PURPOSE:To record hourly water temperatures throughout the Margaree watershed.DESCRIPTION:The Department of Fisheries and Oceans (DFO) has been deploying water temperature monitoring equipment since spring 1993 in the Margaree River watershed. Coverage has changed throughout the time series and there is little documentation regarding equipment used. In recent years data have been collected using VEMCOs. USE LIMITATION:To ensure scientific integrity and appropriate use of the data, we would encourage you to contact the data custodian.

The First Nations geographic location dataset contains the geographic location of First Nations (groups and subgroups) in Canada as points as well as basic attributes data. The location identifies where the First Nations live. Each First Nation point represents its administrative office address as it is registered in Indigenous Services Canada (ISC) Band Governance Management System (BGMS). When the First Nation administrative office is located outside its associated most populated reserve boundary, adjustments are made to relocate the point within its boundaries, otherwise within the boundaries of another associated reserve or the city where the administrative office is located. When the administrative office or the First Nation is impossible to locate, the location is based on the best available information on the First Nation (e.g. official First Nation Web site). A connection with the BGMS is in place to ensure that any update to the system is reflected in the attributes data associated with the location of each First Nation.This dataset is Crown-Indigenous Relations and Northern Affairs Canada (CIRNAC) and Indigenous Services Canada (ISC) official source for First Nation geographic location on maps.

The Planning for an Environmental Response (PIER) initiative falls under the umbrella of the Government of Canada's Oceans Protection Plan (OPP), whose goal is preserving marine ecosystems vulnerable to increased transportation and the development of the marine industry (https://pm.gc.ca/en/news/backgrounders/2016/11/07/canadas-oceans-protection-plan-preserving-and-restoring-canadas). The PIER was established in response to recommendations made in a 2013 report "A review of Canada's ship-source spill preparedness and response regime " by the Tanker Safety Expert Panel (https://tc.canada.ca/en/marine-transportation/marine-safety/tanker-safety-expert-panel). One of the recommendations calls on Fisheries and Oceans (DFO) to work with Environment and Climate Change Canada (ECCC) to collect and compile information on sensitive species and environments for each Canadian Coast Guard (CCG) response area and make it publicly available.The PIERs’ main mandate is to acquire and update biological sensitivity data under its jurisdiction for preparation and response purposes in the event of an oil spill. With DFO-Science, PIER supports ECCC's National Environmental Emergencies Centre (NEEC) and the CCG in their preparations and responses through the sharing of data on biological sensitivities, the development of response tools and expert advice.In this vein, DFO published an analysis in 2018 that aimed to identify the most vulnerable components of the St. Lawrence in order to prioritize them during data collection if gaps were identified (Desjardins et al. 2018). This exercise highlighted the vulnerability of several biological components and important data gaps, particularly in coastal areas. As a result of this finding, the Quebec region PIEI team embarked on a collaborative project with the Université du Québec à Rimouski (UQAR) to map eelgrass beds, tidal marshes and macroalgal beds. In consultation with other DFO-Science data producers, this team has also created datasets adapted for response purposes, notably regarding bivalves and marine mammals. These layers may be used for oil spill preparedness and response by DFO-Quebec Region's Environmental Incident Coordinator, NEEC and CCG. Several of them, deemed relevant in the first 72 hours following a spill, have been transmitted to the NEEC.

This product provides the ratio of surface freshwater intake to water yield for August 2013, with the exception of drainage regions 7, 8, 16, 17 and 18, which use the ratio of August intake to the long-term minimum monthly water yield. Surface freshwater intake aggregates data from the Survey of Drinking Water Plants, 2013 and the Industrial Water Use Survey, 2013 with estimates of agricultural water use for 2013 based on the Agricultural Water Use Survey and the Alberta Irrigation Information report. Data for water use by the oil and gas industry and households not supplied by a public water provider are also excluded.

This collection of eelgrass data has been collated to produce a national map of the location and distribution of eelgrass beds across Canada. The data providers collaborating in this initiative include Federal, Provincial and Municipal government departments and agencies, academia, non-governmental organizations, community groups, private sector, Indigenous groups and independent science organizations. The National Eelgrass Task Force (NETForce) is a collaborative, diverse and inclusive partnership of scientists, managers, and stakeholders working towards a concrete vision which is to create a national map of eelgrass distribution in Canada that is publicly accessible, dynamic, and useful for monitoring and collective decision-making. The eelgrass data were collected using various mapping techniques including species distribution models, benthic sonar, field measurements of habitat presence or absence, video transects, aerial photography, field validation, literature review, satellite imageries, LiDAR, Airborne spectrographic imaging, and Unoccupied Aerial Vehicle (UAV). The metadata provided by the partners relevant for their own projects and the field names were made similar for the compiled dataset. We also created additional fields that differentiated the datasets, and these include data provider, institution code, water body, mapping techniques, province, biogeographic region, eelgrass observation... Other fields are included depending on the original metadata provided by the data provider (i.e. eelgrass percentage cover, eelgrass density, map reference, image classification technique). The data span from 1987 to present, with some eelgrass beds being surveyed only once while others were sampled across several years. Uncertainty information associated with a dataset is included in the metadata when available. This map is intended to be evergreen and more eelgrass data will be added when available. This compiled dataset has been collected by many organizations for different purposes, using different survey techniques and different methodologies and, therefore, considerable care must be taken when using these data. For further information concerning specific datasets contact the data provider/institution and/or see the associated technical report (if available) included in the Report folder under the ‘Data and Resources’ section.This group of eelgrass data has been divided using the geographic boundaries of the Federal Marine Bioregions (https://open.canada.ca/data/en/dataset/23eb8b56-dac8-4efc-be7c-b8fa11ba62e9). The title of each geodatabase (FGDB/GDB) contains the name of the bioregion.The Data Dictionary guide provides the fields description (English and French) from each layer included in the geodatabases.For additional information please see:Gomez C., Guijarro-Sabaniel J., Wong M. 2021. National Eelgrass Task (NET) Force: engagement in support of a dynamic map of eelgrass distribution in Canada to support monitoring, research and decision making. Can. Tech. Rep. Aquat. Sci. 3437: vi + 48 p. https://waves-vagues.dfo-mpo.gc.ca/library-bibliotheque/4098218x.pdfGuijarro-Sabaniel, J., Thomson, J. A., Vercaemer, B. and Wong, M. C. 2024. National Eelgrass Task Force (NETForce): Building a dynamic, open eelgrass map for Canada. Can. Tech. Rep. Fish. Aquat. Sci. 3583: v + 31 p. https://waves-vagues.dfo-mpo.gc.ca/library-bibliotheque/41223147.pdf

Fisheries and Oceans Canada (DFO) conducts an annual summer multidisciplinary scientific survey with a bottom trawl in the Estuary and the northern Gulf of St. Lawrence since 1984. Over the years this survey has been conducted on four vessels: the MV Lady Hammond (1984-1990), the CCGS Alfred Needler (1990-2005), the CCGS Teleost (2004-2022) and the CCGS Cabot (2022-present). It is important to note that the objectives, the methods used and the identification of the species during these surveys have improved over time in response to DFO requests and mandates. The data are therefore not directly comparable between these surveys. However, comparative analyses have been carried out between vessels, and conversion factors are available on request for a number of species. The specificities of the missions onboard the CCGS Teleost are described below.Objectives:1. Assess groundfish and northern shrimp population abundance and condition2. Assess environmental conditions3. Conduct a biodiversity inventory of benthic and demersal megafauna 4. Assess phytoplankton and mesozooplankton abundance5. Monitor the pelagic ecosystem6. Inventory marine mammals populations7. Inventory seabirds populations8. Collect samples for various research projectsSurvey descriptionThe survey covers the Estuary and the northern Gulf of St. Lawrence, that is the divisions 4R, 4S and the northern part of division 4T of the Northwest Atlantic Fisheries Organization (NAFO). Since 2008, coverage of division 4T has been increased in the upstream part of the Lower Estuary in order to sample the depths between 37 and 183 m. A stratified random sampling strategy is used for this survey and the area of the study area is 118,587 km². The fishing gear used on the CCGS Teleost is a four-sided Campelen 1800 shrimp trawl equipped with a Rockhopper footgear (“bicycle”). The trawl lengthening and codend are equipped with a 12.7-mm knotless nylon lining. Standard trawling tows last 15 minutes, starting from the time the trawl touches the sea floor. The target towing speed is 3 knots.DataFor each fishing tow, the catch is sorted and weighed by taxa; individuals are then counted and biological data are collected on a subsample. For fish, crab and squid, size and weight are measured by individual and, for some species, sex, gonad maturity, and the weight of certain organs (stomach, liver, gonads) are also evaluated. The soft rays of the anal fin are counted for redfish, and the otoliths are sampled for several species such as Atlantic cod, Atlantic halibut, Greenland halibut, and witch flounder. A roughly 2-kg shrimp sample is sorted and weighed by species (and by stage of maturity for northern shrimp). The shrimps are measured individually. The other invertebrates are counted (no individual measurements) and photographed.The biological data are divided into 4 files: a “Metadata” file containing set information, a “Catches” file containing catches per set for fish taxa, a “Biological characteristics” file containing morphometric measurements per individual and a “Shrimps” file containing information on shrimp catches. This data is also available via the 'Biodiversity' application on the St. Lawrence Global Observatory (SLGO).It's important to note that this is raw data. Only set considered successful are retained. In each set, all species are kept, with a few exceptions. For more information please contact the data management team (gddaiss-dmsaisb@dfo-mpo.gc.ca).

The High Resolution Digital Elevation Model (HRDEM) product is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The complete coverage of the Canadian territory is gradually being established. It includes a Digital Terrain Model (DTM), a Digital Surface Model (DSM) and other derived data. For DTM datasets, derived data available are slope, aspect, shaded relief, color relief and color shaded relief maps and for DSM datasets, derived data available are shaded relief, color relief and color shaded relief maps.The productive forest line is used to separate the northern and the southern parts of the country. This line is approximate and may change based on requirements. In the southern part of the country (south of the productive forest line), DTM and DSM datasets are generated from airborne LiDAR data. They are offered at a 1 m or 2 m resolution and projected to the UTM NAD83 (CSRS) coordinate system and the corresponding zones. The datasets at a 1 m resolution cover an area of 10 km x 10 km while datasets at a 2 m resolution cover an area of 20 km by 20 km. In the northern part of the country (north of the productive forest line), due to the low density of vegetation and infrastructure, only DSM datasets are generally generated. Most of these datasets have optical digital images as their source data. They are generated at a 2 m resolution using the Polar Stereographic North coordinate system referenced to WGS84 horizontal datum or UTM NAD83 (CSRS) coordinate system. Each dataset covers an area of 50 km by 50 km. For some locations in the north, DSM and DTM datasets can also be generated from airborne LiDAR data. In this case, these products will be generated with the same specifications as those generated from airborne LiDAR in the southern part of the country.The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013), which is now the reference standard for heights across Canada.Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The tiles are aligned within each project.The product High Resolution Digital Elevation Model (HRDEM) is part of the CanElevation Series created in support to the National Elevation Data Strategy implemented by NRCan. Collaboration is a key factor to the success of the National Elevation Data Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.

The Beaufort Sea and Mackenzie Delta dataset comes from the Petroleum and Environmental Management Tool (PEMT). The online tool was decommissioned in 2019 and the data was transferred to Open Data in order to preserve it.The PEMT was originally developed in 2009 to help guide development in the Canadian Arctic by Indian and Northern Affairs Canada (INAC). The online tool mapped the sensitivities of a variety of Arctic features, ranging from whales to traditional harvesting, across the Arctic. The tool was intended to aid government, oil and gas companies, Aboriginal groups, resource managers and public stakeholders in better understanding the geographic distribution of areas which are sensitive for environmental and socio-economic reasons. The study area and analytical resolution was defined using the oil and gas leasing grid within the Beaufort Sea. The study area has been the scene of oil and gas exploration activity since 1957. Oil was first discovered at Atkinson Point in 1969 and major gas fields in the early 1970s. Such finds spurred the proposal of the Mackenzie Valley Pipeline in 1974 and the addition of exploration and investment offshore. Exploration and drilling continued both onshore and offshore until the mid-1970s with the release of the Berger Report, which recommended a 10-year moratorium on the construction of the pipeline. After the release of the Berger Report, the pace of onshore activity declined but offshore exploration escalated in the 1980s. Offshore exploration was facilitated with innovative operating techniques and new offshore platforms that extended the ability to operate in the short open-water season and ice. With the minor exception of the small onshore gas field at Ikhil, no oil or gas has been commercially produced in the area.DISCLAIMER: Please refer to the PEMT Disclaimer document or the Resource Constraints - Use Limitation in the Additional Information section below.Note: This is one of the 3 (three) datasets included in the PEMT application which includes the High Arctic and Eastern Arctic datasets.

The High Arctic dataset comes from the Petroleum and Environmental Management Tool (PEMT). The online tool was decommissioned in 2019 and the data was transferred to Open Data in order to preserve it.The PEMT was originally developed in 2009 to help guide development in the Canadian Arctic by Indian and Northern Affairs Canada (INAC). The online tool mapped the sensitivities of a variety of Arctic features, ranging from whales to traditional harvesting, across the Arctic. The tool was intended to aid government, oil and gas companies, Aboriginal groups, resource managers and public stakeholders in better understanding the geographic distribution of areas which are sensitive for environmental and socio-economic reasons. The study area is located in the High Arctic Archipelago and contains both marine and terrestrial components. The boundaries of the study area are based on the NOGB leasing grids applied in the High Arctic, under which exploration, significant discovery and production licenses may be issued. The Sverdrup Basin (and Lancaster Sound) has the highest known oil and gas potential of the sedimentary basins of the Arctic Islands (Nunavut Planning Commission 2000) and it is expected that there is oil and gas potential on Melville Island and Bathurst Island (Sivummut Economic Development Strategy Group 2003). To date, no gas has been produced, and 321,470 m³ of oil has been produced from the Bent Horn oil field (Morrell et al. 1995). DISCLAIMER: Please refer to the PEMT Disclaimer document or the Resource Constraints - Use Limitation in the Additional Information section below.Note: This is one of the 3 (three) datasets included in the PEMT application which includes the Beaufort Sea and Mackenzie Delta and Eastern Arctic datasets.

The Eastern Arctic dataset comes from the Petroleum and Environmental Management Tool (PEMT). The online tool was decommissioned in 2019 and the data was transferred to Open Data in order to preserve it.The PEMT was originally developed in 2009 to help guide development in the Canadian Arctic by Indian and Northern Affairs Canada (INAC). The online tool mapped the sensitivities of a variety of Arctic features, ranging from whales to traditional harvesting, across the Arctic. The tool was intended to aid government, oil and gas companies, Aboriginal groups, resource managers and public stakeholders in better understanding the geographic distribution of areas which are sensitive for environmental and socio-economic reasons. The study area is located east of Baffin Island, Nunavut and encompasses marine habitat in Baffin Bay and Davis Strait. The boundaries of the study area are based on NOGB leasing grids applied in the Eastern Arctic, under which exploration and production licenses may be issued. Although portions of the study area hold high oil and gas potential and several small oil fields and substantial reserves of gas have been found since the 1960s in the north Baffin region, exploration for oil and gas has been limited to seismic operations and geological field work.DISCLAIMER: Please refer to the PEMT Disclaimer document or the Resource Constraints - Use Limitation in the Additional Information section below.Note: This is one of the 3 (three) datasets included in the PEMT application which includes the Beaufort Sea and Mackenzie Delta and High Arctic datasets.