Species characterization by environmental DNA (eDNA) is a method that allows the use of DNA released into the environment by organisms from various sources (secretions, faeces, gametes, tissues, etc.). It is a complementary tool to standard sampling methods for the identification of biodiversity. This project provides a list of invertebrates species whose DNA has been detected in water samples collected at 2018 using the marker COI.The surveys were carried out in the summer of 2018 from August 11 to 14, between Forestville and Godbout (Haute-Côte-Nord). Sampling was carried out between 9-52 meters depth in 40 stations with one sample par station. Two liters of water were filtered through a 1.2 µm fiberglass filter. DNA extractions were performed with the DNeasy Blood and Tissue extraction kit (Qiagen). Negative field, extraction and PCR controls were added at the different stages of the protocol. Libraries at the COI locus were prepared by Genome Quebec and sequenced on an Illumina MiSeq PE250 system. The bioinformatics analysis of the sequences obtained was carried out using an in-house analysis pipeline as reported in Bourret et al. 2022. A first step made it possible to obtain a molecular operational taxonomic unit table (MOTU) using the cutadapt software for the removal of the adapters and the DADA2 R package for the filtration, fusion, chimera removal and data compilation. The MOTUs table was subsequently corrected by taking into account the negative controls, where the number of observations in the latter was removed from the linked samples. Singleton MOTUs have also been removed. Finally, the taxonomic assignments were carried out on the MOTUs using the IDTAXA classifier (present in the DECIPHIER R package) using a training set trained on the COI reference bank for Golf St-Laurent (GSL-rl v1.0, https://github.com/GenomicsMLI-DFO/MLI_GSL-rl) and a threshold of 40. Detections with an “Unreliable due to gaps” category were reported at the genus level only.The file provided includes generic activity information, including site, station name, date, marker type, assignment types used for taxa identification, and a list of taxa or species. The list of taxa has been verified by a biodiversity expert from the Maurice-Lamontagne Institute.This project was funded by Fisheries and Oceans Canada's Coastal Environmental Baseline Data Program under the Oceans Protection Plan. This initiative aims to acquire baseline environmental data that contributes to the characterization of significant coastal areas and supports evidence-based assessments and management decisions to preserve marine ecosystems.Data are also available on SLGO platform : https://doi.org/10.26071/ogsl-cd4c205b-f63b

The Marine Biodiversity Observation Network Pole to Pole (MBON P2P) effort seeks to develop a framework for the collection, use and sharing of marine biodiversity data in a coordinated, standardized manner leveraging on existing infrastructure managed by the Global Ocean Observing System (GOOS; IOC-UNESCO), the GEO Biodiversity Observation Network (GEO BON), and the Ocean Biogeographic Information System (OBIS). The MBON Pole to Pole aims to become a key resource for decision-making and management of living resource across countries in the Americas for reporting requirements under the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services (IPBES), Aichi Targets of the Convention of Biological Diversity (CBD), and the UN 2030 Agenda for Sustainable Development Goals (SDGs).This collection corresponds to the species registered on rocky shores of the Musquash Harbour, Passamaquoddy Bay and Mispec Bay, New Brunswick, Canada, using the MBON P2P sampling protocol for rocky shores, with funding from the Government of Canada's Coastal Environmental Baseline Program.Citation: Reinhart B, Cooper A, Nason R, Jonah L (2025). MBON POLE TO POLE: ROCKY SHORE BIODIVERSITY OF MUSQUASH HARBOUR, PASSAMAQUODDY BAY AND MISPEC BAY. Version 1.7. Caribbean OBIS Node. Samplingevent dataset. https://ipt.iobis.org/mbon/resource?r=rockyshoresbayoffundynb&v=1.7

Orders in Council (OIC) are regulations or legislative orders in relation to and authorized by an existing Act. This table identifies Yukon lands withdrawn from disposal, usually by Territorial Order in Council. In Corporate Spatial Warehouse (CSW) data is split out into spatial views by Act under which orders are authorized. The tables are comprehensive and include both active and expired orders. Spatial views show only the active data.In this table and spatial views, Regulations by Order in Council (OIC) are spatially represented to provide clarity regarding Yukon lands withdrawn from disposal. Spatial data is viewed by the Act under which the order is authorized. Not all orders are for withdrawal, different levels of withdrawal are common and not detailed in GIS attributes. It is important to read OIC documents for specific details ( [https://legislation.yukon.ca/legislation/page_a.html](https://legislation.yukon.ca:443/legislation/page_a.html) ).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

A Conservation Unit (CU) is a group of wild Pacific salmon sufficiently isolated from other groups that, if extirpated, is very unlikely to recolonize naturally within an acceptable timeframe, such as a human lifetime or a specified number of salmon generations.Holtby and Ciruna (2007) provided a framework for aggregating the five species of salmon (genus Oncorhynchus) found on Canada’s Pacific coast into species-specific CUs based on three primary characteristics: ecotypology, life history and genetics. The first stage in the description of the Conservation Units is based solely on ecology. The ecotypologies used in this framework include a combined characterization of both freshwater and near-shore marine environments, and is termed “joint adaptive zone”. The second stage of the description involves the use of life history, molecular genetics, and further ecological characterizations to group and partition the first stage units into the final Conservation Units. The result is CUs that are described through the joint application of all three axes. It is important to note that CUs are distinct from other aggregates of Pacific salmon, such as designatable units (DUs) under the Species at Risk Act or management units (MUs).CU Counting Sites:Salmon spawner enumeration data in the Pacific Region is stored and managed in the New Salmon Escapement Database (NuSEDS). The term “escapement” is used to refer to the group of mature salmon that have ‘escaped’ from various sources of exploitation, and returned to freshwater to spawn and reproduce. This data is assigned to a “Counting Site”, which may be a complete watercourse with a marine terminus, a tributary to a larger watercourse, or a defined reach within a watercourse that may or may not encompass the entire population but represents an index of the abundance of that population. CU Status:CUs form the basic unit for assessment under Canada’s Policy for the Conservation of Wild Salmon Policy (WSP) (DFO 2005). The biological status of a CU is evaluated using a number of metrics (Holt et al. 2009; Holt 2009), which indicate a WSP status zone: Red (poor status), Amber (marginal status), or Green (healthy status). A final step then incorporates all metric and status-related information into a final integrated status for each CU, along with expert commentary to support the final status determination (e.g., DFO 2012; DFO 2016). This information is used as inputs to fisheries management processes to help prioritize assessment activities and management actions.Note: CU boundaries were reviewed in 2020-2021 and have been updated from the BC Freshwater Atlas 1:50,000 scale to the BC Freshwater Atlas 1:20,000 scale. The CU boundaries were last updated in March 2023. Please be aware that CUs may be reviewed and are subject to change without notice.Please refer to Conservation Unit Review Requests-Form and Summary for a list of CU review requests that are ongoing or have been finalized.

The RFI identifies areas of land and water encircling a recreation feature or combination of features that support, or have the potential to support, one or more recreation activities. These areas are rated for their significance or importance to recreation and for their sensitivity to alteration

Caribou habitat management areas identify zones ("tiers") with similar importance to caribou, potential risks and primary strategies for caribou conservation.These Final Caribou Habitat Management Areas (CHMAs) are based on known woodland caribou use and habitat potential mapping; in addition, levels of both human-caused and wildfire disturbances were also taken into consideration. Tier 1 areas were selected because they include high-moderate caribou habitat potential with high levels of observed caribou use and low levels of human-caused disturbance. Tier 2 areas were selected because they include areas of high-moderate woodland caribou habitat potential with observed use and higher levels of wildfire and human-caused disturbance. Tier 3 areas provide general habitat and maintain habitat connectivity between Tier 1 and Tier 2 areas. These areas are not permanent: they will be updated as habitat conditions, land use and caribou populations change over time. Different strategies have been developed for each Tier based on their stated management objectives and relative importance to and known use by caribou, current habitat condition and potential risks. A two page overview of the SK2 Central Woodland Caribou Range Plan and the CHMAs can be viewed here: https://publications.saskatchewan.ca/#/products/122353Find out more about woodland caribou and what the province is doing to manage their habitat and protect their populations: https://www.saskatchewan.ca/business/environmental-protection-and-sustainability/wildlife-and-conservation/wildlife-species-at-risk/woodland-caribou-program

####Leading Group for the Cariboo Region (pinegroup or firgroup). #### 1. IDF - Fir Group: includes all forest polygons in NDT 4 (IDF and BG biogeoclimatic zones) that meet any of the following criteria: *a) Douglas-fir ( Fd or Fdi) leading or ponderosa pine leading; *b) Lodgepole pine leading, and Douglas-fir ( Fd or Fdi) or ponderosa pine greater than 15% in any inventory layer; *c) Trembling aspen leading, and Douglas-fir ( Fd or Fdi) or Ponderosa pine greater than 15% in any inventory layer, and spruce, red-cedar, cottonwood and birch less than 6% in any inventory layer; *d) No species information in inventory data (usually NSR stands), and inventory type group for pre-harvest stand or the current stand = 1, 2, 3, 4, 5, 6, 7, 8, 29, or 32 These inventory type groups correspond to the following species compositions F, FC, FCy, FH, FS, FPl, Fpy, FL, FDEcid, PlF and Py. If inventory type group=0 and pre-harvest inventory type is not available, classify the polygon as Pine Group. 2. IDF-Pl Group: includes all forest polygons in NDT 4 (IDF and BG biogeoclimatic zones) that do not meet the above definition for IDF-Fir Group.

Orders in Council (OIC) are regulations or legislative orders in relation to and authorized by an existing Act. This table identifies Yukon lands withdrawn from disposal, usually by Territorial Order in Council. In Corporate Spatial Warehouse (CSW) data is split out into spatial views by Act under which orders are authorized. The tables are comprehensive and include both active and expired orders. Spatial views show only the active data.In this table and spatial views, Regulations by Order in Council (OIC) are spatially represented to provide clarity regarding Yukon lands withdrawn from disposal. Spatial data is viewed by the Act under which the order is authorized. Not all orders are for withdrawal, different levels of withdrawal are common and not detailed in GIS attributes. It is important to read OIC documents for specific details ( [https://legislation.yukon.ca/legislation/page_a.html](https://legislation.yukon.ca:443/legislation/page_a.html) ).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Map of the number of individuals in official language minority communities (according to first official language spoken, adjusted responses) by economic region. Multiple responses distributed equally among respondents. Data from 2016 Census of Canada, 100% sample.

A tribal council is a grouping of First Nations with common interests who voluntarily joined together to provide services to member First Nations.The tribal council geographic location dataset contains the geographic location of all tribal councils in Canada as points as well as basic attributes data. Each tribal council point represents its address as it is registered in Indigenous and Northern Affairs Canada (INAC) Indian Government Support System (IGSS). A connection with the IGSS is in place to ensure that any update to the system is reflected in the attributes data associated with the geography of each tribal council. This dataset is Indigenous Services Canada (ISC) and Crown-Indigenous Relations and Northern Affairs Canada (CIRNAC) official source for Tribal Councils geographic location on maps.