This data contains the memorials and monuments located in communities across the country. Currently, more than 8,000 memorials are included in this data. This data is regularly updated as we continue to receive information on Canadian military memorials.

Geographic bathymetric grid data at 100 m x 100 m pixel resolution.Datum: WGS84Collaboration of Canada, the United States of America and the European Union as part of the Atlantic Ocean Research Alliance's second project under the Galway Statement. Project mapped the North Atlantic seafloor along a transect from Halifax, Canada to Tromsø, Norway to further the understanding of marine habitats, conservation and navigation. Chief Scientist / Primary Investigator name: Paola Travaglini Platform: CCGS Louis S. St- Laurent (Canadian heavy icebreaker)Device 1 type: Multibeam echo-sounder (sonar)Device 1 manufacturer: Kongsberg Device 1 model: EM122, hull installed behind ice protection window Data and Data format:100 m resolution grid of bathymetryBAG format: Bathymetric Attributed Grid ObjectNavigation and positioning: Trimble GNSS receiver + antennas Applanix POS/MV v5 inertial measuring system Horizontal Datum: WGS84 (G1762) Tidal correction:Zero tide applied: tides are not well known for the major part of the data and tides over very deep water are generally negligible. Sound Velocity Profile measurements:In-situ sound velocity profiles were applied.Note on accuracy/S-44 survey standards:Considering the intended output from this survey (IHO Order 1a - Areas shallower than 100 metres where under-keel clearance is less critical but features of concern to surface shipping may exist.) and using an average depth of 2000m as ‘d’ in the IHO Standard Equation - the allowable Total Vertical Uncertainty (TVU) must be < 26m which indeed the data has achieved (by comparison with overlapping datasets from other surveys/agency data).IHO Order 1aHorizontal positioning accuracy: 5.0 m + 5% of depth (95% Confidence level)(~105 m at a mean depth of 2000 m)Vertical positioning accuracy: 2.5 m < 26 m = Sqrt((0.5 m)^2+(0.013 x 2000 m)^2)

Geographic bathymetric grid data at 100 m x 100 m pixel resolution. Datum: WGS84Collaboration of Canada, the United States of America and the European Union as part of the Atlantic Ocean Research Alliance's fifth project under the Galway Statement. Project mapped the North Atlantic seafloor along a transect from Halifax, Canada to Tromsø, Norway to further the understanding of marine habitats, conservation and navigation. Chief Scientist / Primary Investigator name: Paola Travaglini Platform: CCGS Louis S. St- Laurent (Canadian heavy icebreaker)Device 1 type: Multibeam echo-sounder (sonar)Device 1 manufacturer: Kongsberg Device 1 model: EM122 behind an ice protection window Data and Data format:100 m resolution grid of bathymetryBAG format: Bathymetric Attributed Grid ObjectNavigation and positioning: Trimble GNSS receiver + antennae Applanix POS/MV v5 inertial measuring system Horizontal Datum: WGS84 (G1762) Tidal correction:Zero tide applied: tides are not well known for the major part of the data and tides over very deep water are generally negligible. Sound Velocity Profile measurements:In-situ sound velocity profiles were applied.Note on accuracy/S-44 survey standards:Considering the intended output from this survey (IHO Order 1a - Areas shallower than 100 metres where under-keel clearance is less critical but features of concern to surface shipping may exist.) and using an average depth of 2000 m as ‘d’ in the IHO Standard Equation - the allowable Total Vertical Uncertainty (TVU) must be < 26m which indeed the data has achieved (by comparison with overlapping datasets from other surveys/agency data).IHO Order 1aHorizontal positioning accuracy: 5.0 m + 5% of depth (95% Confidence level)(~105 m at a mean depth of 2000 m)Vertical positioning accuracy: 2.5 m < 26.0 m = Sqrt((0.5 m)^2+(0.013 x 2000 m)^2)

The Forest Protection Department of the Ministry of Natural Resources and Forests has produced a matrix layer representing the potential for the intensity and spread of forest fires in Quebec. This data is the result of the annual analysis of the distribution of forest fuels at a local territorial scale, integrating data from the ecoforest map and knowledge on the Canadian Method for Predicting Forest Fire Behaviour (MCPCI).This matrix layer (raster), with a spatial resolution of 25 m x 25 m, covers the whole of Quebec and is broadcast by fire regime for its southern portion (south of the 52nd parallel). The legend has six classes of potential for intensity and spread: extreme, high, considerable, moderate, low, and lack of forest fuel. This card does not inform the user about the probability of ignition, but about the potential for the intensity and spread of a fire if an ignition occurs. Thus, the probability of starting a fire depends on other factors such as weather, fuel humidity, season, etc.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The annual maximum and minimum daily data are the maximum and minimum daily mean values for a given year.

The annual maximum and minimum instantaneous data are the maximum and minimum instantaneous values for a given year.

Matrix representation of surface materials by RVBI aerial photographs. Identification of vegetated and mineralized areas for the purposes of planning and management of the territory.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

A cross-country summary of the averages and extremes for the month, including precipitation totals, max-min temperatures, and degree days. This data is available from stations that produce daily data.

Maximum Temperature represents the highest recorded temperature value (°C) at each location for a given time period. Time periods include the previous 24 hours and the previous 7 days from the available date where a climate day starts at 0600UTC.

The assessments layer represents all assessments undertaken under the Impact Assessment Act, including those that continue under the provisions of the Canadian Environmental Assessment Act, 2012. It includes assessments undertaken by the Impact Assessment Agency and other federal authorities as posted on the Canadian Impact Assessment Registry Internet site. The location of a given assessment included in the dataset is approximate and is based on information submitted by proponents, if applicable. More than one location may be identified for a given assessment. This dataset does not include information related to the footprint.Additional information about this dataset is available on the Canadian Impact Assessment Registry Internet site.