This dataset contain the 1:20,000 scale contour elevation text converted from the Provincial Digital Base Mapping Project. These contours require the use of elevation text to properly interpret the elevation value of a specific contour. There are two major types of contours, index contours and intermediate contours. Index contours are identified every 5th contour line. For Alberta, the index contour intervals occur every 50 metres in relatively flat terrain and every 100 metres in mountainous terrain. Intermediate contours are contour lines that occur between the index contours. For Alberta, the intermediate contour intervals are every 10 metres in relatively flat terrain and every 20 metres in mountainous terrain. Where elevation change is sudden, intermediate contours may be deleted and only index contours are shown. The elevation text is associated with the index contours. Currently, no contour information exists for Banff, Jasper and Wood Buffalo National Parks and also for the extreme north east portion of the province. See the Completeness Report in this metadata record for details regarding coverage.

This dataset contains all of the 1:20 000 scale contour information converted from the Provincial Digital Base Mapping Project. These contour arcs are a cartographic product and they do not have any elevation values attributed to the spatial features. These contours require the use of elevation text to properly interpret the elevation value of a specific contour. There are two major types of contours, index contours and intermediate contours. Index contours are identified every 5th contour line. For Alberta, the index contour intervals occur every 50 metres in relatively flat terrain and every 100 metres in mountainous terrain. Intermediate contours are contour lines that occur between the index contours. For Alberta, the intermediate contour intervals are every 10 metres in relatively flat terrain and every 20 metres in mountainous terrain. Where elevation change is sudden, intermediate contours may be deleted and only index contours are shown. Currently, no contour information exists for Banff, Jasper and Wood Buffalo National Parks and also for the extreme north east portion of the province. See the Completeness Report in this metadata record for details regarding coverage.

Line information containing elevation isobars to aid in the depiction of changes in elevation at 1:1,000,000 scale. (eg. mountain peaks or depressions). Contour lines captured at 1:1,000,000 scale from Digital Chart of the World data for the Yukon and surrounding area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Terrain contours (TRNCNT) is a vector delineation of areas of equivalent elevation, in 5 m classes, as contour lines.Download: Here The Saskatchewan Ministry of Environment, Forest Service Branch, has developed a forest resource inventory (FRI) which meets a variety of strategic and operational planning information needs for the boreal plains. Such needs include information on the general land cover, terrain, and growing stock (height, diameter, basal area, timber volume and stem density) within the provincial forest and adjacent forest fringe. This inventory provides spatially explicit information as 10 m or 20 m raster grids and as vectors polygons for relatively homogeneous forest stands or naturally non-forested areas with a 0.5 ha minimum area and a 2.0 ha median area.  Terrain contours (TRNCNT) is a vector delineation of areas of equivalent elevation, in 5 m classes, as contour lines.  For more information, see the Forest Inventory Standard of the Saskatchewan Environmental Code, Forest Inventory Chapter.

This dataset contain all of the 1:20 000 scale index contour information converted from the Provincial Digital Base Mapping Project. These contour arcs are a cartographic product and they do not have any elevation values attributed to the spatial features. These contours require the use of elevation text to properly interpret the elevation value of a specific contour. Index contours are identified every 5th contour line. For Alberta, the index contour intervals occur every 50 metres in relatively flat terrain and every 100 metres in mountainous terrain. Currently, no contour information exists for Banff, Jasper and Wood Buffalo National Parks and also for the Extreme north east portion of the province.

Elevation - Elevation derived product. For example such as Canvec Contours, NWT NTDB Contours, Spot Elevations and MVAP Contours

Contours created at 50m and 10m intervals throughout New Brunswick. These contours are derived from 6 point per meter LiDAR data acquired between 2015 – 2018.

Curie point depth (CPD) mapping in Yukon was done using public domain aeromagnetic data from Natural Resources Canada. In this study, two different CPD methodologies were employed using two different window sizes (200 km and 300 km). Qualitatively, the results were broadly consistent regardless of the method or window size. South-central Yukon exhibits shallow CPD values while northern and southeastern Yukon have deeper CPD values. This suggests that south-central Yukon has higher levels of heat flow in the mid-to-lower crust compared to the rest of the territory. The CPD results are largely consistent with heat flow measurements from the near surface. Specifically, regions with shallow CPD estimates correspond to areas with elevated heat flow measurements. Geologically, the regions with shallow CPD correspond to the Cordillera, while deep CPD areas appear to be co-located with continental platform rocks of Ancestral North America. Comparison with Yukon-specific crustal geotherms derived from other data suggest that the CPD estimates for south-central Yukon are systematically too deep by 2 to 12 km. The discrepancy is likely caused by the need to better understand and account for the fractal distribution of magnetization in the crust in Yukon. The results of this CPD study are valuable in that 95% of Yukon has been demarcated into regions of shallow CPD (higher heat flow) and deep CPD (lower heat flow). These findings should be combined with other data, such as heat generation and sediment thickness estimates, to identify the most prospective regions of elevated subsurface heat in Yukon. Contours have been created for the gridded curie point depth at 1 km intervals and are presented along with the grid.Distributed from [GeoYukon](https://mapservices.gov.yk.ca/GeoYukon/) by the [Government of Yukon](https://yukon.ca/) . Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Elevation Features entities are: Contour and Elevation Point. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Elevation Features entities are: Contour and Elevation Point. CanVec is a digital cartographic reference product of Natural Resources Canada (NRCan). It originates from the best available data sources covering Canadian territory, offers quality topographical information in vector format, and complies with international geomatics standards. CanVec is a multi-source product coming mainly from the National Topographic Data Base (NTDB), the Mapping the North process conducted by the Canada Center for Mapping and Earth Observation (CCMEO), the Atlas of Canada data, the GeoBase initiative, and the data update using satellite imagery coverage (e.g. Landsat 7, Spot, Radarsat, etc.).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)