The Canadian Aquatic Biomonitoring Network (CABIN) is an aquatic biomonitoring program for assessing the health of fresh water ecosystems in Canada. Benthic macroinvertebrates are collected at a site location and their counts are used as an indicator of the health of that water body. CABIN is based on the network of networks approach that promotes inter-agency collaboration and data-sharing to achieve consistent and comparable reporting on fresh water quality and aquatic ecosystem conditions in Canada. The program is maintained by Environment and Climate Change Canada (ECCC) to support the collection, assessment, reporting and distribution of biological monitoring information. A set of nationally standardized CABIN protocols are used for field collection, laboratory work, and analysis of biological monitoring data. A training program is available to certify participants in the standard protocols. There are two types of sites in the CABIN database (reference and test). Reference sites represent habitats that are closest to “natural” before any human impact. The data from reference sites are used to create reference models that CABIN partners use to evaluate their test sites in an approach known as the Reference Condition Approach (RCA). Using the RCA models, CABIN partners match their test sites to groups of reference sites on similar habitats and compare the observed macroinvertebrate communities. The extent of the differences between the test site communities and the reference site communities allows CABIN partners to estimate the severity of the impacts at those locations. CABIN samples have been collected since 1987 and are organized in the database by study (partner project). The data is delineated by the 11 major drainage areas (MDA) found in Canada and each one has a corresponding study, habitat and benthic invertebrate data file. Links to auxiliary water quality data are provided when available. Visits may be conducted at the same location over time with repeat site visits being identified by identical study name / site code with different dates. All data collected by the federal government is available on Open Data and more partners are adding their data continually. The csv files are updated monthly. Contact the CABIN study authority to request permission to access non open data.

Existing and Cancelled Trapline Cabin Sites within the Kootenay Region (qtrpcbr4).

The Ontario Forest Biomonitoring Network (OFBN) monitors the health of mixed hardwood forests across southern and central Ontario. The data set includes: * Individual Tree Data: Decline Index and other measurements of visual stress symptoms of each tree within 111 plots * Decline Index: The Decline Index is a weighted average of tree stress symptoms (percent dead branches, percent slight or strong chlorosis (pale green-yellow leaves) and percent undersized leaves). Averaged for hardwood trees found within each of the 111 plots in each year. * Invasive Plant Species Presence Data * Salamander Data: numbers of individuals of salamander and other animal species in 14 plots * Tree Regeneration Data: monitors numbers of tree seedlings/saplings in 102 plots * Woody Debris Data: amount of woody debris on ground in 102 plots

Cabin and back country camp sites located within Cascade, Cathedral and E.C. Manning Provincial Park

This feature delineates forest health disturbances which includes Abiotic and Biotic forest health agents in the Yukon at a scale of 1:100,000. It is a management level forest health overview survey (as opposed to an operational level) - meaning that analysis and mapping are most effective close to the 1:100,000 scale and not larger. This Forest Health Overview surveys has been completed in various stages: 1 ) Starting with mapping the disturbance type, and severity from the Air using Fix wing aircraft on to hardcopy 1:100,000 scale maps ; 2 ) Transfering the Data to a clean Mylar for scanning and digitizing ; and, 3 ) Scanning and digitizing and populate data into GIS spatial database .Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Forest Total Aboveground Biomass 2015Total aboveground biomass. Individual tree total aboveground biomass is calculated using species-specific equations. In the measured ground plots, aboveground biomass per hectare is calculated by summing the values of all trees within a plot and dividing by the area of the plot. Aboveground biomass may be separated into various biomass components (e.g. stem, bark, branches, foliage) (units = t/ha). Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

This publication contains thirteen (13) maps of different biogeochemical and soil properties of forest ecosystems of Canada’s managed forest. A scientific article gives additional details on the methodology: Paré, D., Manka, F., Barrette, J., Augustin, F., Beguin, J. 2021. Indicators of site sensitivity to the removal of forest harvest residues at the sub-continental scale: mapping, comparisons, and challenges. Ecol. Indicators. https://dx.doi.org/10.1016/j.ecolind.2021.107516

This theme presents the index of water health along the banks of the St. Lawrence River. It makes it possible to determine if the sites present risks to human health and if they are suitable for swimming.These data are the result of an exploratory monitoring program that aims to raise awareness among the population and local actors about the possible reopening of bathing sites that have good potential. This program also makes it possible to highlight any improvement in bacteriological quality resulting from the reduction of wastewater overflows during rainy weather or resulting from the installation of disinfection equipment.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The purpose of this study was to characterize the kelp bed at Batture-aux-Alouettes, a preferred food source for the green sea urchin (Strongylocentrotus droebachiensis). The green urchin is fished commercially in Quebec and the fishing effort is concentrated on the Batture-aux-Alouettes near Tadoussac, at the mouth of the Saguenay Fjord. The study was conducted in two separate phases in 2018 and 2019. The main objective of this study was to determine the abundance and biomass of the kelp bed at Batture-aux-Alouettes. The first phase, using a stratified random sampling design, was conducted from August 21th to August 24th, 2018. Sampling of two 50 x 50 cm quadrats, separated by a distance of approximately 30 m, was conducted at eleven sites during twelve dives in the eastern section of the Batture-aux-Alouettes to collect kelp for biomass estimation and macroalgal species richness assessment. In the second phase, a total of 429 stations were first sampled between July 15 and 18, 2019 with a camera system dropped in two 50 x 50 cm quadrats. The presence or absence of kelp, percent macroalgal cover, and substrate type were assessed for each photo. As a result of this underwater photographic analysis, 129 of these stations were identified as having a presence of kelp and 88 of these stations had a presence of other algal species. To ensure equal representation of the different depth strata, the stations with kelp were divided into three depth categories: shallow (-1.7 m to 0 m), medium (0 m to 2 m) and deep (2 m to 5 m). Dives were conducted from August 13 to 15, 2019, at ten of these stations using a stratified random sampling design, taking care to ensure a balanced spatial distribution as well as an equal distribution of the different depth strata (four in the shallow, three in the medium, and two in the deep). Sampling of the 50 x 50 cm dive quadrat took place at three different distances spaced 5 m apart from a transect, i.e. at the 3 m (_3m), 8 m (_8m) and 13 m (_13m) mark. If there was little or no kelp in the quadrat, the quadrat sampling could be repeated for up to four quadrats per distance for a total area of 1 m². Two additional quadrats were conducted (_x) at two stations. Biomass assessment was also done via "cookie cutter" sampling (_CC). Divers took the same 50 x 50 cm quadrat and placed it on a selected (i.e., non-random) plot with 100% kelp cover.The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes generic information about the event, such as date and location. The "additional_information_event_and_occurrence" file includes sample size, protocol and sampling effort. The "taxon_occurrence" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment of the kelp bed at Batture-aux-Alouettes, contact Rénald Belley (renald.belley@dfo-mpo.gc.ca).For quality control, the organisms were identified in the field fallowing the guide: Chabot, Robert et Anne Rossignol. 2003. Algues et faune du littoral du Saint-Laurent maritime : Guide d'identification. Institut des Sciences de la mer de Rimouski, Rimouski; Pêches et Océans Canada (Institut Maurice-Lamontagne), Mont-Joli. 113 pages. The taxonomy was checked against the World Register of Marine Species (WoRMS) to match recognized standards and using the R obistools and worrms libraries. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. All sample locations were spatially validated. This project was funded by DFO Coastal Environmental Baseline Program under Canada’s Oceans Protection Plan. This initiative aims to acquire environmental baseline data contributing to the characterization of important coastal areas and to support evidence-based assessments and management decisions for preserving marine ecosystems.

This feature class identifies active areas designated for personal use woodcutting where harvesting dead or downed fuelwood can occur for purposes such as home heating. Certain areas have seasonal restrictions or additional terms and conditions. A forest resources permit is required to cut in these areas; this free permit authorizes a limit of 25m 3 (11 cords) of firewood. Failure to have a permit or carry it with you when cutting could result in enforcement action.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)