Geotechnical data comes from investigations performed by geotechnical engineers to obtain information on the physical properties of soil and rock underlying a site for proposed structures. The investigations include surface exploration and subsurface exploration of a site. In addition, site investigations will often include subsurface sampling and laboratory testing of the soil samples retrieved. The digging of test pits and trenching may also be used to learn about soil conditions at depth. Geotechnical data is relevant to our permafrost database as it contains logs of ice encountered at various depths.Yukon Geological Survey has been compiling geotechnical data from various organizations and branches. The main datasets being compiled are the following:Northern Climate ExchangeCommunity Services, Land BranchEnergy Mines and Resources, Abandoned MinesTransportation Engineering BranchAlaska Highway Borehole DatabaseAgriculture soil profilesDistributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The BORHOLES layer represents the compilation of available data from various boreholes throughout the Yukon and near the Yukon border. This data set includes oil and gas exploration wells, mineral exploration boreholes, water supply wells and environmental monitoring well. The data points include information on the borehole location, purpose, status, depth, temperature data, water flow and chemistry data where available along with references where further detailed information may be available.

A borehole is a general term for any narrow shaft drilled in the ground, either vertically or horizontally. A borehole may be constructed for many different purposes, including: * extraction of water or fluid (e.g., oil) or gases (e.g., natural gas or methane) * for a geotechnical investigation * for an environmental site assessment * for mineral exploration * as a pilot hole for installing piers or underground utilities This data contains a continuous log of strata for each borehole as well as for geocolumns. A geocolumn is a collection of information from an examination of exposed substrate, such as in a quarry wall or along a roadway passage.

The Permafrost Information Network (PIN) geotechnical borehole database combines existing database compilations into a standard structure. The standardized database was created to be accessible from the PIN web application as a data layer. Further information regarding data compilation can be accessed from the PIN web application.

A digital grid of the top of the bedrock surface, originally modeled from borehole data and adjusted to present-day river erosion. The grid is generated at a 250 m cell-size resolution, based on information as recent as 2003.

Wildfire perimeters for the current fire season, including both active and inactive fires, supplied from various sources. The data is refreshed from operational systems every 15 min. These perimeters are rolled over to Historical Fire Polygons on April 1 of each year Wildfire data may not reflect the most current fire situation, and therefore should only be used for reference purposes. Wildfire data is refreshed when practicable and individual fire update frequency will vary. The information is intended for general purposes only and should not be relied on as accurate because fires are dynamic and circumstances may change quickly.

This dataset shows the boundaries of the province's six fire management zones that existed prior to 2014 in which most forest fires received the same type of response. These management zones were based on: * common forest and forest fire management objectives * land use * density of values at risk * fire load * forest ecology The 2014 Wildland Fire Management Strategy moved from a zone-based approach to one where each wildland fire is assessed and receives an appropriate response according to the circumstances and condition of the fire.

The fire regime describes the patterns of fire seasonality, frequency, size, spatial continuity, intensity, type (e.g., crown or surface fire) and severity in a particular area or ecosystem.Annual area burned is the average surface area burned annually in Canada by large fires (greater than 200 hectares (ha)). Changes in annual area burned were estimated using Homogeneous Fire Regime (HFR) zones. These zones represent areas where the fire regime is similar over a broad spatial scale (Boulanger et al. 2014). Such zonation is useful in identifying areas with unusual fire regimes that would have been overlooked if fires had been aggregated according to administrative and/or ecological classifications.Fire data comes from the Canadian National Fire Database covering 1959–1999 (for HFR zones building) and 1959-1995 (for model building). Multivariate Adaptive Regression Splines (MARS) modeling was used to relate monthly fire regime attributes with monthly climatic/fire-weather in each HFR zone. Future climatic data were simulated using the Canadian Earth System Model version 2 (CanESM2) and downscaled at a 10 Km resolution using ANUSPLIN for two different Representative Concentration Pathways (RCP). RCPs are different greenhouse gas concentration trajectories adopted by the Intergovernmental Panel on Climate Change (IPCC) for its fifth Assessment Report. RCP 2.6 (referred to as rapid emissions reductions) assumes that greenhouse gas concentrations peak between 2010-2020, with emissions declining thereafter. In the RCP 8.5 scenario (referred to as continued emissions increases) greenhouse gas concentrations continue to rise throughout the 21st century.Provided layer: projected annual area burned by large fires (>200 ha) across Canada for the short-term (2011-2040) under the RCP 8.5 (continued emissions increases).Reference: Boulanger, Y., Gauthier, S., et al. 2014. A refinement of models projecting future Canadian fire regimes using homogeneous fire regime zones. Canadian Journal of Forest Research 44, 365–376.

Wildfire location points for the current fire season. This includes both active and inactive fires. Data is supplied through various sources and is updated from the operational systems every 15 minutes. These points are rolled over to Historical Fire Points on April 1 of each year. Wildfire data may not reflect the most current fire situation, and therefore should only be used for reference purposes. Wildfire data is refreshed when practicable and individual fire update frequency will vary. The information is intended for general purposes only and should not be relied on as accurate because fires are dynamic and circumstances may change quickly.

Fire management zones help guide how wildfires are prioritized and managed and show where wildfires may be used to achieve ecological objectives. Zones are based on relatively constant factors, such as the level of human use or development and the presence of reliable fuel breaks.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)