To outline the locations of buildings on Parks Canada sites, buildings that Parks Canada manages, and other buildings of interest to Parks Canada. Polygon file to map building footprints of buildings on Parks Canada sites. Footprints may be derived by tracing the roof outline (for example from an airphoto) or using more detailed measurements of the ground floor.Data is not necessarily complete - updates will occur weekly.

Footprint of all buildings on the territory of the City of Repentigny.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Footprint and location of parks in the City of Repentigny.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Footprint of the elements of the roads of the City of Repentigny.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

A Yukon-wide compilation of map footprints and associated citation data for 191 published bedrock geology maps that were incorporated into the Yukon bedrock geology compilation. The maps were originally produced by the GSC, YGS, Yukon Government and various universities at various scales ranging from 1:10,000 to 1:500,000. Attribute data for each map footprint includes: year, scale, author, publisher, map number, NTS sheet and title.Distributed from [GeoYukon](https://yukon.ca/en/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Data layers show commercial fishery footprints for directed fisheries using bottom and pelagic longlines for groundfish and large pelagics respectively, and traps for hagfish, LFA 41 and Grey Zone lobster, snow crab, and other crab on the Scotian Shelf, the Bay of Fundy, and Georges Bank in NAFO Divisions 4VWX and Canadian portions of 5Y and 5Z. Bottom longline and trap fishery maps aggregate commercial logbook effort (bottom longline soak time and logbook entries) per 2-minute grid cell using 2002–2017 data. Pelagic longline maps aggregate speed-filtered vessel monitoring system (VMS) track lines as vessel minutes per km2 on a base-10 log scale using 2003–2018 data. The following data layers are included in the mapping service for use in marine spatial planning and ecological risk assessment: 1) multi-year and quarterly composite data layers for bottom longline and trap gear, and 2) multi-year and monthly composite data layers for pelagic longline gear. Additional details are available online: S. Butler, D. Ibarra and S. Coffen-Smout, 2019. Maritimes Region Longline and Trap Fisheries Footprint Mapping for Marine Spatial Planning and Risk Assessment. Can. Tech. Rep. Fish. Aquat. Sci. 3293: v + 30 p. http://publications.gc.ca/collections/collection_2019/mpo-dfo/Fs97-6-3293-eng.pdf

Many communities in Canada depend to some extent on forestry and the forest sector. The importance of the forest industry to the regional economy can be assessed using the CanEcumene GIS Database. “Ecumene” is a term used by geographers, meaning “inhabited lands.” A forest ecumene refers to areas where human settlement coincides with forested areas, including locations where people depend on the forest for their livelihood. Populated places in the ecumene database are referenced using natural boundaries, as opposed to administrative or census boundaries, and provide a more suitable means for integrating socio-economic data with ecological and environmental data in a region.An analysis of ecumene labour force data and location of mill facilities resulted in a generalized rendering showing regional dependency of the forest industry. The location of mill facilities layer includes information on mill type (i.e., pulp and saw) and ownership. The sensitivity to forest industry layer shows which forest communities and regions are more sensitive to economic impacts in the forest industry.Two layers are provided: the sensitivity of forest communities and regions to forest industry, and the location of mill facilities.

Stations containing prime movers, electric generators, and auxiliary equipment for converting mechanical, chemical into electric energy with an installed capacity of 1 Megawatt or more generated from renewable energy, including biomass, hydroelectric, pumped-storage hydroelectric, geothermal, solar, and wind.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.Parent Collection:[North American Cooperation on Energy Information, Mapping Data](https://open.canada.ca/data/en/dataset/aae6619f-f9f3-435d-bc32-42decd58b674)

This product contains contiguously settled area (CSA) boundaries for a subset of Canadian population centres for 2010 and 2020.The CSA boundaries are derived from land cover data and represent the geographic extent of settled areas based on their physical footprint on the landscape. The boundaries can be used for reference, mapping and spatial analysis of settled areas and urban ecosystems.The CSA boundaries are created and maintained under the umbrella of the Census of Environment, and will support Statistics Canada’s ecosystem accounting efforts following the System of Environmental-Economic Accounting — Ecosystem Accounting (SEEA EA) framework. The primary purpose of the CSA boundaries is to represent the extent of the contiguous urban footprint and allow for the measurement of settled area expansion over time. They will also contribute to the urban and industrial ecosystem class in Statistics Canada’s ecosystem accounting efforts. The boundaries will be used for other types of urban ecosystem analyses, including measures of urban ecosystem condition and services. The CSA boundaries may also be used for urban thematic accounts or to inform where users of ecosystem services are located.Moving forward, CSA boundaries will be updated on an ongoing basis.

Pepin et al. (2014) stated that three nested spatial scales were identified as relevant for the development of ecosystem summaries and management plans: Bioregion, Ecosystem Production Unit (EPU), and Ecoregion. A bioregion is composed by one or more EPUs, while an EPU consists of a combination of ecoregions, which represent elements with different physical and biological characteristics based on the analytical criteria applied. Pepin et al. (2014) reported on the consolidation of data and analyses of ecoregion structure for the continental shelf areas from the Labrador Sea to the mid-Atlantic Bight and provided recommendations on the definition of EPUs in the NAFO Convention Area. The results of two K-means clustering analyses (one geographically constrained and one un-constrained) and expert knowledge (including and considering location of ecoregions, knowledge of the distribution of major marine resources and fish stocks, and geographic proximity for delineation/definition of potential management units) served as guides for evaluation by NAFO’s (North Atlantic Fisheries Organization) working group on ecosystem science and assessments (WG-ESA). The final consensus from the discussions identified eight (8) major EPUs that can serve as practical candidate management units (from the 50 m isobaths, where research vessel data were available, seaward to the 1500 m isobaths) that consist of the Labrador Shelf (NAFO subareas 2GH), the northeast Newfoundland Shelf (subareas 2J3K), the Grand Banks (subareas 3LNO), Flemish Cap (subarea 3M), the Scotian Shelf (subareas 4VnsWX), Georges Bank (parts of subareas 5Ze and 5Zw), the Gulf of Maine (subarea 5Y and part of 5Ze) and the mid-Atlantic Bight (part of subarea 5Zw and subareas 6ABC). Southern Newfoundland (subarea 3Ps) was not included in the original analysis because fall survey data were unavailable. However, it was later added as an EPU after additional analysis of the fish community structure and trends using survey data from the spring, which indicated that this area is heavily influenced by the surrounding EPUs (NAFO 2015).The proposed candidate management units correspond to the EPUs that define major areas within the bioregions which contain a reasonably well defined food web/production system. The working group noted that the consensus solution represents a compromise that aims to define management units based on the boundaries of existing NAFO subareas that are appropriate for estimation of ecosystem and fishery production. References: NAFO. 2015. Report of the 8th Meeting of the NAFO Scientific Council (SC) Working Group on Ecosystem Science and Assessment (WGESA). 17-26 November 2015, Dartmouth, Canada. NAFO SCS Doc. 15/19.Pepin, P., Higdon, J., Koen-Alonso, M., Fogarty, M., and N. Ollerhead. 2014. Application of ecoregion analysis to the identification of Ecosystem Production Units (EPUs) in the NAFO Convention Area. NAFO SCR Doc. 14/069.