The locations of wells that have been drilled for oil production, gas or salt resources or for underground storage of hydrocarbons. This data can be used for land use and resource management, emergency management, as well as compliance and enforcement in the petroleum industry. The Data is collected on an on-going basis and maintained in the Ontario Petroleum Data System (OPDS).

This dataset represents points where address site data has been collected. These points are an amalgamation of different origin point data translated into a NG911-compliant schema using ESRI's Address Management Solution as a reference for compliance and data integrity.*This dataset requires extensive QA/QC and should not be used as an authoritative, source only for application-testing purposes*

The Wastewater Systems Effluent Regulations (WSER), developed under the Fisheries Act, came into force in 2012 to manage wastewater releases by systems that collect an average daily influent volume of 100 cubic metres or more. The WSER also does not apply to any wastewater system located in the Northwest Territories, Nunavut and north of the 54th parallel in the provinces of Quebec and Newfoundland and Labrador. The WSER set national baseline effluent quality standards that are achievable through secondary wastewater treatment. The map below presents data regarding compliance with the WSER effluent quality standards according to their averaging period. Wastewater systems must report on either a monthly, quarterly or annual basis. The dataset also includes the carbonaceous biochemical oxygen demand (CBOD) and suspended solids (SS) results for each wastewater system. Annual reporting: This map layer shows whether or not the wastewater systems met the WSER effluent quality limit according to an annual averaging period for carbonaceous biochemical oxygen demand CBOD or suspended solids SS. Quarterly reporting: This map layer shows whether or not the wastewater systems met the WSER effluent quality standards according to a quarterly averaging period. Note that a system that meets its CBOD limit or its SS limit for more than 75% of the time is considered to be in compliance with the effluent quality standards of the WSER.Monthly reporting: This map layer shows whether or not the wastewater systems met the WSER effluent quality standards according to a monthly averaging period. Note that a system that meets its CBOD limit or its SS limit for more than 75% of the time is considered to be in compliance with the effluent quality standards of the WSER.The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting wastewater systems, datasets are available in either CSV or XLS formats.Data from Quebec and YukonThe data for Quebec municipalities (after 2017) is provided to the department separately through the equivalency agreement that was finalized in October 2018. Beginning in 2015, the data reported for the Yukon is provided to the department separately through an equivalency agreement finalized in 2014.More information on the wastewater sector including the regulations, agreements, contacts and resource documents is available at: https://www.canada.ca/wastewater 

Table containing URL links to summary review reports on licensed personal care homes in Manitoba.This table contains URL links to reports on personal care home reviews completed by the Licensing and Compliance Branch of Manitoba Health, Seniors and Active Living. All licensed personal care home facilities in Manitoba are required to comply with minimum standards of care as set out in the Personal Care Home Standards Regulation under the Health Services Insurance Act. The branch monitors compliance through regular review processes. Operators of facilities are required to take the necessary steps to address concerns identified in the course of reviews within specified time lines and must provide status updates until concerns have been addressed.  Licences are reviewed and renewed annually and review findings are used to inform decision-making. The table includes the following fields (Alias (Name): Description) Regional Health Authority (Regional_Health_Authority): The name of the Regional Health Authority in which the facility is located. Community (Community): The name of the community in which the facility is located. Facility (Facility): The name of the licensed personal care home. Facility Key (Facility_Key): Primary key used to link this table with the feature point layer Licensed Personal Care Homes. Review Date (Review_Date): The date the review was conducted. Review Type (Review_Type): The type of review conducted. Possible values are Regular Standards, Unannounced, Modified, Pre-Opening, or Other. Summary Link (Summary_Link): The URL link to the report. This table forms part of the data for the Manitoba Personal Care Home Reporting app.

Feature point layer of the 124 licensed personal care homes (PCHs) in Manitoba.This is a feature point layer of the 124 licensed personal care homes (PCHs) in Manitoba. All licensed PCHs in Manitoba are required to comply with minimum standards of care as set out in the Personal Care Home Standards Regulation under the Health Services Insurance Act. The Licensing and Compliance Branch of Manitoba Health Seniors and Active Living monitors compliance through regular review processes. PCH operators are required to take the necessary steps to address concerns identified in the course of reviews within specified time lines and must provide status updates until concerns have been addressed. PCH licences are reviewed and renewed annually and review findings are used to inform decision-making.  The dataset includes the following fields (Alias (Name): Description)  Regional Health Authority (Regional_Health_Authority): The name of the Regional Health Authority in which the facility is located.  Community (Community): The name of the community in which the facility is located.  Facility (Facility): The name of the licensed personal care home.  Facility Key (Facility_Key): Primary key used to query records in the Summary Reviews table.  Facility Label (Facility_Label): An abbreviated facility name suitable for use as a label in a map.  Address (Address): The street address of the facility.  Postal Code (Postal_Code): The postal code for the facility.  Phone Number (Phone_Number): The phone number for the facility.  Proprietary Status (Proprietary_Status): Refers to the ownership of the facility, either Proprietary or Non-proprietary.  Language (Language): The designated language of the facility, either English or Bilingual.  Bed (Beds): The number of beds in the facility.  Status of Licence (Status_of_Licence): The status of the facility’s license. Possible values are Unencumbered, Under Review, or With Conditions.  Owner/Operator (Owner_Operator): The individual or company that owns the facility.  Website (Website): The URL for the website of the facility.  Latitude (Latitude): The latitudinal coordinate in decimal degrees.  Longitude (Longitude): The longitudinal coordinate in decimal degrees. This feature point layer forms part of the data for the Manitoba Personal Care Home Reporting app.

Temporary Protection Orders (TPOs) are ministerial orders that can be implemented to curtail water users during times of water scarcity to protect streamflow availability fish populations and the aquatic ecosystem. TPOs were implemented under Section 9 of the Fish Protection Act prior to 2016, but are now implemented under Section 86, 87 and 88 of the Water Sustainability Act. This dataset is a compilation of data hosted on TPOs to date across British Columbia and is maintained by the Watershed Stewardship and Security Branch within the Ministry of Water, Lands and Resource Stewardship. The purpose of the dataset is to communicate to water users when and where TPOs are/were in effect at the watershed scale. For specific details on which water users are affected by a TPO, please refer to the official Ministerial Order document referenced in the dataset.

The spatial representation for a Pulpwood Agreement, which is a 25 year term agreement, replaceable every ten years, that allows the holder of a wood-fibre processing facility to harvest Crown pulp timber if sufficient quantities of raw material are not available to the holder from other sources. Covers a large area in one or more Timber Supply Areas or TFLs.

Orders in Council (OIC) are regulations or legislative orders in relation to and authorized by an existing Act. This table identifies Yukon lands withdrawn from disposal, usually by Territorial Order in Council. In Corporate Spatial Warehouse (CSW) data is split out into spatial views by Act under which orders are authorized. The tables are comprehensive and include both active and expired orders. Spatial views show only the active data.In this table and spatial views, Regulations by Order in Council (OIC) are spatially represented to provide clarity regarding Yukon lands withdrawn from disposal. Spatial data is viewed by the Act under which the order is authorized. Not all orders are for withdrawal, different levels of withdrawal are common and not detailed in GIS attributes. It is important to read OIC documents for specific details ( [https://legislation.yukon.ca/legislation/page_a.html](https://legislation.yukon.ca:443/legislation/page_a.html) ).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Displays the levels of escalating enforcement applied by health officers to enforce the Manitoba Food and Food Handling Establishment Regulations when food safety violations are not corrected in the prescribed period of timeThis table displays the frequency in which health officers applied escalating levels of enforcement to food processors who did not correct food safety violations in the prescribed amount of time indicated in the inspection. Food processors are given a period of time to correct food safety violations based on the associated risk to food safety. Escalating enforcement is only applied if the violation is not corrected in the prescribed period of time. This table was created by the Food Safety and Inspection Branch - Agriculture and Resource Development department.Field Names (Field Alias): Field description. Period (Period):The period for which the data was collected. Either quarterly or yearly. Year (Year): The specific year of the previously mentioned data collection period. Date (Date): The dates of the calendar year in which the data was collected during a period. Enforcement_Type (Enforcement Type): The individual levels of escalating enforcement applied by health officers. The values for this field are "Warning letter", "Verbal warning", "Offence notice issued", "Closure orders issued", "Suspensions", "Products seized and destroyed", "Products seized and held". Total (Total): the number of occurrences a level of escalating enforcement was applied in a period.

A Linear Safety Feature is one of a number of various appliances/appurtenances that have been installed or constructed either alongside or as an integral part of the road infrastructure to reduce the severity or potential of accidents. It is a Linear feature