Represents the gross area boundary within which Saskatchewan Crown resource lands are designated as provincial forests.For the entire Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests, and the southern portion of the Northern Provincial Forest, boundaries follow the textual descriptions found in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020. For the northern, eastern and western portions of the Northern Provincial Forest, boundaries were sourced from the SaskGIS Provincial Boundary data set (ADMINISTRATIVE.provincial_boundary) produced by Information Services Corporation. This data set depicts the provincial boundary of the province of Saskatchewan as reflected in the respective jurisdictional boundary acts, and is kept current on a monthly basis. The version used here has an effective date of 31 May 2020. Crown resource lands contained within these boundaries are designated as provincial forest. Certain lands have been deemed to be withdrawn from the provincial forest pursuant to subsection 12(4) of the Act. The Forest Resources Management Act The Forest Resources Management Regulations

The Georgia Basin Boundary dataset displays the extent of the Georgia Basin Ecosystem Initiative undertaken by the federal, provincial, and municipal governments. The objectives of the project are to support initiatives for clean air, clean water, habitat and species protection, and improved environmental decision-making in the Georgia Basin. The dataset consists of both a polygon layer and line layer

This 1:20,000. scale inventory contains digital maps of cancelled community watershed boundaries. The watershed boundaries showed the location of watersheds that supply communities with domestic water. These are meant to be used in conjunction with stream network map coverages from TRIM mapping. Attribute data for community watersheds can be downloaded into a spreadsheet or database

The Georgia Basin Boundary dataset displays the extent of the Georgia Basin Ecosystem Initiative undertaken by the federal, provincial, and municipal governments. The objectives of the project are to support initiatives for clean air, clean water, habitat and species protection, and improved environmental decision-making in the Georgia Basin. The dataset consists of both a polygon layer and line layer

Yukon Energy Corporation (YEC) Power Lines distribute electrical power from Power Generating Stations to Power Substations. This data was provided by YEC and will be updated when new power lines are constructed.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Base Waterbody Polygon Update is the Alberta Environment and Protected Areas base hydrography polygon dataset, it is an updated of the Base Features Hydro Polygons in Southern Alberta from orthophoto and various sources of provincial base data.

Ecoregions of Yukon, 2014 is an update to the Yukon portion of the 1995 National Ecological Framework (NEF) described in Ecoregions of Yukon (Smith et al 2004). Because of people's familiarity with the 1995 NEF, and its use in management and planning, these ecoregion revisions attempted to retain the 1995 divisions unless there were compelling reasons to change them. In Yukon there were several compelling reasons to revise the 1995 NEF: 1) capitalize on availability of digital inventory and knowledge and improve or adjust the 1995 mapping as necessary, 2) harmonize stratification along jurisdictional borders, 3) incorporate line work updates to the Soil Landscape polygons by Agriculture and AgriFood Canada (AAFC) happening concurrently, and 4) include Yukon revisions in a national update of NEF ecozones across Canada - led by Environment Canada (CCEA 2017).Mapping the ecoregions of Yukon is largely a top-down process and the divisional hierarchy is nested. The lowest level of the hierarchy is the Soil Landscapes of Canada unit (Soil Landscape Component, or SLC). SLCs are organized according to a uniform set of national soil and landscape criteria that are based on permanent natural attributes. SLCs polygons are not published in this release. Ecozones, ecoregions and ecodistricts are subdivisions at the continental scale of climatic zones; attention to physiography increases as map scale increases. There are many reasonable ways to distinguish Yukon ecoregions. Ecoregions are delineated principally on abiotic features, such as bedrock geology, glacial history and physiography, and so are relatively stable (i.e. enduring) over time. While considering changes to the 1995 NEF, the project team continued to recognize major physiographic and climatic distinctions. At the ecozone level the team included a stronger regional climate element and related the ecozone level to the bioclimate framework.The Ecoregions of Yukon concept is used for broad scale management applications. Its structure helps define ecologically relevant management units at various scales. The Ecoregions of the Yukon Territory (Smith et al. 2004) describes Yukon's ecozones and ecoregions represented in the 1995 NEF (ESWG 1995). This reference continues to be a useful and relevant resource the Ecoregions of Yukon, 2014. For a fulsome treatment of the updates in the Ecoregions of Yukon, 2014 please refer to the report "Ecoregions of Yukon: Revisions to the Yukon portion of the National Ecological Framework." (McKenna, K, J. Meikle and N. Flynn 2014).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The National Ecological Framework for Canada's "Land and Water Area by Province/Territory and Ecodistrict” dataset provides land and water area values by province or territory for the Ecodistrict framework polygon, in hectares. It includes codes and their English and French descriptions for a polygon’s province or territory, total area, land-only area and large water body area.

Represents timber supply area and other land use boundaries in the province of Saskatchewan. Timber supply areas are the primary management unit used for the allocation of timber harvest, licensing, forest management planning and harvest volume schedules.The Saskatchewan Ministry of Environment regulates forestry activities on Crown “forest lands” — as defined by The Forest Resources Management Act — using several types of licenses and permits:  Forest Management Agreement (FMA)A forest management agreement is a 20-year agreement, typically with a larger forest company, conferring long-term harvesting rights for a specific volume of timber from a defined area, as well as responsibilities for long-term sustainable forest management. Term Supply Licence (TSL)A term supply licence (TSL) is a licence with a term of up to 10 years, granting rights to harvest specified forest volumes as well as responsibilities for forest management. A TSL may be volume-based or area-based.  Forest Product Permit (FPP)A forest product permit grants the right to harvest specified forest products for a term of up to one year. This permit is also used to regulate other activities, such as grazing in the forest. Land use is classified into three categories:  Commercial ForestAreas within the provincial forest that are available for commercial timber harvest allocation through the use of forest management agreements (FMA), volume-based or area-based term supply licences (TSL), or forest product permits (FPP).  Fringe ForestAreas, generally south of the provincial forest, that contain “forest lands” — as defined by The Forest Resources Management Act. Within the fringe forest, harvest allocations are administered by the Ministry of Environment through the use of forest product permits and volume-based term supply licenses.  Other UsesAreas within the provincial forest that are not available or suitable for forestry activities. These include protected areas and areas generally north of the commercial forest.  For the entire Canwood, Nisbet, Fort a la Corne, Torch River, and Porcupine Provincial Forests, and the southern portion of the Northern Provincial Forest, boundaries follow the textual descriptions found in The Forest Resources Management Regulations, F-19.1 Reg 1, amended June 2020. Commercial forest and fringe forest areas are sub-divided into timber supply areas. Forest Names and Licence Holders are current as of August 31, 2020.

Multi-Agency Ground Plot (MAGPlot) database (DB) is a pan-Canadian forest ground-plot data repository. The database synthesize forest ground plot data from various agencies, including the National Forest Inventory (NFI) and 12 Canadian jurisdictions: Alberta (AB), British Columbia (BC), Manitoba (MB), New Brunswick (NB), Newfoundland and Labrador (NL), Nova Scotia (NS), Northwest Territories (NT), Ontario (ON), Prince Edward Island (PE), Quebec (QC), Saskatchewan (SK), and Yukon Territory (YT), contributed in their original format. These datasets underwent data cleaning and quality assessment using the set of rules and standards set by the contributors and associated documentations, and were standardized, harmonized, and integrated into a single, centralized, and analysis-ready database. The primary objective of the MAGPlot project is to collate and harmonize forest ground plot data and to present the data in a findable, accessible, interoperable, and reusable (FAIR) format for pan-Canadian forest research. The current version includes both historical and contemporary forest ground plot data provided by data contributors. The standardized and harmonized dataset includes eight data tables (five site related and three tree measurement tables) in a relational database schema. Site-related tables contain information on geographical locations, treatments (e.g. stand tending, regeneration, and cutting), and disturbances caused by abiotic factors (e.g., weather, wildfires) or biotic factors (e.g., disease, insects, animals). Tree-related tables, on the other hand, focus on measured tree attributes, including biophysical and growth parameters (e.g., DBH, height, crown class), species, status, stem conditions (e.g., broken or dead tops), and health conditions. While most contributors provided large and small tree plot measurements, only NFI, AB, MB, and SK contributed datasets reported at regeneration plot level (e.g., stem count, regeneration species). Future versions are expected to include updated and/or new measurement records as well as additional tables and measured and compiled (e.g., tree volume and biomass) attributes. MAGPlot is hosted through Canada’s National Forest Information System (https://nfi.nfis.org/en/maps). ------------------------------------------------------LATEST SITE DISTURBANCES LAYER:------------------------------------------------------Shows the most recently recorded disturbance class at each MAGPlot site. These disturbance classes are broad categories, with more detailed disturbance types available in the full dataset.-----------NOTES:----------- The MAGPlot release (v1.0 and v1.1) does not include NL and SK datasets due to pending Data Sharing Agreements, ongoing data processing, or restrictions on third-party sharing. These datasets will be included in future releases. While certain jurisdictions permit open or public data sharing, given that requestor signs and adheres the Data Use agreement, there are some jurisdictions that require a jurisdiction-specific request form to be signed in addition to the Data Use Agreement form. For the MAGPlot Data Dictionary, other metadata, datasets available for open sharing (with approximate locations), data requests (for other datasets or exact coordinates), and available data visualization products, please check all the folders in the “Data and Resources” section below. Coordinates in web services have been randomized within 5km of true location to preserve site integrity.Access the WMS (Web Map Service) layers from the “Data and Resources” section below. A data request must be submitted to access historical datasets, datasets restricted by data-use agreements, or exact plot coordinates using the link below.NFI Data Request Form: https://nfi.nfis.org/en/datarequestform---------------------------------ACKNOWLEDGEMENT:--------------------------------- We acknowledge and recognize the following agencies that have contributed data to the MAGPlot database: Government of Alberta - Ministry of Agriculture, Forestry, and Rural Economic Development - Forest Stewardship and Trade Branch Government of British Columbia - Ministry of Forests - Forest Analysis and Inventory Branch Government of Manitoba - Ministry of Economic, Development, Investment, Trade, and Natural Resources - Forestry and Peatlands Branch Government of New Brunswick - Ministry of Natural Resources and Energy Development - Forestry Division, Forest Planning and Stewardship Branch Government of Newfoundland & Labrador - Department of Fisheries, Forestry and Agriculture - Forestry Branch Government of Nova Scotia - Ministry of Natural Resources and Renewables - Department of Natural Resources and Renewables Government of Northwest Territories - Department of Environment & Climate Change - Forest Management Division Government of Ontario - Ministry of Natural Resources and Forestry - Science and Research Branch, Forest Resources Inventory Unit Government of Prince Edward Island - Department of Environment, Energy, and Climate Action - Forests, Fish, and Wildlife Division Government of Quebec - Ministry of Natural Resources and Forests - Forestry Sector Government of Saskatchewan - Ministry of Environment - Forest Service Branch Government of Yukon - Ministry of Energy, Mines, and Resources - Forest Management Branch Government of Canada - Natural Resources Canada - Canadian Forest Service - National Forest Inventory Projects Office