Deforestation in Canada is estimated with the National Deforestation Monitoring System (NDMS). Details describing this process are published here: https://cfs.nrcan.gc.ca/publications?id=36042. Deforestation is the direct human-induced conversion of forested land to non-forested land use. Canada’s National Deforestation Monitoring System (NDMS) was designed and implemented to provide information needed by Canada to meet its obligation under the United Nations Framework Convention on Climate Change (UNFCCC) to report the areas affected annually by deforestation. It also provides important information for the public, government policy makers, and scientists. To provide information about the amount of deforestation and why, where, and when it occurred in Canada, the NDMS uses deforestation mapped on a system of sample areas. The mapping is based on visual interpretation of satellite imagery supported by available ancillary information, such as high resolution imagery, forest inventory, and industrial databases, and informed by records-based information and expert knowledge. Accurate detection and mapping of deforestation events involves manual interpretation of satellite remote sensing imagery by specialized analysts. A key factor in the mapping is to distinguish deforestation from other forest cover losses that occur in Canada. The NDMS was designed to make use of all available lines of evidence and be flexible to accommodate variable resourcing levels. This system has been producing national deforestation monitoring results annually since 2006. The flexibility of the NDMS’s design makes it possible to adapt to future changes in data and resource availability, and positions the program well for sustained operational delivery into the future.

Data show where pathogens - fungal, bacillial or viral - have caused damage by reducing growth rates, tree vigor or have killed trees. Examples of forest diseases include White Pine Blister Rust, Armillaria Root Rot etc. The Government of Ontario tracks forest damage events to help proactively manage the detrimental effects to our forests. We monitor the threat and spread of invasive forest pest insect species in Ontario. The data is also important to the Forest Management Planning process in calculating timber volume loss within affected areas. This product requires the use of geographic information system (GIS) software.

This publication contains thirteen (13) maps of different biogeochemical and soil properties of forest ecosystems of Canada’s managed forest. A scientific article gives additional details on the methodology: Paré, D., Manka, F., Barrette, J., Augustin, F., Beguin, J. 2021. Indicators of site sensitivity to the removal of forest harvest residues at the sub-continental scale: mapping, comparisons, and challenges. Ecol. Indicators. https://dx.doi.org/10.1016/j.ecolind.2021.107516

Data from the former Kemptville, Midhurst and Aylmer Districts were compiled in this dataset to show forest areas on private land, managed by the landowner in cooperation with the Ontario Ministry of Natural Resources under the Woodlands Improvement Act (WIA). The WIA allowed for 15-year management agreements between landowners and the MNR to plant and improve woodlands on private land. The WIA was in place from 1966-1999. This data is being provided as-is. No additional data is available, and no updates or maintenance are planned for this dataset.

This feature delineates forest and vegetation stands in the Yukon at a scale of 1: 40 ,000. It is a management level forest inventory (as opposed to a n operational level) - meaning that analysis and mapping are most effective close to the 1:40,000 scale and not larger . This inventory has been completed in various stages : delineation from hardcopy black and white photographs took place from 1987 to 2002; while recent data collection has proceeded through a digital (aka 'softcopy') methodology of scanned photographs and digital elevation models.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Forest encroachment onto grasslands

Organic soils in the boreal forest commonly store as much carbon as the vegetation above ground. While recent efforts through the National Forest Inventory has yielded new spatial datasets of forest structure across the vast area of Canada’s boreal forest, organic soils are poorly mapped. In this geospatial dataset, we produce a map primarily of forested and treed peatlands, those with more than 40 cm of peat accumulation and over 10% tree canopy cover. National Forest Inventory ground plots were used to identify the range of forest structure that corresponds to the presence of over 40 cm of peat soils. Areas containing that range of forest cover were identified using the National Forest Inventory k-NN forest structure maps and assigned a probability (0-100% as integer) of being a forested or treed peatland according to a statistical model. While this mapping product captures the distribution of forested and treed peatlands at a 250 m resolution, open, completely treeless peatlands are not fully captured by this mapping product as forest cover information was used to create the maps. The methodology used in the creation of this product is described in:Thompson DK, Simpson BN, Beaudoin A. 2016. Using forest structure to predict the distribution of treed boreal peatlands in Canada. Forest Ecology and Management, 372, 19-27. https://cfs.nrcan.gc.ca/publications?id=36751 This distribution uses an updated forest attribute layer current to 2011 from:Beaudoin A, Bernier PY, Villemaire P, Guindon L, Guo XJ. 2017. Species composition, forest properties and land cover types across Canada’s forests at 250m resolution for 2001 and 2011. Natural Resources Canada, Canadian Forest Service, Laurentian Forestry Centre, Quebec, Canada. https://doi.org/10.23687/ec9e2659-1c29-4ddb-87a2-6aced147a990 Additionally, this distribution varies slightly from the original published in 2016 in that here slope data is derived from the CDEM: https://open.canada.ca/data/en/dataset/7f245e4d-76c2-4caa-951a-45d1d2051333 The above peatland probability map was further processed to delineate bogs vs fens (based on mapped Larix content via the k-NN maps), as well as an approximation of the extent of open peatlands using EOSD data. The result is a 9-type peatland map with a more complete methodology as detailed in: Webster, K. L., Bhatti, J. S., Thompson, D. K., Nelson, S. A., Shaw, C. H., Bona, K. A., Hayne, S. L., & Kurz, W. A. (2018). Spatially-integrated estimates of net ecosystem exchange and methane fluxes from Canadian peatlands. Carbon Balance and Management, 13(1), 16. https://doi.org/10.1186/s13021-018-0105-5 In plain text, the legend for the 9-class map is as follows:value="0" label="not peat" alpha="0"value="1" label="Open Bog" alpha="255" color="#0a4b32"value="2" label="Open Poor Fen" alpha="255" color="#5c5430"value="3" label="Open Rich Fen" alpha="255" color="#792652"value="4" label="Treed Bog" alpha="255" color="#6a917b"value="5" label="Treed Poor Fen" alpha="255" color="#aba476"value="6" label="Treed Rich Fen" alpha="255" color="#af7a8f"value="7" label="Forested Bog" alpha="255" color="#aad7bf"value="8" label="Forested Poor Fen" alpha="255" color="#fbfabc"value="9" label="Forested Rich Fen" alpha="255" color="#ffb6db"This colour scale is given in qml/xml format in the resources below. The 9-type peatland map from Webster et al 2018 was further refined slightly following two simple conditions: (1) any 250-m raster cell with greater than 40% pine content is classified as upland (non-peat); (2) all 250-m raster cells classified as water or agriculture via the NRCan North American Land Cover Monitoring System (https://doi.org/10.3390/rs9111098) is also classified as non-peatland (value of zero in the 9-class map. This mapping scheme was used at a regional scale in the following paper: Thompson, D. K., Simpson, B. N., Whitman, E., Barber, Q. E., & Parisien, M.-A. (2019). Peatland Hydrological Dynamics as A Driver of Landscape Connectivity and Fire Activity in the Boreal Plain of Canada. Forests, 10(7), 534. https://doi.org/10.3390/f10070534 And is reproduced here at a national scale. Note that this mapping product does not fully capture all permafrost peatland features covered by open canopy spruce woodland with lichen ground cover. Nor are treeless peatlands near the northern treeline captured in the training data, resulting in unknown mapping quality in those regions.

This product provides population counts for 2001 and 2016 for 105 census subdivisions (CSDs) for which the forest sector is a major source of employment income—defined by Natural Resources Canada as 20% or more of total CSD income excluding government transfers. These files were produced by Statistics Canada, Environment, Energy and Transportation Statistics Division, 2018, special tabulation from the 2001 and 2016 Census of Population; Natural Resources Canada, Canadian Forest Services, Economic Analysis Division; Canada’s National Forest Inventory (NFI), 2016, Grouped kNN Map layers, http://tree.pfc.forestry.ca (accessed April 7, 2017). Data from the 2016 Census of Population were used to identify the 105 census subdivisions. Note that changes occur to the number and the boundaries of CSDs between censuses. Adjustments were made to CSD boundaries to account for changes.Some data were suppressed for data quality reasons or to meet the confidentiality requirements of the Statistics Act. Income data were available for 3,675 of 5,162 CSDs. This analysis may therefore underreport the total number of communities for which the forest sector is a major economic driver. Note that a decline in the percentage of forest sector income may be due to a decrease in forest sector income or an increase in income from other sources. The reference period for income data in the Census of Population is the calendar year prior to the census.The forest sector includes North American Industry Classification codes 113 – forestry and logging, 1153 – support activities for forestry and logging, 321 – wood product manufacturing and 322 – paper product manufacturing.

High resolution forest change for Canada (Change Type) 1985-2011The forest change data included in this product is national in scope (entire forested ecosystem) and represents the first wall-to-wall characterization of wildfire and harvest in Canada at a spatial resolution commensurate with human impacts. The information outcomes represent 27 years of stand replacing change in Canada’s forests, derived from a single, consistent spatially-explicit data source, derived in a fully automated manner. This demonstrated capacity to characterize forests at a resolution that captures human impacts is key to establishing a baseline for detailed monitoring of forested ecosystems from management and science perspectives. Time series of Landsat data were used to characterize national trends in stand replacing forest disturbances caused by wildfire and harvest for the period 1985–2011 for Canada's 650 million hectare forested ecosystems (https://authors.elsevier.com/sd/article/S0034425717301360 ). Landsat data has a 30m spatial resolution, so the change information is highly detailed and is commensurate with that of human impacts. These data represent annual stand replacing forest changes. The stand replacing disturbances types labeled are wildfire and harvest, with lower confidence wildfire and harvest, also shared. The distinction and sharing of lower class membership likelihoods is to indicate to users that some change events were more difficult to allocate to a change type, but are generally found to be in the correct category. For an overview on the data, image processing, and time series change detection methods applied, as well as information on independent accuracy assessment of the data, see Hermosilla et al. (2016; http://www.tandfonline.com/doi/full/10.1080/17538947.2016.1187673).The data available is, 1. a binary change/no-change; 2. Change year; and, 3. Change type. When using this data, please cite as: White, J.C., M.A. Wulder, T. Hermosilla, N.C. Coops, and G. Hobart. (2017). A nationwide annual characterization of 25 years of forest disturbance and recovery for Canada using Landsat time series. Remote Sensing of Environment. 192: 303-321. DOI: 10.1016/j.rse.2017.03.035. https://authors.elsevier.com/sd/article/S0034425717301360Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

High resolution forest change for Canada (Binary Change/No-change) 1985-2011The forest change data included in this product is national in scope (entire forested ecosystem) and represents the first wall-to-wall characterization of wildfire and harvest in Canada at a spatial resolution commensurate with human impacts. The information outcomes represent 27 years of stand replacing change in Canada’s forests, derived from a single, consistent spatially-explicit data source, derived in a fully automated manner. This demonstrated capacity to characterize forests at a resolution that captures human impacts is key to establishing a baseline for detailed monitoring of forested ecosystems from management and science perspectives. Time series of Landsat data were used to characterize national trends in stand replacing forest disturbances caused by wildfire and harvest for the period 1985–2011 for Canada's 650 million hectare forested ecosystems (https://authors.elsevier.com/sd/article/S0034425717301360 ). Landsat data has a 30m spatial resolution, so the change information is highly detailed and is commensurate with that of human impacts. These data represent annual stand replacing forest changes. The stand replacing disturbances types labeled are wildfire and harvest, with lower confidence wildfire and harvest, also shared. The distinction and sharing of lower class membership likelihoods is to indicate to users that some change events were more difficult to allocate to a change type, but are generally found to be in the correct category. For an overview on the data, image processing, and time series change detection methods applied, as well as information on independent accuracy assessment of the data, see Hermosilla et al. (2016; http://www.tandfonline.com/doi/full/10.1080/17538947.2016.1187673).The data available is, 1. a binary change/no-change; 2. Change year; and, 3. Change type. When using this data, please cite as: White, J.C., M.A. Wulder, T. Hermosilla, N.C. Coops, and G. Hobart. (2017). A nationwide annual characterization of 25 years of forest disturbance and recovery for Canada using Landsat time series. Remote Sensing of Environment. 192: 303-321. DOI: 10.1016/j.rse.2017.03.035. https://authors.elsevier.com/sd/article/S0034425717301360Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011