The data, created in ArcGIS, represents an assessment of air quality risk for the agricultural area of Alberta in 2005. Agricultural activities that may have some influence on air quality manure production (odour) and cultivation intensity (particulate matter). The airsheds of the agricultural region of Alberta are considered to be uniform in their physical susceptibility to risk from agricultural activities. Air quality risk is a useful measure for those concerned about health, safety and nuisance issues related the quality of air in agricultural areas. Awareness of where agricultural activities related to livestock production and intensive cultivation are located, may be useful for people with health or nuisance related concerns. Blowing soil can cause respiratory problems and can reduce visibility on roads and highways. Dust from farm traffic can be a concern during peak agricultural activity, such as harvesting or manure hauling. Frequent strong odours can be unpleasant nuisance for neighbours. In areas of greater air quality risk, environmental farm planning can help to address the issues and provide solutions. Practices including pen/barn maintenance, method of manure application, manure storage, composting, adjusting, feed rations and reducing or eliminating tillage can be looked at in an environmental farm plan.

Patterns of wet deposition of the nitrate (NO3), non-sea-salt sulfate (xSO4) and ammonium (NH4) ions across areas of Canada and the United States are based on measurements of precipitation depth and ion concentrations in precipitation samples. xSO4 refers to the wet deposition of sulfate with the sea-salt sulfate contribution removed at coastal sites. These measurements were collected and quality controlled by their respective networks: in Canada, the federal Canadian Air and Precipitation Monitoring Network (CAPMoN) and provincial or territorial networks in Alberta, New Brunswick, the Northwest Territories, Nova Scotia, Ontario and Quebec. In the United States, wet deposition measurements were made by two coordinated networks: the National Atmospheric Deposition Program (NADP) / National Trends Network (NTN) and the NADP/Atmospheric Integrated Research Monitoring Network (AIRMoN). Only data from sites that were designated as regionally representative were used in the mapping. Wet deposition amounts were interpolated by ordinary kriging using ArcMap Geostatistical Analyst. The map is limited to the contiguous U.S. and southeastern or southern Canada because outside that region, the interpolation error exceeds 30% due to the larger distances between stations. Links to annual and five-year average maps are available in the associated resources.

This new data class brings over data from the Waste Management Information System (WMIS), which is a Microsoft Access based database used by the Ministry of Natural Resources (MNR) to track Waste Management Sites. This was married with the spatial data from Waste Disposal Sites where possible Different Waste Disposal Site types collected by the Ministry of Natural Resources include: * Compost Disposal * Hazardous Waste Disposal * Household Waste Disposal * Industrial Waste Disposal * Septic Drying Bed * Septic Field * Sewage Disposal * Tile Bed * Transfer Station This product requires the use of geographic information system (GIS) software.

The Regional Deterministic Air Quality Analysis (RDAQA) is an objective analysis of surface pollutants which combines numerical forecasts from the Regional Air Quality Deterministic Prediction System (RAQDPS) and hourly observational data from monitoring surface networks over North America in order to produce a better description of the air quality at every hour. Chemical constituents include 03, SO2, and NO2 gases, as well as fine particulate matter PM2.5 (2.5 micrometers in diameter or less) and coarse particulate matter PM10 (10 micrometers in diameter or less). Geographical coverage is Canada and the United States. Data is available only for the surface level, at a horizontal resolution of 10 km. The products are presented as historical, annual or monthly, averages which highlight long-term trends in cumulative effects on the environment.

Total soil moisture is the modelled amount of plant available water (mm) in the root zone of the soil. The value given is the amount calculated to be present on the modeled day of the product.Values are computed using the Versatile Soil Moisture Budget (VSMB)

The National Pollutant Release Inventory (NPRI) is Canada's public inventory of pollutant releases (to air, water and land), disposals and transfers for recycling.The files below contain a map of Canada showing the locations of all facilities that reported disposals and transfers to the NPRI in the most recent reporting year, by reported total quantities. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting facilities, a dataset is available in an csv format.Please consult the following resources to enhance your analysis:- Guide on using and Interpreting NPRI Data: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/using-interpreting-data.html - Access additional data from the NPRI, including datasets and mapping products: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/tools-resources-data/exploredata.html

Results of the last hour available, in real time, of the [Air Quality Index (AQI)] (https://www.iqa.environnement.gouv.qc.ca/contenu/index.asp) for the stations of the [Quebec Air Quality Monitoring Network] (https://www.environnement.gouv.qc.ca/air/reseau-surveillance/Carte.asp). These results exclude those from stations located on [Montreal Island] (https://www.donneesquebec.ca/recherche/dataset/vmtl-rsqa-indice-qualite-air).The IQA is an information and awareness tool designed to inform the population about the quality of ambient air in Quebec.If you have any questions about this data, contact the Info-Air department:.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Orders in Council (OIC) are regulations or legislative orders in relation to and authorized by an existing Act. This table identifies Yukon lands withdrawn from disposal, usually by Territorial Order in Council. In Corporate Spatial Warehouse (CSW) data is split out into spatial views by Act under which orders are authorized. The tables are comprehensive and include both active and expired orders. Spatial views show only the active data.In this table and spatial views, Regulations by Order in Council (OIC) are spatially represented to provide clarity regarding Yukon lands withdrawn from disposal. Spatial data is viewed by the Act under which the order is authorized. Not all orders are for withdrawal, different levels of withdrawal are common and not detailed in GIS attributes. It is important to read OIC documents for specific details ( [https://legislation.yukon.ca/legislation/page_a.html](https://legislation.yukon.ca:443/legislation/page_a.html) ).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The National Pollutant Release Inventory (NPRI) is Canada's public inventory of pollutant releases (to air, water and land), disposals and transfers for recycling.The files below contain a map of Canada showing the locations of all facilities that reported direct releases of Criteria Air Contaminants to the NPRI. The data are for the most recent reporting year, by reported total quantities of these releases. The map is available in both ESRI REST (to use with ARC GIS) and WMS (open source) formats. For more information about the individual reporting facilities, a dataset is available in a CSV format.Please consult the following resources to enhance your analysis:- Guide on using and Interpreting NPRI Data: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/using-interpreting-data.html - Access additional data from the NPRI, including datasets and mapping products: https://www.canada.ca/en/environment-climate-change/services/national-pollutant-release-inventory/tools-resources-data/exploredata.html

Regional Deterministic Air Quality Analysis (RDAQA) is an objective analysis of surface pollutants that combines numerical forecasts from the Regional Air Quality Deterministic Prediction System (RAQDPS) with hourly observations from various monitoring networks in North America, including the Canadian measurement networks operated by the provinces, territories and certain cities, as well as the various American networks in the context of the AIRNow program administered by US/EPA (US Environmental Protection Agency). RDAQA analysis provides the best description of current air quality conditions, and is used to inform the public, meteorologists in the various Environment and Climate Change Canada forecasting offices, Health Canada and other users about the distribution of air pollutants near the ground, and the performance of forecasting models. Each hour, a preliminary product is available approximately one hour after the observation measurement time, while final and Firework products are available approximately two hours after the measurement time. The preliminary and final products contain analysis of the chemical constituents O3, SO2, NO, NO2, PM2.5 (fine particles with diameters of 2.5 micrometers or less) and PM10 (coarse particles with diameters of 10 micrometers or less), while the Firework product contains analysis of PM2.5 and PM10.