Broad Ecosystem Units were mapped using predictive modeling methods from various data sources (ranging from 1:50,000 to 1:250,000 in scale) and are referenced to the CanVec digital spatial framework (1:50,000). Broad Ecosystem Units (BEU) are a level in the Yukon bioclimate ecosystem classification system that represents areas with similar broad vegetation communities, terrain type (soils and topography) within bioclimate zones. Broad Ecosystem Units are described in the accompanying report "Regional Ecosystems of West-Central Yukon, Part 1: Ecosystem descriptions ".The intended application for mapped broad ecosystem units is 1:100,000 or smaller (1:100,000 - 1:250,000 scale) - interpretations derived from the map products should not be applied at more detailed scales, even though the resultant 30m raster map allows users to view results at more detailed resolutions. With new information, boundaries and designations of Broad Ecosystem Units can change. Updates to Broad Ecosystem Units occur only periodically. For the most current information, or if you have questions, please contact the Ecological and Landscape Classification Program (ELC@yukon.ca).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This dataset is used to: * assess biodiversity levels * define seed zones * map ecosystem types * set targets for the identification of natural heritage systems

Biogeoclimatic Ecosystem Classification (BEC) subzone\variant\phase boundaries with percent protected, number of overlapping protected areas and other attributes added as a result of geoprocessing in the Protected Area System Overview (PASO) application. Protected area and park representation by BEC unit provides a small scale ecosystem classification context for natural resource planning processes such as; management plans, land use zoning, environmental risk assessment, landscape analysis, habitat supply, and management of high priority species. Biogeoclimatic subzones are the basic unit of the BEC system. Subzones are grouped into biogeoclimatic zones to create more generalized units, and subdivided into biogeoclimatic variants and phases to create more specific or climatically homogeneous units. For more information on the BEC system see: http://www.for.gov.bc.ca/hre/becweb/. For important warnings about using this data for spatial analysis see the Data Quality section of the metadata

Ecosections are areas with minor physiographic and macroclimatic or oceanographic variations. There are 114 ecosections in British Columbia varying from pure marine units to pure terrestrial units. Ecosections are meant to be mapped at small scales (1:250,000) for resource emphasis and area planning

Species distribution models (SDMs) are tools that combine species observations of occurrence, abundance, or biomass with environmental variables to predict the distribution of a species in unsampled locations. To produce accurate predictions of occurrence, abundance or biomass distribution, a wide range of physical and/or biological variables is desirable. Such data is often collected over limited or irregular spatial scales, and require the application of geospatial techniques to produce continuous environmental surfaces that can be used for modelling at all spatial scales. Here we provide a review of 102 environmental data layers that were compiled for the entire spatial extent of Fisheries and Oceans Canada’s (DFO) Maritimes Region. Variables were obtained from a broad range of physical and biological data sources and spatially interpolated using geostatistical methods. For each variable we document the underlying data distribution, provide relevant diagnostics of the interpolation models and an assessment of model performance, and present the final standard error and interpolation surfaces. These layers have been archived in a common (raster) format at the Bedford Institute of Oceanography to facilitate future use. Based on the diagnostic summaries in this report, a subset of these variables has subsequently been used in species distribution models to predict the distribution of deep-water corals, sponges, and other significant benthic taxa in the Maritimes Region.Cite this data as: Beazley, Lindsay; Guijarro, Javier, Lirette; Camille; Wang, Zeliang; Kenchington, Ellen (2020). Characteristics of Environmental Data Layers for Use in Species Distribution Modelling in the Maritimes Region. Published July 2023. Ocean Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/34a917cb-a0e3-403c-91c7-af3dc20628b1

STE_SCANNED_MAP_BOUNDARY_SP includes an index of the mapsheet grid location of Soils, Terrain, Ecosystems and related scanned maps (including Agriculture Capability and Climate Capability maps). These maps are intended for on-screen viewing or printing. The majority of the maps have been geo-referenced. Mapping may not cover the whole map grid area. Some maps are interim or draft and may have been superseded. Some files are of related legends and map project text. Associated scanned map boundary attributes describe the project map (project level metadata) and provide a link for downloading the map, plus links to related reports, geo-referenced maps, and GIS digital data available from other sources. ATTENTION - The IMAGE_URL link is only useable by BC government staff. Public users can download the scanned maps by using the ECOCAT_URL link. There is no charge for the scanned map files. Please note that some maps and more recent mapping may also be available in digital GIS format. See - Ecosystem and Terrain Mapping Data Inventory.

An ecoprovince is an area with consistent climatic or oceanography, relief and regional landforms. There one oceanic, two marine / terrestrial and seven terrestrial ecoprovinces occurring within British Columbia. Ecoprovinces are meant to be mapped at 1:2,000,000 for use in provincial state of the environment reporting

Effective fisheries and habitat management processes require knowledge of the distribution of areas of high ecological or biological significance. On the Scotian Shelf and Slope, a number of benthic ecologically or biologically significant areas consisting of habitat-forming species such as sponges and deep-water corals have been identified. However, knowledge of their spatial distribution is largely based on targeted surveys that are limited in their spatial extent. We used a species distribution modelling approach called random forest (RF) to predict the probability of occurrence and biomass of sponges, sea pens, and large and small gorgonian corals across the entire spatial extent of Fisheries and Oceans Canada’s (DFO) Maritimes Region. We also modelled the rare sponge Vazella pourtalesi, which forms the largest known aggregation of its kind on the Scotian Shelf. We utilized a number of data sources including DFO multispecies trawl catch data and in situ benthic imagery observations. Most models had excellent predictive capacity with cross-validated Area Under the Receiver Operating Characteristic Curve (AUC) values ranging from 0.760 to 0.977. Areas of suitable habitat were identified for each taxon and were contrasted against their known distribution and when applicable, the location of closure areas designated for their protection. Generalized additive models (GAMs) were developed to predict the biomass distribution of each taxonomic group and serve as a comparison to the RF models. The RF and GAM models provided comparable results, although GAMs provided superior predictions of biomass along the continental slope for some taxonomic groups. In the absence of data observations, the results of this study could be used to identify the potential distribution of sensitive benthic taxa for use in fisheries and habitat management applications. These results could also be used to refine significant concentrations of these taxa as identified through the kernel density analyses.Cite this data as: Beazley, Lindsay; Kenchington, Ellen; Murillo-Perez, Javier; Lirette, Camille; Guijarro-Sabaniel, Javier; McMillan, Andrew; Knudby, Anders (2019). Species Distribution Modelling of Corals and Sponges in the Maritimes Region for Use in the Identification of Significant Benthic Areas. Published July 2023. Ocean Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/356e92f3-5bf3-4810-98b1-3e10cd7742aa

Leaf area index (LAI) quantified the density of vegetation irrespective of land cover. LAI quantifies the total foliage surface area per groud surface area. LAI has been identified by the Global Climate Observing System as an essential climate variable required for ecosystem,weather and climate modelling and monitoring. This product consists of annual maps of the maximum LAI during a grownig season (June-July-August) at 100m resolution covering Canada's land mass.

This resource documents a dataset of epifauna occurrences collected in 2021 during The Knowledge and Ecosystem-Based Approach in Baffin Bay (KEBABB) program developed by the Department of Fisheries and Oceans Canada (DFO) in collaboration with university partners. The overall objective of KEBABB is to characterize the variability and trends in physical, chemical, and biological oceanographic conditions and food webs supporting fisheries in the connected ecosystems of western Baffin Bay and Lancaster Sound. In 2021, DFO expanded the KEBABB program to Barrow Strait (KEBABS-Knowledge and Ecosystem-Based Approach in Barrow Strait), a key productive area of the Tallurutiup Imanga National Marine Conservation Area. The study took place in the Eastern Canadian Arctic (mainly in Baffin Bay, Davis Strait and Barrow Strait). Sampling is done along transects at fixed stations in the study area. Catches are collected with a 1.5 m Agassiz trawl (5 mm mesh net) for 3 minutes bottom-contact time at a target speed of 1.5 knots and with a 3 m benthic beam trawl (6.4 mm mesh net) for 15 minutes bottom-contact time at a target speed of 3 knots. A total of 16 stations were sampled for epifauna in 2021 between 85-850 m depth. Epibenthic invertebrates are identified to the lowest possible taxonomic level and photographed. All unknown specimens are frozen. In the lab, the identifications are validated or refined with the photos and the frozen specimens.The data are presented in Darwin Core and are separated in two files:The “Activité_épifaune_KEBABB_epifauna_event_en” file which contains information about missions, stations and deployments, which are presented under a hierarchical activity structure.The “Occurrence_épifaune_KEBABB_epifauna_en” file that contains the taxonomic occurrences.Further details on sampling can be found in the following report: Pućko, M., Charette, J., Tremblay P., Brulotte S., St-Denis B., Ciastek S., Hedges, K., Kuzyk, Z., Roy V., and Michel, C. 2022. An ecosystem-based approach in the eastern Arctic: KEBABB/S (Knowledge and Ecosystem-Based Approach in Baffin Bay/Barrow Strait) 2021 expedition report. Can. Manuscr. Rep. Fish. Aquat. Sci. 3250: viii + 58 p. https://publications.gc.ca/collections/collection_2022/mpo-dfo/Fs97-4-3250-eng.pdfUSE LIMITATION:To ensure scientific integrity and appropriate use of the data, we would encourage you to contact the data custodian.