Represents the boundary line of Saskatchewan Crown resource lands designated as provincial forests as described in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020.Boundaries of the Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests are described, as well as the southern portion of the Northern Provincial Forest. Crown resource lands contained within these boundaries are designated as provincial forest. Certain lands have been deemed to be withdrawn from the provincial forest pursuant to subsection 12(4) of the Act. The Forest Resources Management Act The Forest Resources Management Regulations The provincial forest boundary is described by clauses and subclauses in The Forest Resources Management Regulations. Each provincial forest boundary description clause and subclause has a corresponding line feature in FORESTRY.PLANNING_Forest_Boundary. Clause descriptions position provincial forest boundary line features according to Saskatchewan’s Land Survey System by Township, Range, and Meridian. Subclause descriptions further positions provincial forest boundary line features within the clause. When a subclause describes the provincial forest boundary according to a water body or water course bank, line features are digitized from the Saskatchewan Geospatial Imagery Collaborative 2016 three-band (red, green, blue) SPOT 6 and 7 satellite imagery mosaic, pan-sharpened to 1.5 m resolution (IMAGERY.SGIC_SPOT_RGB_2016_Ref). In certain situation, applying this satellite imagery to the provincial forest boundary description results in a gap between land and water. In such cases, in order to maintain a contiguous boundary, a new line feature is created that has no corresponding clause and subclause in The Forest Resources Management Regulations. These “Land to Water Gap” features are identified as such in the SUBCLAUSE_DESCR field. When a subclause describes the provincial forest boundary according to the Saskatchewan Land Survey System, line features are extracted from Information Services Corporation CADASTRE data (CADASTRE.SG_SECTION, .SG_QUARTERSECTION, .SG_LEGALSUBDIVISION, .surface, .boundary, .right_of_way). By convention, the west boundary of a line feature is defined by the vector west of the road allowance and the south boundary of a line feature is defined by the vector south of the road allowance. In certain situation, applying this convention to the provincial forest boundary description results in a gap created by an adjacent east or north road allowance. In such cases, in order to maintain a contiguous boundary, a new line feature is created that has no corresponding clause and subclause in The Forest Resources Management Regulations. These “Road Allowance Gap” features are identified as such in the SUBCLAUSE_DESCR field. In spite of west / south boundary road allowance convention, when a road allowance forms the boundary of the provincial forest, in FORESTRY.PLANNING_Forest_Boundary, the line feature is drawn such that the road allowance is excluded from the provincial forest.

This dataset contains spatial and attribute information for local and regional greenspaces in British Columbia. Local and regional greenspaces are municipal or regional district lands designated by local government agencies and managed for public enjoyment, ecosystem or wildlife values. Spatial boundaries were sourced from municipal and regional district web sites, which in some cases provide datasets under Open Government Licence, and in other cases, publicize parks and greenspaces on web maps or pdf maps. Boundaries were edge-matched to the ParcelMap BC cadastre. This spatial layer contains multipart polygons.

Ontario's Crown forest is divided into geographic planning areas, known as forest management units. Most of these units are managed by individual forest companies under a Sustainable Forest License. A forest management unit is identified by an assigned official name (e.g., Black Spruce Forest) and a unique numeric code. Before any forestry activities can take place in a management unit, there must be an approved forest management plan in place for each management unit. Instructions for downloading this dataset: This product requires the use of geographic information system (GIS) software.

This data contains location information for 1 of Ontario’s snow monitoring networks: * Surface Water Monitoring Centre (SWMC) Snow course data is collected by: * conservation authorities * Ontario Power Generation * Ministry of Natural Resources (MNR) districts Data is collected twice a month from November 15 until May 15. The Surface Water Monitoring Centre uses this data to assess: * current snow cover * frozen ground conditions * snowpack * potential snowmelt * contributions to streamflow The snow data is located in a corporate water and climate database. This data helps MNR and conservation authorities assess the potential for flood at the local and provincial scale.

Canada's National Forest Inventory (NFI) sampling program is designed to support reporting on forests at the national scale. On the other hand, continuous maps of forest attributes are required to support strategic analyses of regional policy and management issues. We have therefore produced maps covering 4.03 × 106 km2 of inventoried forest area for the 2001 base year using standardised observations from the NFI photo plots (PP) as reference data. We used the k nearest neighbours (kNN) method with 26 geospatial data layers including MODIS spectral data and climatic and topographic variables to produce maps of 127 forest attributes at a 250 × 250 m resolution. The stand-level attributes include land cover, structure, and tree species relative abundance. In this article, we report only on total live aboveground tree biomass, with all other attributes covered in the supplementary data (http://nrcresearchpress.com/doi/suppl/10.1139/cjfr-2013-0401). In general, deviations in predicted pixel-level values from those in a PP validation set are greater in mountainous regions and in areas with either low biomass or sparse PP sampling. Predicted pixel-level values are overestimated at small observed values and underestimated at large ones. Accuracy measures are improved through the spatial aggregation of pixels to 1 km2 and beyond. Overall, these new products provide unique baseline information for strategic-level analyses of forests (https://nfi.nfis.org)Collection:- **[Canada's National Forest Inventory (NFI) 2006](https://open.canada.ca/data/en/dataset/e2fadaeb-3106-4111-9d1c-f9791d83fbf4)**

The raster maps depict a suite of forest attributes in 2001* and 2011 at 250 m by 250 m spatial resolution. The maps were produced using the k nearest neighbours method applied to MODIS imagery and trained from National Forest Inventory photo plot data. For detailed information about map production methods please refer to Beaudoin et al. (2018) "Tracking forest attributes across Canada between 2001 and 2011 using the k nearest neighbours mapping approach applied to MODIS imagery." Canadian Journal of Forest Research 48, 85-93. https://cfs.nrcan.gc.ca/publications?id=38979 The map datasets may be downloaded from https://nfi.nfis.org/downloads/nfi_knn2011.zip or https://open.canada.ca/data/en/dataset/ec9e2659-1c29-4ddb-87a2-6aced147a990 * Note: the forest composition (leading tree genus) map depicts forest attributes in 2001.How can this data be used?The resolution and accuracy of these map products are best suited for strategic-level forest reporting and informing policy and decision making at regional to national scales. As these maps also offer a coherent set of quantitative values for a large suite of forest attributes, they can be used as baseline information for modelling and in calculations such as merchantable forest volume or percentage of tree species. It is also possible to overlay these maps with other maps produced on the same pixel grid to make assessments of disturbance impacts, such as fire and harvests.

BCGS 1:2,500 scale grid, North Amercian Datum 1983. The British Columbia Geographic System is a geographic system in which the coverage in minutes and seconds of longitude is double the coverage in minutes and seconds of latitude for sheets at all scales

BCGS 1:2,500 scale grid, North Amercian Datum 1927. The British Columbia Geographic System is a geographic system in which the coverage in minutes and seconds of longitude is double the coverage in minutes and seconds of latitude for sheets at all scales.This particular grid was generated in the older NAD27 datum to replicate historic Water Rights paper maps used by surface water rights management program

The Guide to Crown Land Use Planning Atlas (CLUPA) is the authoritative source for information on overlays. The dataset maintains a spatial record for all geographic areas of Ontario affected by the designations that modify area- specific land use policy. To be used as an overlay to [CLUPA Provincial data class](/data/crown-land-use-policy-area-provincial). Official GEO title: CLUPA Overlay

Province-wide SDE spatial layer displaying the approximate extent and providing the elevation of designated permitted power-storage reservoir areas over crown lands, along with water licence attributes. This layer is an instantiation of the spatial view WLS_RESERVOIR_PMT_LICENSEE_SVW