The Regional Deterministic Air Quality Analysis (RDAQA) is an objective analysis of surface pollutants which combines numerical forecasts from the Regional Air Quality Deterministic Prediction System (RAQDPS) and hourly observational data from monitoring surface networks over North America in order to produce a better description of the air quality at every hour. Chemical constituents include 03, SO2, and NO2 gases, as well as fine particulate matter PM2.5 (2.5 micrometers in diameter or less) and coarse particulate matter PM10 (10 micrometers in diameter or less). Geographical coverage is Canada and the United States. Data is available only for the surface level, at a horizontal resolution of 10 km. The products are presented as historical, annual or monthly, averages which highlight long-term trends in cumulative effects on the environment.

The Regional Air Quality Deterministic Prediction System FireWork (RAQDPS-FW) carries out physics and chemistry calculations, including emissions from active wildfires, to arrive at deterministic predictions of chemical species concentration of interest to air quality, such as fine particulate matter PM2.5 (2.5 micrometers in diameter or less). Geographical coverage is Canada and the United States. Data is available at a horizontal resolution of 10 km. While the system encompasses more than 80 vertical levels, data is available only for the surface level. The products are presented as historical, annual or monthly, averages which highlight long-term trends in cumulative effects on the environment.

Results of the last hour available, in real time, of the [Air Quality Index (AQI)] (https://www.iqa.environnement.gouv.qc.ca/contenu/index.asp) for the stations of the [Quebec Air Quality Monitoring Network] (https://www.environnement.gouv.qc.ca/air/reseau-surveillance/Carte.asp). These results exclude those from stations located on [Montreal Island] (https://www.donneesquebec.ca/recherche/dataset/vmtl-rsqa-indice-qualite-air).The IQA is an information and awareness tool designed to inform the population about the quality of ambient air in Quebec.If you have any questions about this data, contact the Info-Air department:.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The National Pollutant Release Inventory (NPRI) is Canada's public inventory of pollutant releases (to air, water and land), disposals and transfers for recycling.The files below contain a map of Canada showing the locations of all facilities that reported releases to air (other than Criteria Air Contaminants (CAC)) to the NPRI. The data are for the most recent reporting year, by reported total quantities of these releases. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting facilities, a dataset is available in a CSV format.Please consult the following resources to enhance your analysis:- Guide on using and Interpreting NPRI Data: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/using-interpreting-data.html - Access additional data from the NPRI, including datasets and mapping products: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/tools-resources-data/exploredata.html

The Ministry of Environment operates a network of continuous ambient air monitoring stations to measure the concentration of air pollutants across Saskatchewan. This is considered 'raw data' that has not undergone quality control and quality assurance. 'Raw data' is not intended to provide medical or health care advice and should not be used in published documents. For best results download the entire dataset without filtering as a CSV. ‘Date and time’ as displayed is your local time. However, downloaded data is in UTC for ‘Date and time’. Any values of -9999, -999, or 9980 are invalid data.The Ministry of Environment operates a network of continuous ambient air monitoring stations. These stations are part of the National Air Pollution Surveillance (NAPS) network. Continuous ambient air monitoring stations measure the concentration of air pollutants across Saskatchewan. The data is used to:  • track and report on progress for achieving air quality objectives • measure representative pollutant concentrations and determine long-term trends and • provide air quality information to the public Air pollutants typically come from various industrial activity and natural sources, such as mining, oil and gas, agriculture, forest fires, electrical generation, and the transportation sector. Disclaimer: Hourly data contained on this website is automatically updated daily from Saskatchewan Ministry of Environment monitoring stations and is intended for informational purposes only. This is considered ‘raw data’ and may contain errors. 'Raw data' is not intended to provide medical or health care advice and should not be used in published documents. Data integrity and validity may be affected by instrument malfunctions, instrument calibrations or power failures.  For more information please visit the ministry's Air Quality Monitoring page or contact the Ministry of Environment Inquiry Centre: centre.inquiry@gov.sk.ca 1-800-567-4224  

The Ministry of Environment operates a network of continuous ambient air monitoring stations to measure the concentration of air pollutants across Saskatchewan. This is considered 'raw data' that has not undergone quality control and quality assurance. 'Raw data' is not intended to provide medical or health care advice and should not be used in published documents. For best results download the entire dataset without filtering as a CSV. ‘Date and time’ as displayed is your local time. However, downloaded data is in UTC for ‘Date and time’. Any values of -9999, -999, or 9980 are invalid data.The Ministry of Environment operates a network of continuous ambient air monitoring stations. These stations are part of the National Air Pollution Surveillance (NAPS) network. Continuous ambient air monitoring stations measure the concentration of air pollutants across Saskatchewan. The data is used to:  • track and report on progress for achieving air quality objectives • measure representative pollutant concentrations and determine long-term trends and • provide air quality information to the public Air pollutants typically come from various industrial activity and natural sources, such as mining, oil and gas, agriculture, forest fires, electrical generation, and the transportation sector. Disclaimer: Hourly data contained on this website is automatically updated daily from Saskatchewan Ministry of Environment monitoring stations and is intended for informational purposes only. This is considered ‘raw data’ and may contain errors. 'Raw data' is not intended to provide medical or health care advice and should not be used in published documents. Data integrity and validity may be affected by instrument malfunctions, instrument calibrations or power failures.  For more information please visit the ministry's Air Quality Monitoring page or contact the Ministry of Environment Inquiry Centre: centre.inquiry@gov.sk.ca 1-800-567-4224  

Hotspots represent active wildfires. Natural Resources Canada Canadian Wild Fire Information System identifies them by processing Infrared satellite images. This layer contains the hotspots that are selected to be used as input for the Regional Air Quality Deterministic Prediction System FireWork (RAQDPS-FW) to enable forecasting air quality while taking into account wildfire emissions. Geographical coverage is Canada and the United States. The products are presented as historical annual compilations which highlight long-term trends in cumulative effects on the environment.

Regional Deterministic Air Quality Analysis (RDAQA) is an objective analysis of surface pollutants that combines numerical forecasts from the Regional Air Quality Deterministic Prediction System (RAQDPS) with hourly observations from various monitoring networks in North America, including the Canadian measurement networks operated by the provinces, territories and certain cities, as well as the various American networks in the context of the AIRNow program administered by US/EPA (US Environmental Protection Agency). RDAQA analysis provides the best description of current air quality conditions, and is used to inform the public, meteorologists in the various Environment and Climate Change Canada forecasting offices, Health Canada and other users about the distribution of air pollutants near the ground, and the performance of forecasting models. Each hour, a preliminary product is available approximately one hour after the observation measurement time, while final and Firework products are available approximately two hours after the measurement time. The preliminary and final products contain analysis of the chemical constituents O3, SO2, NO, NO2, PM2.5 (fine particles with diameters of 2.5 micrometers or less) and PM10 (coarse particles with diameters of 10 micrometers or less), while the Firework product contains analysis of PM2.5 and PM10.

The Canadian Environmental Sustainability Indicators (CESI) program provides data and information to track Canada's performance on key environmental sustainability issues. The Air quality indicators track ambient concentrations of fine particulate matter, ground-level ozone, sulphur dioxide, nitrogen dioxide, and volatile organic compounds at the national, regional and urban levels and at local monitoring stations. The national and regional indicators are presented with their corresponding Canadian Ambient Air Quality Standard when available. Canadians are exposed to air pollutants on a daily basis, and this exposure can cause adverse health and environmental effects. Information is provided to Canadians in a number of formats including: static and interactive maps, charts and graphs, HTML and CSV data tables and downloadable reports. See the supplementary documentation for the data sources and details on how the data were collected and how the indicator was calculated.Canadian Environmental Sustainability Indicators: https://www.canada.ca/environmental-indicators

This dataset contains the validated hourly results of the [Air Quality Index (AQI)] (https://www.iqa.environnement.gouv.qc.ca/contenu/index.asp) and its sub-indices for each station in the [Quebec Air Quality Monitoring Network (RSQAQ)] (https://www.environnement.gouv.qc.ca/air/reseau-surveillance/Carte.asp).The results of the stations in the city of Montreal are not included. To obtain them, consult the dataset [RSQA - air quality index (historical)] ([measured on the island of Montreal] (https://www.donneesquebec.ca/recherche/dataset/vmtl-rsqa-polluants-gazeux)).The IQA is an information and awareness tool designed to inform the population about the quality of ambient air in Quebec.If you have any questions about this data, contact the Info-Air department:.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**