The Representative Area Ecological Reserves Regulations are part of the Protected Lands of Saskatchewan.The Representative Area Ecological Reserves Regulations are part of the Protected Lands System of Saskatchewan. Selected to represent specific enduring features (specific soil attribute combinations based on soil development, parent material, surface form, slope derived from the Soil Landscapes of Canada, Saskatchewan database, Version 2.1). Areas set to protect ecologically representative areas of Saskatchewan's ecoregions.

The OIC's shown are current for each Development Area Boundary. Each has it's original Order in Council (OIC) as well as the most current OIC if there was a change in boundary. Zoning is contained within all Development Area Boundaries.Each Development Area Boundary maintains parcels with unique zoning designations. These zoning designations are found in the layer: CSW_LAND_TENURE.LP_ZONING_POLY_50KDistributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This layer shows surveyed parcels that fall under the Agricultural Development Area Regulations or are within an agricultural zone as defined in one of the Development Area Regulations ( [Find zoning maps for Yukon communities \| Government of Yukon](https://yukon.ca/en/find-zoning-maps-yukon-communities) ). The field "Title Description" indicates if the parcels is titled to private, a government entity (commissioner, community or federal) or untitled. If you find any errors in the dataset please contact [lands.gis@yukon.ca](mailto:lands.gis@yukon.ca) Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca) 

These polygons represent areas across the Province where motor vehicles are prohibited or restricted year round or seasonally. These areas were created as a visual representation of the Wildlife Act Motor Vehicle Prohibition Regulations. Under the Motor Vehicle Prohibition Regulation of the provincial Wildlife Act, motor vehicle use on crown land in B.C. may be prohibited or restricted. This data is a summary of the Motor Vehicle Prohibition Regulations, and is intended for general information purposes only. Where there is a discrepancy between these maps and the Regulations, the Motor Vehicle Prohibition Regulations are the final authority. Motor Vehicle Prohibitions (MVP) are put in place for a variety of reasons. MVPs can be used to: * protect habitat * reduce disturbance and displacement of wildlife * provide areas for hunters on foot, bike or horseback to hunt without motorized vehicles present * reduce hunter harvest while maintaining hunting opportunity   Motor vehicles include but are not limited to: * vehicles * ATVs/UTVs * snowmobiles * motorcycles * electric bikes   For full definitions and detailed regulations, visit the Motor Vehicle Prohibition Regulations website (available under Related Links). There are 2 types of motor vehicle restrictions under the Wildlife Act, and all types can be seasonal or year-round. 1. **Motor Vehicle Closed Area** (formerly referred to as Access Management Areas (AMAs): Prohibits the use or operation of a motor vehicle and e-bike. These prohibitions can be for all motor vehicles, or specific to ATVs/e-bikes or snowmobiles. 2. **Motor Vehicle Hunting Closed Area**: The operation of motor vehicles and e-bikes to hunt, transport wildlife, transport equipment and supplies which are intended for or in support of hunting, or transport hunters to and from the location of wildlife is prohibited. These prohibitions can apply to all motor vehicles, or be specific to ATVs/e-bikes or snowmobiles.

This file is made up of several types of boundaries being Municipal, Development Area Regulations, Land Claims Final Agreement, Self Government Agreement, Memorandum of Understanding, Local Area Plans, and Community Plans. Some areas have more than one boundary for different purposes. The boundaries chosen and shown here are the most current from our inventory.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

TA_CROWN_DVLOPMNT_AGRMNTS_SVW contains the spatial representation (polygon) of active and applied for Land Act Development Agreements. Development Agreements allow for use of Crown Land for development with conditions for future purchase of base lands or tenure of property. The view was created to provide a simplified presentation of this single tenure type from the disposition information in the Tantalis operational system. The same content could be derived from the TA_CROWN_TENURES_SVW by filtering to this tenure type only

This the data for the Winnipeg AVPA Regulation's interactive web map. It contains two polygon datasets that help users determine whether a property is affected by requirements in the regulation and a point dataset to help users navigate to propertiesThis is the data for the Winnipeg Airport Vicinity Protection Area Regulation's interactive web map. It was developed to help interested parties determine whether a property is affected by the Airport Vicinity Protection Area Regulation. To protect and foster the airport’s operations and continued growth, while ensuring orderly and efficient development within Winnipeg, the Province has adopted an Airport Vicinity Protection Area Regulation under The City of Winnipeg Charter. The regulation defines two protection areas called "Area 1" and "Area 2".These areas provide direction on where and what type of residential development may take place near the airport. Area 1 comprises of lands immediately adjacent to the airport, where no new residential development will be permitted, except for replacement of buildings and minor infilling. Area 2 is located further away from the airport, where new or replacement residential development may be constructed. All development within the regulated lands must comply with indoor noise level limits set out in the Regulation.  The parcel boundaries in this interactive map are representations of parcels as defined by plan of subdivision or plan of survey registered at the Land Titles Office. This type of property boundary was chosen because the land division in these plans is used to define property ownership in Manitoba.

This the data for the Winnipeg AVPA Regulation's interactive web map. It contains two polygon datasets that help users determine whether a property is affected by requirements in the regulation and a point dataset to help users navigate to propertiesThis is the data for the Winnipeg Airport Vicinity Protection Area Regulation's interactive web map. It was developed to help interested parties determine whether a property is affected by the Airport Vicinity Protection Area Regulation. To protect and foster the airport’s operations and continued growth, while ensuring orderly and efficient development within Winnipeg, the Province has adopted an Airport Vicinity Protection Area Regulation under The City of Winnipeg Charter. The regulation defines two protection areas called "Area 1" and "Area 2".These areas provide direction on where and what type of residential development may take place near the airport. Area 1 comprises of lands immediately adjacent to the airport, where no new residential development will be permitted, except for replacement of buildings and minor infilling. Area 2 is located further away from the airport, where new or replacement residential development may be constructed. All development within the regulated lands must comply with indoor noise level limits set out in the Regulation.  The parcel boundaries in this interactive map are representations of parcels as defined by plan of subdivision or plan of survey registered at the Land Titles Office. This type of property boundary was chosen because the land division in these plans is used to define property ownership in Manitoba.

This the data for the Winnipeg AVPA Regulation's interactive web map. It contains two polygon datasets that help users determine whether a property is affected by requirements in the regulation and a point dataset to help users navigate to propertiesThis is the data for the Winnipeg Airport Vicinity Protection Area Regulation's interactive web map. It was developed to help interested parties determine whether a property is affected by the Airport Vicinity Protection Area Regulation. To protect and foster the airport’s operations and continued growth, while ensuring orderly and efficient development within Winnipeg, the Province has adopted an Airport Vicinity Protection Area Regulation under The City of Winnipeg Charter. The regulation defines two protection areas called "Area 1" and "Area 2".These areas provide direction on where and what type of residential development may take place near the airport. Area 1 comprises of lands immediately adjacent to the airport, where no new residential development will be permitted, except for replacement of buildings and minor infilling. Area 2 is located further away from the airport, where new or replacement residential development may be constructed. All development within the regulated lands must comply with indoor noise level limits set out in the Regulation.  The parcel boundaries in this interactive map are representations of parcels as defined by plan of subdivision or plan of survey registered at the Land Titles Office. This type of property boundary was chosen because the land division in these plans is used to define property ownership in Manitoba.

This the data for the Winnipeg AVPA Regulation's interactive web map. It contains two polygon datasets that help users determine whether a property is affected by requirements in the regulation and a point dataset to help users navigate to propertiesThis is the data for the Winnipeg Airport Vicinity Protection Area Regulation's interactive web map. It was developed to help interested parties determine whether a property is affected by the Airport Vicinity Protection Area Regulation. To protect and foster the airport’s operations and continued growth, while ensuring orderly and efficient development within Winnipeg, the Province has adopted an Airport Vicinity Protection Area Regulation under The City of Winnipeg Charter. The regulation defines two protection areas called "Area 1" and "Area 2".These areas provide direction on where and what type of residential development may take place near the airport. Area 1 comprises of lands immediately adjacent to the airport, where no new residential development will be permitted, except for replacement of buildings and minor infilling. Area 2 is located further away from the airport, where new or replacement residential development may be constructed. All development within the regulated lands must comply with indoor noise level limits set out in the Regulation.  The parcel boundaries in this interactive map are representations of parcels as defined by plan of subdivision or plan of survey registered at the Land Titles Office. This type of property boundary was chosen because the land division in these plans is used to define property ownership in Manitoba.