This geospatial data depicts the Draft Offshore Wind Licencing Areas (Draft Areas) recommended by the Committee for the Regional Assessment of Offshore Wind Development in Newfoundland and Labrador (Committee).*Based on work completed to date, the Committee has found the Draft Areas are where offshore wind development would have the least impact within the Regional Assessment Focus Area. Identifying Areas:Section 6 of the Draft Regional Assessment Report (see Data Resources below) includes details on how the Draft Areas were identified. They are the result of the constraints analysis summarized below, with very little modification to area boundaries. The Committee successively removed areas from the Regional Assessment Focus Area (published on Open Government by the Impact Assessment Agency on December 1, 2023). Constraints analysis steps included: • Step 1: Creating Coastal Buffers.• Step 2: Removing Marine Critical Habitat.• Step 3: Removing Marine Protected Areas. • Step 4: Removing Marine Traffic Routes.• Step 5: Removing Areas with High Vessel Traffic.• Step 6: Removing the South Coast Fjords NMCA Study Area.• Step 7: Removing Areas around National Parks & World Heritage Sites.• Step 8: Removing High Density Fishing Areas.• Step 9: Removing Community-based Coastal Resources.An Iterative Process:Identifying offshore wind licencing areas is an iterative process. On March 22, 2024, the Committee submitted its Interim Report to Ministers. This report included a preliminary map of recommended areas for offshore wind development licencing. The preliminary areas were updated based on engagement outcomes, additional data and analysis submitted to the Committee by Regional Assessment participants, and additional research and analysis completed by the Committee between March and October 2024. On October 1, 2024, the Committee’s Draft Report, including updated offshore wind areas, was published for a public comment period. The Draft Areas supersede the Preliminary Offshore Wind Licencing Areas. The Draft Areas are also subject to change. The Committee will submit its Final Report and Initial Offshore Wind Licencing Areas for Consideration to Ministers on or before January 23, 2025. The Committee recommends that regulators consider the forthcoming Initial Offshore Wind Energy Licencing Areas, and the Committee’s report to Ministers, to help inform offshore wind development licencing areas in the region.Latest Update:The Committee’s Final Report and final version of Initial Offshore Wind Energy Licencing Areas for Consideration were submitted to Ministers on January 23, 2025. This completes the Committee’s mandate. Ministers may also choose to make the final versions of these areas available following the Regional Assessment. However, no changes have been made to the geospatial data representing the Draft Areas (published here).Please note the Committee updated the term “Initial Offshore Wind Energy Licencing Areas for Consideration” in the final iteration of their work to better communicate the areas it identified are not licencing areas but are a starting point to help inform the selection of licencing areas. Previous iterations of these areas were called Preliminary Offshore Wind Licencing Areas and Draft Offshore Wind Licencing Areas.*Regional Assessment Background: The federal Ministers of Environment and of Natural Resources, and the provincial Ministers of Industry, Energy and Technology, of Environment and Climate Change, and of Intergovernmental Affairs (Ministers) are signatory to the Regional Assessment Agreement. The goal of the Regional Assessment is to provide information to federal and provincial governments to help them plan for offshore wind development in Newfoundland and Labrador, and complete impact assessments of offshore wind projects. Federal and provincial Ministers appointed an independent committee, comprising five members of diverse backgrounds and expertise to conduct the assessment.

Moored instrument time series data include current velocity, temperature, salinity, oxygen, fluorescence, transmissivity, turbidity, and particle capture of carbon, nitrogen, and silicon as well as sediment trap, ice drift and ice draft data.These data were collected by researchers from the Institute of Ocean Sciences, Sidney, BC, from locations ranging from the North Pacific, the Beaufort Sea, and across the Canadian Arctic Archipelago to Baffin Bay.

Draft viewlines originating from viewpoints and leading into viewscapes for the Cariboo Region.

Draft viewpoints leading to viewlines and into viewscapes for the Cariboo Region.

Moored instrument time series data include current velocity, temperature, salinity, oxygen, fluorescence, transmissivity, turbidity, and particle capture of carbon, nitrogen, and silicon. Also included are sediment trap, ice drift and ice draft data.These data were collected by researchers from the Institute of Ocean Sciences, Sidney, BC, from locations ranging from the Beaufort Sea, and across the Canadian Arctic Archipelago to Baffin Bay.The data links below are only a representative sample of the entire collection. If you require more data, please send your request to the data contact.

Fisheries and Oceans Canada (DFO) has worked with partners and ocean users to develop a draft conservation network plan for the Scotian Shelf-Bay of Fundy Bioregion. This work led to the 2017 draft conservation network plan. The draft plan was updated after targeted consultations from 2021 to 2022. The latest draft reflects new science information on climate change, updated human-use activities (such as fisheries data), and feedback from consultations.This dataset includes the latest existing and proposed conservation sites in the Scotian Shelf-Bay of Fundy Bioregion. Existing sites:-Marine Protected Areas (MPAs)-Marine refuges-Migratory bird sanctuary, National Wildlife area and National Park with marine componentsProposed sites:-Areas of Interest (AOIs) and their lead agency-Tier 1 sites are a higher priority for implementation because of their ecological characteristics and/or feasibility considerations, such as interest from Rightsholders, other levels of government, marine users and stakeholders. Some of these sites could be selected for advancement by 2030. The lead federal agency is specified for most Tier 1 sites.-Tier 2 sites are also important contributions to the conservation network, but will not be considered for advancement by 2030. Most of these sites require more research and information on ecological features and human uses before implementation.Proposed conservation sites:1 Cobequid Bay2 Southern Bight3 Chignecto Bay4 Salmon Rivers5 Bay of Fundy Horse Mussel Aggregations6 Maces Bay7 Deadmans Harbour8 Bocabec Bay – Midjic Bluff9 Oak Bay10 Tongue Shoal11 Pendleton – Little L’Etete Passage12 Simpsons Island – White Horse Island13 Head Harbour Passage14 Western Passage North15 Western Passage South16 South Campobello17 The Wolves – Wolves Bank18 Northwest Grand Manan19 Long Island Bay – Great Duck Island20 North of Nantucket Island21 Grand Harbour22 Seal Cove – Long Pond Bay23 Southern Head24 Three Islands25 Old Proprietor Shoal – The Prong26 Brier Island27 Lurcher Shoal28 Chebogue29 Eel Bay30 McNutts Island31 Pemsɨk32 LaHave Islands33 Sambro Ledges – Prospect34 Martinique Beach and Musquodoboit Harbour35 St. Mary’s (Napu’saqnuk) River and Estuary36 Country Island37 Canso Ledges – Sugar Harbour Islands38 MacNamaras Island39 Fleur-de-Lis Coast40 Bird Islands41 Ingonish Bays42 Aspy Bay43 Bras d’Or Lake44 Southwest Bank45 Western Jordan Basin46 Georges Bank47 LaHave Basin48 Scotian Gulf49 Central Scotian Slope, Rise and Abyss50 Emerald Basin Extension51 Inner Shelf Sea Pen Field52 Sable Island Bank North53 Sable Island Bank South54 Logan Canyon55 Canso Bank and Channels56 Misaine Bank and Laurentian Channel57 Eastern Shoal58 Cold SeepsBoundaries are preliminary and subject to change following public consultation.

A mapped draft area of habitat with associated species-specific management requirements with the intent to become approved under the authority of the Forest Practices Code and the Forest and Range Practices Act. A mapped area of habitat required for the winter survival of ungulate species. Associated with the mapped areas are species-specific management requirements. This dataset contains draft UWR for the Peace Region. These polygons have not yet reached stage 3 of the designation process; this means they have been accepted by regional biologists, have proposed measures associated, and are in review/comment stage.

STE_SCANNED_MAP_BOUNDARY_SP includes an index of the mapsheet grid location of Soils, Terrain, Ecosystems and related scanned maps (including Agriculture Capability and Climate Capability maps). These maps are intended for on-screen viewing or printing. The majority of the maps have been geo-referenced. Mapping may not cover the whole map grid area. Some maps are interim or draft and may have been superseded. Some files are of related legends and map project text. Associated scanned map boundary attributes describe the project map (project level metadata) and provide a link for downloading the map, plus links to related reports, geo-referenced maps, and GIS digital data available from other sources. ATTENTION - The IMAGE_URL link is only useable by BC government staff. Public users can download the scanned maps by using the ECOCAT_URL link. There is no charge for the scanned map files. Please note that some maps and more recent mapping may also be available in digital GIS format. See - Ecosystem and Terrain Mapping Data Inventory.

Canadian Hydrographic Service (CHS) has made available all the publishable limits of modern day surveys whose data has been collected since 1989.

“Ecumene” is a term used by geographers, meaning “inhabited lands.” Populated places in the ecumene database are referenced using natural boundaries, as opposed to administrative or census boundaries, and provide a more suitable means for integrating socio-economic data with ecological and environmental data in a region.The Canadian Ecumene GeoDatabase 3.0 includes the custom boundaries for more than 3,000 populated areas across Canada, many of which were derived from remote-sensing “night-lights” imagery. Each ecumene place has a corresponding set of attributes pertaining to place name, province, ecozone, indigenous communities, and other descriptive information, as well as an initial custom set of demographic variables derived from Statistics Canada Census and National Household Survey data for 2001, 2006, 2011 and 2016. A number of additional layers are also included that map the extents of Canada's ecumene in alternate ways, using transportation and utility networks, nightlights imagery, and population density.(NOTE: In the list below, the V2 Shape, KML, and TIFF files have not changed for the CanEcumene 3.0)Provided layer: The Canadian Ecumene (CanEcumene) 3.0 GIS Database============================================================================================Database Citation (Update):Eddy, B.G., Muggridge, M., LeBlanc, R., Osmond, J., Kean, C., and Boyd, E. 2023. The CanEcumene 3.0 GIS Database. Federal Geospatial Platform (FGP), Natural Resources Canada. https://open.canada.caMethods Publication Citation:Eddy B, Muggridge M, LeBlanc R, Osmond J, Kean C, Boyd E (2020) An Ecological Approach for Mapping Socio-Economic Data in Support of Ecosystems Analysis: Examples in Mapping Canada’s Forest Ecumene. One Ecosystem 5: e55881. https://doi.org/10.3897/oneeco.5.e55881