Includes: * contour land * contour land approximate * contour land auxiliary/interpolated * contour land depression In southern Ontario the contour interval is 5 meters. In the near north the contour interval is 10 meters. In the Far North the contour interval depends on the information source. Data is collected on an irregular basis.

This dataset contain all of the 1:20 000 scale index contour information converted from the Provincial Digital Base Mapping Project. These contour arcs are a cartographic product and they do not have any elevation values attributed to the spatial features. These contours require the use of elevation text to properly interpret the elevation value of a specific contour. Index contours are identified every 5th contour line. For Alberta, the index contour intervals occur every 50 metres in relatively flat terrain and every 100 metres in mountainous terrain. Currently, no contour information exists for Banff, Jasper and Wood Buffalo National Parks and also for the Extreme north east portion of the province.

This dataset contain the 1:20,000 scale contour elevation text converted from the Provincial Digital Base Mapping Project. These contours require the use of elevation text to properly interpret the elevation value of a specific contour. There are two major types of contours, index contours and intermediate contours. Index contours are identified every 5th contour line. For Alberta, the index contour intervals occur every 50 metres in relatively flat terrain and every 100 metres in mountainous terrain. Intermediate contours are contour lines that occur between the index contours. For Alberta, the intermediate contour intervals are every 10 metres in relatively flat terrain and every 20 metres in mountainous terrain. Where elevation change is sudden, intermediate contours may be deleted and only index contours are shown. The elevation text is associated with the index contours. Currently, no contour information exists for Banff, Jasper and Wood Buffalo National Parks and also for the extreme north east portion of the province. See the Completeness Report in this metadata record for details regarding coverage.

This dataset contains all of the 1:20 000 scale contour information converted from the Provincial Digital Base Mapping Project. These contour arcs are a cartographic product and they do not have any elevation values attributed to the spatial features. These contours require the use of elevation text to properly interpret the elevation value of a specific contour. There are two major types of contours, index contours and intermediate contours. Index contours are identified every 5th contour line. For Alberta, the index contour intervals occur every 50 metres in relatively flat terrain and every 100 metres in mountainous terrain. Intermediate contours are contour lines that occur between the index contours. For Alberta, the intermediate contour intervals are every 10 metres in relatively flat terrain and every 20 metres in mountainous terrain. Where elevation change is sudden, intermediate contours may be deleted and only index contours are shown. Currently, no contour information exists for Banff, Jasper and Wood Buffalo National Parks and also for the extreme north east portion of the province. See the Completeness Report in this metadata record for details regarding coverage.

Terrain contours (TRNCNT) is a vector delineation of areas of equivalent elevation, in 5 m classes, as contour lines.Download: Here The Saskatchewan Ministry of Environment, Forest Service Branch, has developed a forest resource inventory (FRI) which meets a variety of strategic and operational planning information needs for the boreal plains. Such needs include information on the general land cover, terrain, and growing stock (height, diameter, basal area, timber volume and stem density) within the provincial forest and adjacent forest fringe. This inventory provides spatially explicit information as 10 m or 20 m raster grids and as vectors polygons for relatively homogeneous forest stands or naturally non-forested areas with a 0.5 ha minimum area and a 2.0 ha median area.  Terrain contours (TRNCNT) is a vector delineation of areas of equivalent elevation, in 5 m classes, as contour lines.  For more information, see the Forest Inventory Standard of the Saskatchewan Environmental Code, Forest Inventory Chapter.

Line information containing elevation isobars to aid in the depiction of changes in elevation at 1:1,000,000 scale. (eg. mountain peaks or depressions). Contour lines captured at 1:1,000,000 scale from Digital Chart of the World data for the Yukon and surrounding area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Contour Lines for the Pasqua, Crooked, Echo, and Round Lakes within the Qu’Appelle Valley river system in Saskatchewan

Elevation Features entities are: Contour and Elevation Point. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Elevation Features entities are: Contour and Elevation Point. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Contour Lines generated from LiDAR data captured by McElhanney Consulting Services Ltd (MCSL). The contour lines connect points of equal elevation for the landscape covered by this project.