Real-time water level and flow (discharge) data collected at over 2100 hydrometric stations across Canada (last 30 days).

This map data displays environmental discharges (spills) in Saskatchewan with location, confirmed substance and quantity. This data is limited to events that occurred between January 1, 2015 to present.The Ministry of Environment is responsible for responding to incidents where a substance of potential concern has been discharged into the environment. The Environmental Management and Protection Act, 2010 defines this as a discharge, drainage, deposit, release or emission into the environment.We are currently improving how this information is displayed. This map provides information on more recent discharges that were reported to the ministry. For older Spills, please go to our new GeoHub page: Discharge Cases (Spills) historic incidents”Please note: information may take up to 30 days to be updated and is subject to change at any time.For further information, please contact the Ministry of Environment Inquiry Centre (Toll Free): 800-567-4224, email: centre.inquiry@gov.sk.ca or visit: Hazardous Spills Reporting.

This category encompasses items of surplus that have been removed from various pieces of furniture and equipment destined for landfills throughout the Province. These pieces are then sent to, or picked up by, various organizations committed to the Province’s continuing program on the diversion of solid waste from Provincial or Municipal landfills. There are other pieces of surplus equipment, such as IT assets, that may be broken, causing removal of sensitive information to be impossible in the traditional manner. In such cases, these items are securely disposed of by the Province’s contracted metal recycler. Other surplus or obsolete electronic items are recycled through the Atlantic Canada’s Electronic Stewardship (ACES) in accordance with the Electronic Product Stewardship Regulations.

The monthly mean is the average of daily mean values for a given month.

The daily mean is the average of all unit values for a given day.

Bottom dissolved oxygen time series at the 3 fixed stations and 46 stations, grouped into transects, of the Atlantic Zonal Monitoring Program (AZMP) under the Quebec region responsibility.The mean bottom dissolved oxygen of the last ten years are displayed as 2 layers, one for the June survey (2014-2023, 2020 not sampled), another for the autumn survey (2014-2023). A third layer shows the positions of the fixed stations of the program (Anticosti Gyre, Gaspé Current and Rimouski).Each station is linked with a .png file showing the bottom dissolved oxygen time series and with a .csv file containing all the bottom dissolved oxygen data acquired at those stations since the beginning of the program sampling (columns : Station, Latitude, Longitude, Date(UTC), Sounding(m), Depth/Profondeur(m), Dissolved_Oxygen/Oxygène_Dissous(%sat)).PurposeThe Atlantic Zone Monitoring Program (AZMP) was implemented in 1998 with the aim of increasing the Department of Fisheries and Oceans Canada’s (DFO) capacity to detect, track and predict changes in the state and productivity of the marine environment.The AZMP collects data from a network of stations composed of high-frequency monitoring sites and cross-shelf sections in each following DFO region: Québec, Gulf, Maritimes and Newfoundland. The sampling design provides basic information on the natural variability in physical, chemical, and biological properties of the Northwest Atlantic continental shelf. Cross-shelf sections sampling provides detailed geographic information but is limited in a seasonal coverage while critically placed high-frequency monitoring sites complement the geography-based sampling by providing more detailed information on temporal changes in ecosystem properties.In Quebec region, two surveys (46 stations grouped into transects) are conducted every year, one in June and the other in autumn in the Estuary and Gulf of St. Lawrence. Historically, 3 fixed stations were sampled more frequently. One of these is the Rimouski station that still takes part of the program and is sampled about weekly throughout the summer and occasionally in the winter period.Annual reports (physical, biological and a Zonal Scientific Advice) are available from the Canadian Science Advisory Secretariat (CSAS), (http://www.dfo-mpo.gc.ca/csas-sccs/index-eng.htm).Devine, L., Scarratt, M., Plourde, S., Galbraith, P.S., Michaud, S., and Lehoux, C. 2017. Chemical and Biological Oceanographic Conditions in the Estuary and Gulf of St. Lawrence during 2015. DFO Can. Sci. Advis. Sec. Res. Doc. 2017/034. v + 48 pp.Supplemental InformationBottom dissolved oxygen is determined from CTD profile in the water column according to AZMP sampling protocol:Mitchell, M. R., Harrison, G., Pauley, K., Gagné, A., Maillet, G., and Strain, P. 2002. Atlantic Zonal Monitoring Program sampling protocol. Can. Tech. Rep. Hydrogr. Ocean Sci. 223: iv + 23 pp.

Patterns of wet deposition of the nitrate (NO3), non-sea-salt sulfate (xSO4) and ammonium (NH4) ions across areas of Canada and the United States are based on measurements of precipitation depth and ion concentrations in precipitation samples. xSO4 refers to the wet deposition of sulfate with the sea-salt sulfate contribution removed at coastal sites. These measurements were collected and quality controlled by their respective networks: in Canada, the federal Canadian Air and Precipitation Monitoring Network (CAPMoN) and provincial or territorial networks in Alberta, New Brunswick, the Northwest Territories, Nova Scotia, Ontario and Quebec. In the United States, wet deposition measurements were made by two coordinated networks: the National Atmospheric Deposition Program (NADP) / National Trends Network (NTN) and the NADP/Atmospheric Integrated Research Monitoring Network (AIRMoN). Only data from sites that were designated as regionally representative were used in the mapping. Wet deposition amounts were interpolated by ordinary kriging using ArcMap Geostatistical Analyst. The map is limited to the contiguous U.S. and southeastern or southern Canada because outside that region, the interpolation error exceeds 30% due to the larger distances between stations. Links to annual and five-year average maps are available in the associated resources.

Sectors and days for collecting waste, recyclable materials and compostable materials.attributs:ID - Unique identifierDAY1 - Sector collection day (see also DAY2 and DAY3) DAY2 - Sector collection day (see also DAY1 and DAY3) DAY3 - Sector collection day (see also DAY1 and DAY3) DAY3 - Sector collection day (see also DAY1 and DAY2) CALENDAR - Hyperlink to the sector collection calendar (see also DAY1 and DAY3)**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Accumulated Precipitation represents the amount of total precipitation in mm (solid and/or liquid) which has been recorded over a given period of time. Products are produced for the following timeframes: Agricultural Year, Growing Season, Winter Season, as well as rolling products for 7, 14, 30, 60, 90, 180, 270, 365, 730, 1095, 1460 and 1825 days.

The Wastewater Systems Effluent Regulations (WSER), developed under the Fisheries Act, came into force in 2012 to manage wastewater releases by systems that collect an average daily influent volume of 100 cubic metres or more. The WSER also does not apply to any wastewater system located in the Northwest Territories, Nunavut and north of the 54th parallel in the provinces of Quebec and Newfoundland and Labrador. The WSER set national baseline effluent quality standards that are achievable through secondary wastewater treatment. The WSER require owners or operators of wastewater systems with combined sewers to submit an annual report on the total volume and the number of days wastewater is discharged per month via combined sewer overflow (CSO) points as a result of precipitation.The map below shows the volume of effluent (in cubic metres) discharged in a year from all CSO points situated within the collection area of a wastewater system. For the most part, the volumes provided to ECCC are estimates.Please note, a value of “999999999” in the dataset indicates that the volume data is unavailable and it does not mean that a volume of 999,999,999 m3 was released within the collection area of a wastewater system.The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting wastewater systems, datasets are available in either CSV or XLS formats.Data from QuebecAs of 2018, no combined sewer overflow volumes from Quebec municipalities are available since an equivalency agreement is now in effect.More information on the wastewater sector including the regulations, agreements, contacts and resource documents is available at: https://www.canada.ca/wastewater