFO). This scientific program focuses on the integration of oceanography, food web linkages, physical-biological couplings, and spatial and interannual variabilities. The program also aims to expand the baseline coverage of species diversity, abundances, and habitat associations in previously unstudied areas of the Beaufort Sea and Western Canadian Archipelago. The study took place mainly in the Canadian Beaufort Sea and the Amundsen Gulf. Sampling is done along transects at fixed stations in the study area. Catches are collected with a 3 m benthic beam trawl for 10 minutes bottom-contact time at a target speed of 2 knots and with a modified Atlantic Western IIA otter trawl for 20 minutes bottom-contact time at a target speed of 2.9 knots. A total of 32 stations were sampled for epifauna in 2021, 22 in 2022, 23 in 2023 and 22 in 2024, between 22-655 m depth. Epibenthic invertebrates were identified to the lowest taxonomic level possible and photographed. All unknown specimens are frozen. In the lab, the identifications are validated or refined with the photos and the frozen specimens.The data are presented in Darwin Core and are separated in two files:The "Activité_épifaune_CBSMEA_epifauna_event_en" file which contains information about missions, stations and deployments, which are presented under a hierarchical activity structure.The "Occurrence_épifaune_CBSMEA_epifauna_en" file that contains the taxonomic occurrences.
Inventory of macroalgae and benthic macroinvertebrates on the north shore of the Saint-Lawrence Estuary (2019)
This inventory, conducted from September 26th to October 3th, 2019, aimed to describe the community structure of macroalgae and benthic macroinvertebrates of five small estuaries of the Upper North Shore of Quebec, namely Barthélemy Bay and the Colombier, Mistassini, Franquelin and Saint-Nicolas rivers. This inventory is part of a doctoral study of Valentine Loiseau on the global changes in the St. Lawrence system, mainly the study of marine benthic communities in response to changes of salinity, to ensure proper management of the environment in the face of future changes. The main objective is to describe the structure and the levels of specific diversities of mediolittoral communities of benthic macroinvertebrates and macroalgae along a salinity gradient. These five small estuaries were selected because of their similar size, hard substrates and easy access. Three levels of hypoosmotic stress (low, medium, high) and one control level (seawater) were used for each of the selected estuaries, with eight quadrats per stress level. Quadrat positions were randomly selected but had to meet two criteria: (1) regular height in the foreshore to control the influence of other stresses (temperature, exposure); and (2) presence of at least one macroalga to maintain homogeneity. A percentage cover by macroalgal and macroinvertebrate species was estimated, and then all organisms were weighed by species and size group. The salinity of the nearest water point was measured at mid-tide with a portable refractometer and a Castaway-type CTD (Conductivity-Temperature-Density) probe. The inventory was done using a stratified random sampling design and the sampling unit was a quadrat measuring 25 x 25 cm. The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes the generic information of the quadrat, including date and location. The "additional_information_event_and_occurrence" file includes salinity and substrate type of the quadrat, as well as the total weight of all individuals of the same species caught in the quadrat extrapolated to one square metre of surface. For nudibranchs and barnacles, weight was estimated from the size of the individuals so that they were not removed from the environment. The "taxon_occurrence" file includes the taxonomic inventory of macroalgal and benthic macroinvertebrate species observed in the quadrat, identified to the lowest possible species or taxonomic level and biomass by identified species.For quality control, organisms were identified on the field using the following guide: Chabot, Robert et Anne Rossignol. 2003. Algues et faune du littoral du Saint-Laurent maritime : Guide d'identification. Institut des Sciences de la mer de Rimouski, Rimouski ; Pêches et Océans Canada (Institut Maurice-Lamontagne), Mont-Joli. 113 pages. The taxonomy was checked against the World Register of Marine Species (WoRMS) to match recognized standards and using the R obistools and worrms libraries. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. All sample locations were spatially validated. This project was funded by DFO Coastal Environmental Baseline Program under Canada’s Oceans Protection Plan. This initiative aims to acquire environmental baseline data contributing to the characterization of important coastal areas and to support evidence-based assessments and management decisions for preserving marine ecosystems.
Coastal biodiversity of the benthic epifauna of the St. Lawrence Estuary (2018-2019)
The North Shore of the Lower Estuary (Upper North Shore, Quebec) is a productive coastal system where many commercial species of benthic invertebrates are fished in the infralittoral (10-20 m) and circalittoral (20-50 m) zone. However, little data exist on the biodiversity of non-commercial species and the environmental characteristics of the benthic habitat in this area. Two scientific surveys were conducted in 2018 and 2019 to address this knowledge gap by developing a framework of biodiversity and environmental (water column and seafloor) data taking that will be used to determine the baseline state of the benthic ecosystem in this region.Surveys were conducted in 2018 (August 11-14) and 2019 (July 30-August 5) in the Upper North Shore region (between the towns of Forestville and Godbout). Surveys followed a fixed sampling design of eight transects perpendicular to bathymetry with stations at 10 m depth intervals in a bathymetry range of 10-50 m for a total of approximately 40 stations per survey. Specimens were collected with a beam trawl with an opening of 2.8 m. The hauls were made at a target speed of 2 knots and a target duration of 7 minutes. Start and end positions were recorded to calculate the distance traveled on each tow using the geosphere library of R. The average tow distance was approximately 425 m. The area covered at each tow was the product of the trawl opening and the distance traveled. The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes generic event information, including date and location. The "additional_information_event_and_occurrence" file includes sample size, sampling protocol and sampling effort, among others. The "taxon_occurrence" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. For abundance and biomass estimates, contact Virginie Roy (virginie.roy@dfo-mpo.gc.ca). For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. Special cases were noted in "identificationRemarks" and selected specimens were confirmed using field photos. Data quality checks were performed using the R obistools and worrms libraries. All sampling locations were spatially validated.This project was funded by DFO Coastal Environmental Baseline Program under Canada’s Oceans Protection Plan. This initiative aims to acquire environmental baseline data contributing to the characterization of important coastal areas and to support evidence-based assessments and management decisions for preserving marine ecosystems.
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and
topics that matter to you.
Please send us your feedback