The contaminants in fish database is a compilation of contaminant data analysed from fish tissue at the Fresh Water Institute from 1970 to 2005. Data include lab number, region, analysis, organs, species, lake, form (whole fish, headon dressed, headless dressed), weight, and length and contaminant concentrations. Total mercury was the predominant contaminant measured. Results were expressed as ppm or ppb based on the parameter analyzed. Concentrations are expressed based on wet weight.

Well capture zones are intended to identify potential areas of risk to aquifers where the release of contaminants could affect the water quality of community wells. The information was compiled as a discreet project under the 'Yukon Water Strategy' and represents a 'snapshot in time' of the Drinking Water Systems. Well capture zones were identified using a combination of buffers, analytical methods, and groundwater flow modelling using the Waterloo Hydrogeologic Inc. Visual MODFLOW.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Aquifer Vulnerability Index (AVI) is a method of assessing the vulnerability of aquifers to surface contaminants in Alberta. An aquifer is a geological formation that is permeable enough to transmit sufficient quantities of water to possible to support the development of water wells. In the assessment of aquifer vulnerability to potential contamination, the depth to the aquifer and the types of geological materials above them are considered. For example, aquifers closer to the surface overlain with pervious surface materials are more vulnerable to contaminants, as compared to aquifers found deeper and covered with a thick layer of impervious material. The AVI ratings indicate the potential of surficial materials to transmit water withy contaminants to the aquifer over a period of time. This data was created in 2002 using ArcGIS.

Fisheries and Oceans Canada (DFO) Maritime Science Branch has collected grain size data from sediment and water column samples using bottle samples, sediment cores, and sediment grabs as part of numerous research projects not only in the Atlantic provinces, but also worldwide. The data collected by DFO focuses on the fine grained (<1mm) particles as these are both a source of food and means of contaminant transport. Grain size data are used to study the fate and distribution of complimentary chemistries like heavy metals, pesticides, hydrocarbons, aquaculture waste as well as a variety of physical processes such as the resuspension and transport of sediment.

Stormwater ponds are artificial structures that are critical components of stormwater management systems in many Canadian cities. They serve to prevent flooding of urban areas during excess rainfall. Stormwater ponds also contribute to environmental health by allowing the settlement of dirt and solids from stormwater to the bottom of the pond. As a result, the sediments of stormwater ponds can become enriched with potentially harmful contaminants. The health risks posed to anglers by contact with stormwater and sediments and consumption of fish from stormwater ponds are not well characterized. The City of Lacombe (Alberta) is a municipality with two stormwater ponds stocked with sterile fish for angling. Alberta Health collected water, sediment and fish from these two ponds over two seasons (fall 2010 and spring 2011) and analyzed the samples for a suite of contaminants. Water samples were collected from three sites at each pond and three depths for each site (n=40; nine samples plus one replicate sample per pond per season). Sediment samples were collected from the same three sites at each pond (n=12; three samples per pond per season). Fish samples (rainbow trout) were collected in fall 2010 (n=18; eight from East Pond and ten from Len Thompson Pond). For the contaminant analysis, all samples (water, sediment and fish) were tested for parent and alkylated polycyclic aromatic hydrocarbons (PAHs). Additionally, water samples were tested for routine chemicals, trace metals, pesticides and volatile organic compounds (VOCs), and fish muscle tissue was tested for total mercury.

Timing windows are the period(s) during the year when work may be carried out in and about water bodies with the lowest risk to fish and wildlife species and habitat. Timing windows and terms and conditions vary based on regional differences in fish and wildlife species and habitat, and geography. The timing window of least risk to fish and fish habitat must be applied to all activities in water bodies, as well as tributaries that have a risk of depositing sediment into water bodies. Windows of least risk are designed to protect all fish species known to occur in a water body.

Water wells where ground water quality samples were collected by the Naquadat Program between 1954 and 1980

Each summer, environmental community groups collect important data to determine if groupings of fish, shrimp and crab – what is called a community- can be used as an indicator of the health status of bays and estuaries. Sampling was conducted from May through September for the first years then from June through August. In 2018 and 2019, the sampling was conducted just once in each estuary. Community group members and staff sample six stations once a month in their designated estuary.Fish, shrimps and crabs are collected with a beach seine net and later released live back to the water once identified and counted. From this, the community groups provide important information to Fisheries and Oceans Canada, including:- identification and numbers of fish, shrimp and crab species;- water conditions and samples;- information on aquatic plants;- sediment samples.With this information, Fisheries and Oceans Canada scientists working with government agencies and universities can conduct analyses to determine the suitability of indicators to assess the health of bays and estuaries.PARAMETERS COLLECTED:Parameters: abundance, species richness, species developmental stage (young-of-the-year or adult), water temperature, water salinity, water dissolved oxygen, dissolved inorganic nutrient (nitrate, nitrite, phosphate), sediment % organic content, sediment % humidity content and sediment mean grain size, % submerged aquatic vegetation coverNOTES ON QUALITY CONTROL:Data entry into Excel and first quality control verification is done by CAMP summer students. A second quality control verification is done by DFO staff. See publ # 2823 attached to this record.In 2018, the historical data was migrated into a relationship database. From this year on, annual data will be entered into the database using a custom application. The application front end has numerous QC elements built-in.SAMPLING METHODS:Please see the following URL for sampling details: http://www.dfo-mpo.gc.ca/Library/319437.pdf

This theme presents the location of samples of contaminants of emerging interest (CIE) carried out by the Main Directorate for the Quality of Aquatic Environments (DPQMA) as part of its work since 2000. Each station is accompanied by a link in the attribute table allowing the reader to access an Excel file presenting the concentrations of CIE detected, the list of CIE analyzed at least once at the station, the list of reports produced from the samples taken at the station, as well as information on surface water quality criteria for the protection of aquatic life.The dataset on contaminants of emerging interest also includes a layer of polygons presenting the drainage areas of some of the stations and a data table including the compilation of land use by category for the last year available at the time the data was generated. The drainage areas and the land use table are linked to the sampling stations based on the BQMA station number.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Under the Regulation Respecting the Mandatory Reporting of Certain Contaminant Emissions into the Atmosphere (RDOECA), the Ministère de l'Environnement et de la Lutte contre les Changements Climates de la Faune et des Parcs collects data on air contaminants emitted by Quebec businesses in particular. Thus, any person or municipality operating an establishment that emits air contaminants above thresholds into the atmosphere is required to report its emissions no later than June 1 of each year. This dataset includes emissions of air contaminants reported under RDOECA or voluntarily expressed in metric tons, with the exception of dioxin and furan emissions, which are expressed in metric tons of toxic equivalents.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**