__Update: The data released by the Directorate of Forest Inventories from 2021 to 2024 (DIF) has been replaced by data produced by the Directorate of Forest Protection from 2025.The link: *Access the data directory* is available in the section*Dataset Description Sheets; Additional Information*__.In 2025, the Forest Protection Directorate of the Ministry of Natural Resources and Forests (MRNF) began producing data that indicate the strength of forest vegetation. To produce the NBR index, the SGRF uses data provided by the Landsat (NASA) and Sentinel-2 (European Space Agency) satellites combined in the integrated satellite product “Harmonized Landsat and Sentinel-2 surface reflectance data set” designed by NASA. These satellite sensors measure light at specific frequencies called spectral bands. The light visible to human eyes corresponds to the red, blue, and green spectral bands as captured by a standard camera or camera. In addition, these satellite sensors offer the advantage of measuring infrared frequencies that are invisible to the human eye, which broadens the possibilities of observing natural phenomena under different characteristics.During the passage of a satellite over Quebec, only a part of Quebec is measured. The waves measured by Landsat and Sentinel-2 are blocked by clouds or by heavy air pollution such as forest fire smoke. Thus, to obtain a complete portrait of the Quebec forest for a given season, it is necessary to combine acquisitions from several different dates. The acquisition period for SGRF products extends from July 15 to September 15. This is a period that optimizes the observation of damage caused by spruce budworm.The products are delivered in the “Québec Lambert” coordinate reference system (EPSG: 32198). In addition, to keep only observations on forest territories, a mask was applied using the “CO_TER = Null” attribute from Quebec's ecoforest mapping as well as a mask to remove forest roads and paths. Because of this product, the DPF also produces DNBr images, pre-epidemic DNBr images, and time series (2014 to present). All documentation can be found in the lisez-moi.pdf file in the “Documentation” section.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Geospatial forest inventory dataset updated for depletions, such as harvesting, and projected annually for growth. Sample attributes in this dataset include: age, species, volume, height. The Vegetation Resources Inventory (VRI) spatial datasets describe both where a vegetation resource (ie timber volume, tree species) is located and how much of a given resource is within an inventory unit. Suggested citation: Forest Analysis and Inventory Branch (2024). VRI - 2024 - Forest Vegetation Composite Rank 1 Layer (R1). British Columbia Data Catalogue. https://catalogue.data.gov.bc.ca/dataset/2ebb35d8-c82f-4a17-9c96-612ac3532d55

An administrative unit of forest land designated by the Minister, as authorized under Section 14(1) of the Forests Act.

High-resolution map of leading tree species distribution for Canada’s forested ecosystems (2019). Leading tree species map produced from a 2019 Landsat image composite, geographic and climate data, elevation derivatives, and remote sensing derived phenology following the framework described in Hermosilla et al. (2022). Regional classification models were generated based on Canada’s National Forest Inventory using a 150x150 km tiling system. The leading tree species are defined by representing the most voted tree species from the Random Forests classification models (i.e. the class with the highest class membership probability).The data represents leading tree species of Canada's forested ecosystems in 2019. An image compositing window of August 1 ± 30 days was used to generate the best-available-pixel (BAP) image composites utilized as source data for the classification.The science and methods developed to generate the information outcomes shown here, that track and characterize the history of Canada’s forests, were led by Canadian Forest Service of Natural Resources Canada, developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS), partnered with the University of British Columbia, augmented by processing capacity from Digital Research Alliance of Canada.For an overview on the data, image processing, and methods applied, as well as information on independent accuracy assessment of the data, see Hermosilla et al. (2022) https://doi.org/10.1016/j.rse.2022.113276When using this data, please cite as: Hermosilla, T., Bastyr, A., Coops, N.C., White, J.C., Wulder, M.A., 2022. Mapping the presence and distribution of tree species in Canada’s forested ecosystems. Remote Sensing of Environment 282, 113276.

Forest Percentage Above 2m 2015Percentage of first returns above 2 m (%). Represents canopy cover. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

Forest Percent Above Mean 2015Percentage of first returns above the mean height (%). It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Represents the canopy cover above mean canopy height. Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

Forest Lorey's Height 2015Lorey's mean height. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Average height of trees weighted by their basal area (m). Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

Forest Elevation(Ht) Stddev 2015Standard deviation of height of lidar first returns (m). Represents the variability in canopy heights. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

Canada's National Forest Inventory (NFI) sampling program is designed to support reporting on forests at the national scale. On the other hand, continuous maps of forest attributes are required to support strategic analyses of regional policy and management issues. We have therefore produced maps covering 4.03 × 106 km2 of inventoried forest area for the 2001 base year using standardised observations from the NFI photo plots (PP) as reference data. We used the k nearest neighbours (kNN) method with 26 geospatial data layers including MODIS spectral data and climatic and topographic variables to produce maps of 127 forest attributes at a 250 × 250 m resolution. The stand-level attributes include land cover, structure, and tree species relative abundance. In this article, we report only on total live aboveground tree biomass, with all other attributes covered in the supplementary data (http://nrcresearchpress.com/doi/suppl/10.1139/cjfr-2013-0401). In general, deviations in predicted pixel-level values from those in a PP validation set are greater in mountainous regions and in areas with either low biomass or sparse PP sampling. Predicted pixel-level values are overestimated at small observed values and underestimated at large ones. Accuracy measures are improved through the spatial aggregation of pixels to 1 km2 and beyond. Overall, these new products provide unique baseline information for strategic-level analyses of forests (https://nfi.nfis.org)Collection:- **[Canada's National Forest Inventory (NFI) 2006](https://open.canada.ca/data/en/dataset/e2fadaeb-3106-4111-9d1c-f9791d83fbf4)**

Forest Gross Stem Volume 2015Gross stem volume. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Individual tree gross volumes are calculated using species-specific allometric equations. In the measured ground plots, gross total volume per hectare is calculated by summing the gross total volume of all trees and dividing by the area of the plot (units = m3/ha). Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011