The purpose of this feature class is to identify those areas that are in the process of Timber Harvest Planning, process being a continuum from proposed plan through to approval and eventually plan expiration. Subsection 20(3) of the Forest Resources Act establishes that an approved Timber Harvest Plan is required prior to the authorization of timber harvesting under a Harvesting Licence or authorization of a Forest Resources Permit for non-commercial timber harvesting in an amount greater than 25m3 per year. A Timber Harvest Plan:• Must be developed in accordance with Sections 5 through 7 of the Forest Resources Regulation. • Identifies forest resources in the area and areas suitable for timber harvesting and establishes objectives for timber harvesting.• Must be consistent with any Forest Resources Management Plan that applies to the same area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The data layer identifies areas of disturbance to vegetation including burns, commercial forestry harvesting (cuts), weather events, infrastructure and pest/disease. Instructions for downloading this dataset: This product requires the use of geographic information system (GIS) software.

Harbour seals (Phoca vitulina) are found along temperate and Arctic marine coastlines of the Northern Hemisphere. They are found in coastal waters of the northern Atlantic and Pacific Oceans, as well as those of the Baltic and North Seas. In Canada, they may be found off the coastal waters of British Columbia, Nunavut, Manitoba, Ontario, Quebec, New Brunswick, Prince Edward Island, Nova Scotia, and Newfoundland and Labrador.Population trends and abundance of harbour seals in British Columbia are assessed based on aerial surveys conducted during 1966-2019. Based on counts conducted in Index Areas distributed throughout the province, the trend observed in the Strait of Georgia appears to be generally indicative of harbour seal populations throughout British Columbia. Total abundance of harbour seals on the B.C. coast in 2008 was estimated to be on the order of about 105,000 (95% confidence interval of 90,900 to 118,900) seals. Total abundance was re-estimated in 2022 (estimate and CI pending completion of CSAS process). Historic reconstructions indicate the population was depleted by a period of commercial harvesting during 1879-1914, and subsequently maintained below natural levels by predator control programs until the early 1960s. Already depleted, the population could not sustain a second period of intense commercial harvesting during 1962-1968 and was further depleted, but now appears to have fully recovered.

This is a spatial layer that reflects operational activities for harvesting authorities. The harvesting authority is a legal area cleared by the Ministry of Forests and Range (that is, no other claims for the land exist) for harvesting purposes. This corresponds to the outlined areas on the Exhibit A maps. The Forest Tenures Section (FTS) is responsible for the creation and maintenance of digital Forest Atlas files for the province of British Columbia encompassing Forest and Range Act Tenures. It also supports the forest resources programs delivered by the MoFR. Each feature contains a Ministry of Forests and Range (MoFR) FEATURE_CLASS_SKEY (number) column that further defines the type of that feature. The layer contains harvesting authority boundaries for the following feature classes: Christmas Tree Permit (489), Forest Licence Cutting Permit (556), Licence to Cut (615), Timber Licence Cutting Permit (811), Timber Sale Licence Major Cutting Permit (818), Timber Sale Licence Minor (819), Tree Farm Licence Cutting Permit (834), WoodLot Licence Cutting Permit (864), Timber Sale Licence Minor Cutting Permit (917), and Community Forest Cutting Permit (2401). Each harvesting authority has a life cycle status code that is either PENDING - the harvesting authority has been submitted as a new harvesting authority or an amendment, but is not yet approved or rejected, ACTIVE - the harvesting authority is approved and activities may be taking place on the harvesting authority, or RETIRED - all activities have been completed for the harvesting authority

Distribution of clam beds in coastal Beds in British Columbia showing relative abundance (RA) and aboriginal, biological, commercial and recreational relative importance (RI) and overall RI. RI is based on project region and not on the province as a whole. and productivity. Other attributes include season dates, productivity and species. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

The Maritimes Region is divided into seven Clam Harvesting Areas (CHA).CLAM HARVESTING AREA 1 is described as follows:The inland and tidal waters of the counties of Colchester, Cumberland and Hants that border and flow into the Bay of Fundy.CLAM HARVESTING AREA 2 is described as follows:The inland and tidal waters of the counties of Annapolis, Digby and Kings.CLAM HARVESTING AREA 3 is described as follows:The inland and tidal waters of Yarmouth County.Time restrictions for Clam Harvesting Area 3: No person shall fish for clams from sunset each Saturday until sunrise on the following Monday (closed Sundays) in the boundaries of Clam Harvesting Area 3.CLAM HARVESTING AREA 4 is described as follows:The inland and tidal waters of the counties of Shelburne, Queens and Lunenburg and that portion of Halifax County west of Pennant Point (as defined in the Territorial Sea Geographical Coordinates Order (C.R.C., c. 1550), Schedule I, Area 4).CLAM HARVESTING AREA 5 is described as follows:The inland and tidal waters of Guysborough County and that portion of Halifax County east of Pennant Point (as defined in the Territorial Sea Geographical Coordinates Order (C.R.C., c. 1550), Schedule I, Area 4).CLAM HARVESTING AREA 6 is described as follows:The inland and tidal waters of the counties of Richmond and Cape Breton, all of Victoria County except that portion between Cape North and Inverness County and that portion of Inverness County that borders on the Bras d'Or Lakes.NEW BRUNSWICK - BAY OF FUNDY CLAM HARVESTING AREA 7 is described as follows:The inland and tidal waters of the counties of Charlotte, Saint John and Albert that flow into the Bay of Fundy.

Proxied dataset of inshore lobster commercial fishing for 2012 - 2021 in the Newfoundland and Labrador region. Only lobster harvested from the Newfoundland and Labrador region are included, based on species sought.Commercial data for the inshore lobster fishery does not require a set of coordinates be provided for catch records. With zero georeferenced inshore lobster records, the inshore lobster fishery leaves a major data gap in one of Newfoundland and Labradors largest fisheries. The Gulf region created a lobster proxy mapping tool, which associated each commercial lobster record with the most likely 10km2 hexagon grid cell based on a number of weighted variables. The tool was adopted by the Newfoundland and Labrador region and altered to work with its own variables which include human use, habitat, accessibility, area/location, home port distance, traditional ecological knowledge and depth. Each hexagon represents the summed total weight of all records associated with a particular hexagon.The best available commercial data used in this model is derived from landings data and may not include catches that have resulted in cash/wharf sales. As a result, there are some areas of Newfoundland and Labrador that may be under represented in this dataset where wharf sales may be high. Therefore, this dataset should be viewed as a general estimation on lobster harvesting patterns within Newfoundland and Labrador.

Defines areas protected from harvesting activities by Order-in-Council as per part 13 of the Forest Act.

The marks left in the seabed by the commercial anchoring process can be seen as linear features in high-resolution multibeam bathymetry data. These features have been digitized to polylines for individual marks and polygons for anchor scour zones for British Columbia's (BC) commercial anchorages. They are made available via the Federal Geospatial Platform (FGP) for use in a Geographical Information System (GIS). This feature dataset is complete for published BC commercial anchorages and the multibeam bathymetry data available in 2021. It does not represent features produced since the collection of each multibeam bathymetry survey nor any features infilled since. The data are intended to be used for scientific research to better understand the cumulative impacts to the seabed from commercial anchoring at a 1:5000 scale or greater.

Feature layer of Fish Shed locations (Fish Packing Stations) across Manitoba.This feature layer - which is used in the Manitoba Commercial Fishing Industry Map  and the Manitoba Commercial Fishing Industry Application - shows the Fish Shed locations (Fish Packing Stations) across Manitoba. This is a point layer that includes the name of the Fish Shed.