Represents timber supply area and other land use boundaries in the province of Saskatchewan. Timber supply areas are the primary management unit used for the allocation of timber harvest, licensing, forest management planning and harvest volume schedules.The Saskatchewan Ministry of Environment regulates forestry activities on Crown “forest lands” — as defined by The Forest Resources Management Act — using several types of licenses and permits:  Forest Management Agreement (FMA)A forest management agreement is a 20-year agreement, typically with a larger forest company, conferring long-term harvesting rights for a specific volume of timber from a defined area, as well as responsibilities for long-term sustainable forest management. Term Supply Licence (TSL)A term supply licence (TSL) is a licence with a term of up to 10 years, granting rights to harvest specified forest volumes as well as responsibilities for forest management. A TSL may be volume-based or area-based.  Forest Product Permit (FPP)A forest product permit grants the right to harvest specified forest products for a term of up to one year. This permit is also used to regulate other activities, such as grazing in the forest. Land use is classified into three categories:  Commercial ForestAreas within the provincial forest that are available for commercial timber harvest allocation through the use of forest management agreements (FMA), volume-based or area-based term supply licences (TSL), or forest product permits (FPP).  Fringe ForestAreas, generally south of the provincial forest, that contain “forest lands” — as defined by The Forest Resources Management Act. Within the fringe forest, harvest allocations are administered by the Ministry of Environment through the use of forest product permits and volume-based term supply licenses.  Other UsesAreas within the provincial forest that are not available or suitable for forestry activities. These include protected areas and areas generally north of the commercial forest.  For the entire Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests, and the southern portion of the Northern Provincial Forest, boundaries follow the textual descriptions found in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020. Commercial forest and fringe forest areas are sub-divided into timber supply areas. Forest Names and Licence Holders are current as of August 31, 2020.

The spatial representation for a Forest Addition, which is any Forest land that is to be designated by the Lieutenant Governor, into an established forest, to be managed and used for the social and economic benefit of the Province

The spatial representation for a Provincial Forest, which is any forest land that is designated by the Lieutenant Governor in council, to be managed and used for the social and economic benefit of the Province

This publication contains thirteen (13) maps of different biogeochemical and soil properties of forest ecosystems of Canada’s managed forest. A scientific article gives additional details on the methodology: Paré, D., Manka, F., Barrette, J., Augustin, F., Beguin, J. 2021. Indicators of site sensitivity to the removal of forest harvest residues at the sub-continental scale: mapping, comparisons, and challenges. Ecol. Indicators. https://dx.doi.org/10.1016/j.ecolind.2021.107516

This spatial data identifies breeding zones used by forest managers and forest genetic associations to manage provincial forest genetic assets. The data: * shows the boundaries of breeding zones * identifies the primary or target species within each zone Species are associated with certain breeding programs, seed orchards and progeny (descendant) testing installations.

The Forest Inventory Zone(s) (FIZ) were developed to provide a broadly based ecological classification of the forest land in British Columbia. FIZ closely follow the early biogeoclimatic zones developed by Dr. Krajina. The province of British Columbia is split into 12 FIZ zones.

Productive forest land base is defined as the total Crown forest area, determined by subtracting the following from the total area of the Cariboo Natural Resource Region: * All non-Crown land * All Crown land committed to non-timber use through a Land Act designation * All non-forest Crown Land, and * All forest area classified as brush or non-commercial cover in the Forest Inventory. See the CCLUP Land Use Order Implementation Direction for more information: https://www2.gov.bc.ca/assets/gov/farming-natural-resources-and-industry/natural-resource-use/land-water-use/crown-land/land-use-plans-and-objectives/cariboo-region/cariboochilcotin-rlup/cclup_land_use_order_implementation_direction_companion.pdf

This spatial data represents the boundaries of Manitoba's forest sections. Forest sections are administrative areas comprised of Forest Management Units (FMU's). There are 14 uniquely named forest sections in Manitoba, 9 of which are capable of growing commercial forests.Manitoba's f orest sections are administrative areas comprised of Forest Management Units (FMU's). There are 14 uniquely named forest sections in Manitoba, 9 of which are capable of growing commercial forests. The Aspen Parkland forest section in the south along with the northern forest sections of Boreal Shield, Taiga Shield, Hudson Plains and Southern Arctic are incapable of growing commercial forests. The four northern forest sections were previously called the 'white zone' and all have retained the previous white zone forest section number of 10. The northern forest section boundaries are based on the following ecozones:Hudson Plains: A subarctic area encompassing the coastal areas of Hudson Bay. The area is formed into a wide, level plain, characterised by poor drainage that has resulted in large and numerous peatlands, lakes, coastal marshes, and tidal flats. Alder, willow, black spruce, and tamarack are the most common tree species.Taiga Shield: Terrain is typically flat or with rolling hills caused by glacial retreat; long eskers and uplands are common. Shallow soils remain damp year-round and regularly freeze and thaw; this leads to tilted growing trees, sometimes called ‘drunken forests’. The northern edge of the forest section is delineated by the tree line. Black spruce, jack pine, birch, tamarack, white spruce, balsam fir, trembling aspen, and balsam poplar are common tree species.Southern Arctic: The southern boundary designated the tree line. Moraines, eskers, kettle lakes, and ponds are common. Permafrost occurs in a continuous sheet throughout the section; polygonal hummocks often result from the freeze and thaw of the soils.Boreal Shield : This forest section represents the upper boundary of the boreal shield ecozone, characterised by long, cold winters and warm summers. Permafrost is widespread. Uplands and lowland tree species are common. Soil varies from poorly drained muskeg to glacially-deposited sand. Coniferous trees include white and black spruce, balsam fir, jack pine, and tamarack; hardwood tree species include birch, trembling aspen, and balsam poplar. Forest fires and insect outbreaks are the natural drivers of forest succession. The ten forest sections south of forest section 10 are sometimes referred to as the 'green zone' and include the following: Pineland, Aspen Parkland, Mountain, Interlake, Lake Winnipeg East, Churchill, Nelson River, Hayes River, Saskatchewan River and Highrock. Fields Included: S ECTION : Forest section number . SECTION_NAME : Forest section name .

Geospatial forest inventory dataset updated for depletions, such as harvesting, and projected annually for growth. Sample attributes in this dataset include: age, species, volume, height. The Vegetation Resources Inventory (VRI) spatial datasets describe both where a vegetation resource (ie timber volume, tree species) is located and how much of a given resource is within an inventory unit. Suggested citation: Forest Analysis and Inventory Branch (2024). VRI - 2024 - Forest Vegetation Composite Rank 1 Layer (R1). British Columbia Data Catalogue. https://catalogue.data.gov.bc.ca/dataset/2ebb35d8-c82f-4a17-9c96-612ac3532d55

The purpose of this feature class is to identify those areas that are in the process of Timber Harvest Planning, process being a continuum from proposed plan through to approval and eventually plan expiration. Subsection 20(3) of the Forest Resources Act establishes that an approved Timber Harvest Plan is required prior to the authorization of timber harvesting under a Harvesting Licence or authorization of a Forest Resources Permit for non-commercial timber harvesting in an amount greater than 25m3 per year. A Timber Harvest Plan:• Must be developed in accordance with Sections 5 through 7 of the Forest Resources Regulation. • Identifies forest resources in the area and areas suitable for timber harvesting and establishes objectives for timber harvesting.• Must be consistent with any Forest Resources Management Plan that applies to the same area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)